Original JYETech 15801K DIY WAVE2 DSO150 Touch Screen Dual Channel Digital Storage Oscilloscope Kit
$140.82
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
JYE TECH WAVE2 is the latest 2-Channel Oscilloscope on the market, catered to hobbyists, educational institutions and professionals in the field of electronics and mechatronics. Featuring a bright and easy-to-use color touch screen display with access to many features only advance oscilloscopes offer such as built-in function generator and X-Y plotting. With an optional battery, it is portable enough to be taken wherever the jobs that need to be done is. Its an exciting project for any DIY-er, or can be purchased fully assembled for those who are looking to start using it right away. It comes with everything you need out of the box, with a micro-USB cable and two high-quality BNC probes. Enjoy and start creating!
For data transfer and program update, please buy product ID:1597439
Documents
WAVE2 Quick Start Guide
WAVE2 Assembly Guide
Main board schematic
Analog board schematic
Highlights of WAVE2
Channels:2
Bandwidth:0-200KHz per channel
Sensitivity range:5mV/DIV-20V/DIV (using x1 probe)
Maximum input voltage:50Vpk (using x1 probe)
Maximum real time sampling rate:1MS/s
Time Base range 10us/DIV-500s/DIV
X-Y Display Feature:Yes
Function Generator Capability:Built-in 0 20KHz (sine) dual channel DDS function generator
Display Resolution:320 x 240 Color display
Display Size:2.4▼
Touch Display Capability:Yes
Battery powered and portable (battery not included in DIY Kit)
General
Touch panel operation
Y-X mode available
Built-in 2-channel DDS function generator
Light weight and portable
Vertical
Number of Channel:2
Analog Bandwidth:DC-200KHz
Sensitivity:5mV/Div – 20V/Div (with x1 probe)
Sensitivity error
Resolution:12-bit
Input Impedance:1M ohm / 25pF
Maximum Input Voltage:50Vpk
Coupling:DC, AC
Horizontal
Max Real-time Sampling Rate:1Msps (per channel)
Timebase:10us/Div – 500s/Div
Record Length:1024 points
Trigger
Trigger Modes:Auto, Normal, Single
Trigger Types:Rising/falling edge
Trigger Position:1/2 of buffer size
Trigger Source:Ch1, Ch2, External
Maximum external trigger voltage:15V
External trigger threshold
Function Generator
Number of channel:2
Waveform type:Sine, Square, Saw-tooth, Stair
Frequency range:DC-20KHz (Sine)
Amplitude range:0-3V (peak value)
Offset:0V or +3.3V
Duty Cycle:0- 100%
Phase:-360~360 degree
Power Supply
Powered on 3.7V Li-ion battery or USB
Current consumption:~300mA @ 3.7 5V
Internal batter charger (optional)
Automatic power off on battery
Battery running time:Appr. 3hrs (when fully charged)
Other Features
Y-X display mode
On-screen measurement display
Save / recall up to 4 captures
Serial output of captured data
Serial port format:LVTTL, 115200bps, 8N1
Built-in 1KHz/3.3V test signal
Package included
1 x WAVE2 oscilloscope DIY kit
1 x 117 board and one 118 board
2 x BNC x1/x10 selectable probes
Weight | 0.35 kg |
---|
Customers Also Viewed
Multiple Car Toys Magnetic Puzzle Box Book Educational Book Kids Learning Gift
$52.64MathematicsAdd to cartPackage included10 x Card76 x MagnetsFeatures1.Developing kids’ intelligence.2.Teaching kids to know more words.3.Easy for storage.SpecificationsColor:MulticolorMaterial:Paperboard, MagnetismSize:30x4x21.5cm
Basic Starter Kit UNO R3 Mini Breadboard LED Jumper Wire Button with Box for Geekcreit for Arduino – products that work with official Arduino boards
