DIY PCB Circuit Board 5MOS Welding Equipment Portable 12V Battery Storage Spot Welding Machine with Spot Welders Pen for 18650/26650
$36.07
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
Lithium battery, advantages:portable, stable and reliable, and durable.
Users need to supply 12V battery power, welding current is about 90A ~ 150A, for the common 18650/26650/32650 0.1mm ~ 0.15mm nickel plated welding. After several generations of product updates, it is now upgraded to automatically trigger the welding, liberating the buttons of the fingers.
Switch function:press the switch for 1.5 seconds to switch (blue light:low power, green light:medium power, red light:high power)
Power supply requirements
System voltage:12V-14.6V (It will stop<12V)
Current requirements:150A or more instantaneous output (such as car starter power supply, 3S RC high-power battery pack, 20A lead-acid battery with good performance above 20A)
Misunderstanding:Don’t think that you can use 3 series 18650 series to supply power. After all, the conventional 18650 only has 3-5C discharge rate, so each section can only provide 2.5A*3=7.5A load capacity, which is far from 150A unless 20 Parallel connection, 3 series and 60 sections of 18650 are possible, but it is obviously unrealistic.
Features
1. it is equipped with a 3.7-4.2V 4.5ah power lithium battery with a discharge rate of 100C and a load capacity of about 400A.
2. Through the MOS tube output, this energy will be concentrated at the end of the welding pen, and it will be heated by short circuit.
3. Fuse the nickel sheet firmly with the battery. All this will happen in milliseconds,And it is precisely controlled by the single-chip microcomputer program without trigger switch.
4. Free your fingers or foot pedals completely.
5. Comes with a charging control module, which charges the battery through the USB port, and is charged with hundreds of welding points on commonly used nickel-plated sheets within 0.1mm-0.15mm.
Battery recommendation
(1) 20-45ah Lead-acid battery with good performance and small internal resistance
(2) 3.5-5.5ah 45C 3S aeromodel lithium battery pack
(3) 30-35ah capacity 18650 battery pack
Package Included
1 x Main Board
2 x 10AWG Input Wires
2 x Spot Soldering Pens
Weight | 0.132 kg |
---|
Customers Also Viewed
10Pcs 50cm Fishing Lures 316 Stainless Steel Wire Trace Leader Spinner Swivel Line
$14.16Switch AccessoriesAdd to cartSpecificationMaterial:316 Stainless steel & nylonColor:RedLength:50cmQuantity:10pcs/setFeatures-With black nickel rolling swivel and cross lock snap-Durable enough to prevent breakage of the wire when the fish is fighting-Capable to handle up to 50kgPackage Includes10x trace wires
5pcs 12-60V Car Lead Acid Battery Charge Level indicator Battery Tester Lithium Battery Capacity Meter Dual Red LED Tester Digital Voltmeter
$22.60Electronic Accessories & SuppliesAdd to cartDescriptionThis power meter is suitable for 12V, 24V, 36V, 48V, 60V, battery cars (not waterproof). It can also measure lithium batteries, polymer batteries, nickel-metal hydride batteries. Can also be used for other power / voltage measurement purposes.How to use:Connect the positive and negative terminals of the display board to the positive and negative terminals of …
5Pcs PCI-E 6-pin To 2x 6+2-pin Power Splitter Cable PCIE PCI Express
$19.22Electronic Accessories & SuppliesAdd to cartDescriptionConnect any graphics card to a single 6-pin PCI-Express Power Cable. The 6+2-pin maleconnectors offer maximum versatility.Warning:Do not overload your power supply or the 6-pin power cable, running more than 300Wover a single 6-pin 18AWG PCI-Express cable is a fire hazard.Connectors:6-pin PCIe Female, 5x 6+2-pin PCIe MaleLength:8 inches / 20cmWire:18 AWG copperPackage included5 x PCI-e …
5Pcs PCI-E 6-pin To 2x 6+2-pin Power Splitter Cable PCIE PCI ExpressRead More
DC 12V 4CH Wireless Remote Control Relay Switch 2 Transceiver with 1 Receiver 315MHz
$19.67Smart ModuleAdd to cartFeaturesIt is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the transmitter. It has 4 Relays which can make the equipment turn or reverse, on/off and so on come true. The volume is small and the performance is stable …
DC 12V 4CH Wireless Remote Control Relay Switch 2 Transceiver with 1 Receiver 315MHzRead More
5pcs 2.4G NF-04 Wireless SPI Module BK2425 250k~2Mbps Transparent Transmission Receiver for Doorbell Remote Control Switch
$11.42Smart ModuleAdd to cartIntroductionNF-04 is a 2.4G wireless module with small size and on-board antenna. It has a high airspeed (up to 2Mbps), SPI interface, and a pure hardware module. It has high stability, high cost performance and good spectrum test characteristics. , small size, using all industrial grade components.NF-04 can be widely used in various Internet of …
PEB-1 Expansion Board +TSOP48 Socket + FPC Row Line FPC Base
$83.13Electronic Accessories & SuppliesAdd to cartFeaturesPEB – 1 extension board, supporting RT809F use, support notebook IT8586E/IT8580E models such as EC, support the notebook, computer motherboards commonly used 32/40/48 feet BIOS chips (29/39/49/50 series FWH/LPC / 8 bit / 16 bit NOR flash), contact with pin detection, automatic identification of short circuit protection and unique features, to read and write speed …
PEB-1 Expansion Board +TSOP48 Socket + FPC Row Line FPC BaseRead More
Smart Robot Chassis Car Kit with 2Pcs Motor+ Speed Encoder + Battery Box for Arduino – products that work with official Arduino boards
$26.57Smart Robot & Solar PanelAdd to cartFeaturesMechanical structure is simple, it is easy to install.This car is the tachometer encoder.Can be used for distance measurement.Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing, wireless remote control.Download:www.uctronics.com/download/U3800.zipMotor ParametersVoltage:DC 3V:DC6V:DC 7.2VCurrent:160mA:220mA:250mANo-load Speed:120 rpm/min:200 rpm/min:250 rpm/minLoad Speed:100 rpm/min:175 rpm/min:210 rpm/minTorque:0.45 kg.cm:1.0 kg.cm:1.5 kg.cmReduction Ratio:1:48Noise:65dBMotor Size:65mm x 18mm …
3Pcs Fever Debuggable HIFI Speaker High and Low Sound 2-way Speaker Audio Crossover Kit
$21.65DIY Electronic KitsAdd to cartDescriptionHigh and low sound two-way, can be used for home audio, or car audio. High-quality components, fine workmanship. The four modes of high and low sound are adjustable, the whole process is free of welding, the use is simple and convenient, and the distribution of high and low sounds is more precise.Size:45*28mmPackage included3 x Two-way …
3Pcs Fever Debuggable HIFI Speaker High and Low Sound 2-way Speaker Audio Crossover KitRead More
Reviews
There are no reviews yet.