$18.62Module KitsAdd to cartDescriptionsPerfect for Shield Prototyping and TestingPlastic housing, metal contact clipsAccept wire with diameter 20-29AWGVolatge/current:300V/3-5A400 tie-point2 Power Lanes, Tie-point 1001 Double-strip, Tie-point 300Solderless Breadboard Size:82x55x8.5mmPackage included1 x Uno R3 Development Board1x 400 hole Breadboard10 x 220Ω resistor 5% carbon film10 x 1k resistor 5% carbon film10 x 10k resistor 5% carbon film10 x 100k resistor 5% …
3pcs ESP32-S WiFi + Bluetooth ESP32S Serial to WiFi Dual Antenna Module
$29.27Smart ModuleAdd to cartDescriptionThe main chip uses a low-power dual-core 32-bit CPU with a frequency of up to 240MHz and computing power of up to 600DMIPS.Default 32Mbit SPI Flash, 520KB SRAMSupport SoftAP and Station modeUltra-small 802.11b/g/n Wi-Fi + BT/BLE SoC moduleSupport UART/SPI/I2C/I2S/PWM/ADC/DAC, etc.Support for firmware upgrade (FOTA)Antenna supports onboard antenna or IPEX block outputPackage includes3 x Wifi module
Geekcreit 433MHz DC 12V 10A Relay 1CH Channel Wireless RF Remote Control Switch Transmitter with Receiver
$15.30Smart ModuleAdd to cartIf you need more Transmitter, please buy Product ID:1215079>>>Manual:Click here to openFeaturesEasy to install and easy to carryWith a slidable cover on the remote controlWith a hook on the remote controlUse Learning coding, stable and reliableThe wireless signal can pass through walls, floors and doorsYou can turn on or turn off the receiver with transmitter …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStream
$56.69Electrical Pump & ValveAdd to cartFeature*CO2 Refill Adapter is used to fill CO2 into your Sodastream tank.*Adjustable valve pin ensures compatibility with any cylinder valve variation.*Easy to install and use.*Made of high quality metal, high hardness and durable.Specification*Material:Metal*Color:Silver (As Pictures Show)*Inner Thread:TR21-4*Outer Thread:W21.8-14Package Contents1*CO2 Refill AdapterNotes:The real color of the item may be slightly different from the pictures shown on …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStreamRead More
30pcs 2.5-5.5V TTP223 Capacitive Touch Switch Button Self Lock Module
$15.15Other Module BoardAdd to cartFeatures 1. Size:15*11mm 2. Power:2.5-5.5V 3.Trigger setting mode:(1->Short;0->No Short) AB=00:No-lock High TTL level output; AB=01:Self-lock High TTL level output; AB=10:No-lock Low TTL level output; AB=11:Self-lock Low TTL level output; Package included 30 x 2.5-5.5V TTP223 Capacitive Touch Switch Button Self-Lock Module For
NE555 Pulse Module LM358 Duty and Frequency Adjustable Square Wave Signal Generator Upgrade Version
$6.55Test & Measuring ModuleAdd to cartFeature1. Used as a square wave signal generator to generate square wave signals for experimental development.2. Used to generate a square wave signal that drives the stepper motor driver.3. Generate adjustable pulses for use by the MCU.4. Generate adjustable pulses to control the associated circuitry.Description1. Size:3.5CM * 4.6CM1. The main chip:LM358;2. Input voltage:5V-12VDC.3. Input current:≥100MA;4. …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module Kit
$13.73DIY Electronic KitsAdd to cartFeatureModel:AUL-10Supply voltage:DC9V-12VAudio input:0~1.5VrmsPCB size:66 x 28mm (L x W)Light row size:62.5 x 5 x 10.7mm (L x W x H)Two indication modes:bar indication and fire spot indication (Realized by MOD short-circuit point)Lamp row offers two kinds of vertical and horizontal installationTin-treated solder padsNote:Before power on, please confirm the polarity of the power supply is correct …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module KitRead More
Reviews
There are no reviews yet.