JDY-40 2.4G Wireless Serial Port Transmission And Transceiver integrated Remote Communication Module
$6.55
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
JDY-40 is developed with 2.4G technology, the sight distance is 120 meters, using serial port communication interface, using simple and fast, only need to understand the serial knowledge of the JDY-40 can be applied to the product!
Pin function description
Pin:The name of the discipline:Function
1:GPI01:Input-output IO, which can be configured by AT+CLSS
2:GPI02:Input-output IO, which can be configured by AT+CLSS
3:GPI03:Input-output IO, which can be configured by AT+CLSS
4:GPI04:Input-output IO, which can be configured by AT+CLSS
5:GPI05:Input-output IO, which can be configured by AT+CLSS
6:GPI06:Input-output IO, which can be configured by AT+CLSS
7:GPI07:Input-output IO, which can be configured by AT+CLSS
8:GPI08:Input-output IO, which can be configured by AT+CLSS
9:VCC:Power supply (2.2-3.6)
10:RXD:Serial port input pin
11:TXD:Serial port output pin
12:SET:AT command switching pin (low level AT instruction, high level transparent transmission)
13:CS:Transmission or push button mode:CS pin (low level wake-up, high level sleep).
IO receive mode:the CS pin needs to be suspended or pulled up
14:GND:Power supply
Application scene
1:2.4G panel switch
2:2.4G remote control
3:2.4G transmission
4:one to many control of mobile phone
5:IO switching control
6:2.4G toys
7:smart home control application
Technical parameter
Model:JDY-40
Working band:2.4G
Emissive power:Maximum 12dB
working temperature:-40 C – 80 C
Reception sensitivity:-97db
transmission distance:120 meters
working voltage:2.2V-3.6V
TX current:40mA
RX current:24mA
Sleep current:5uA
communication interface:Standard TTL serial port
Default configuration
Specification:Function:Parameter:Instructions
1:baud rate:9600:AT+BAUD
2:wireless ID:8899:AT+RFID8899
3:device ID:1122:AT+DVID1122
4:channel:001:AT+RFC001
5:emissive power:12db:AT+POWE9
6:equipment type:A0:AT+CLSSA0
Communication
it is necessary to configure the RFC, DVID, and RFID that need the communication module to be the same. The module and the module can communicate. When the module comes out, the parameters are all unified, and the user can configure it according to its own needs.
AT instruction instructions
Specifically, the JDY-40 module needs to add the ending symbol rn to send the AT instruction.
Set / query – baud rate
instructions:response:response
AT+BAUD
OK:Param(1-7)
1:1200
2:2400
3:4800
4:9600
5:14400
6:19200
Default value:4
AT+BAUD
+BAUD=
Set / query -RFID
instructions:response:response
AT+RFID:OK:Param(0000-FFFF)
Default value:8899
AT+RFID:+BAUD=
Set / query -DVID
instructions:response:response
AT+DVID:OK:Param(0000-FFFF)
Default value:8899
AT+DVID:+BAUD=
Set / query -RFC
instructions:response:response
AT+RFC:OK:Param(001-128)
Default value:001
AT+RFC:+RFC=
Set / query -POWE
instructions:response:response
AT+POWE
OK:Param(0-9)
0:-25db
1:-15db
2:-5db
3:0db
4:+3db
5:+6db
6:+9db
7:+10db
8:+10db
9:+12db
Default value:9
AT+POWE
+POWE=
Set / query -CLSS
instructions:response:response
AT+CLSS
OK:Param
A0:serial port transmission (transceiver)
C0:remote control or IO button with indicator (transmitter).
C 1:remote control or IO button without indicator (transmitter).
C 2:IO normally high level, after receiving the signal, low level, delay.
High level after 30mS
C 3:IO is usually low level, after receiving the signal, the high level has been
Recovery of low level after delayed 30mS
C 4:IO is usually low level, and receives the high level of the pressed signal.
Receive raised signal low level
The IO level is reversed when the C 5:IO receives the pressed signal.
Default value:A0
AT+CLSS
+CLSS=
Package included
1 x JDY-40 2.4G Wireless Serial Port Transmission And Transceiver Integrated Remote Communication Module
Weight | 0.012 kg |
---|
Customers Also Viewed
Christmas LED Colorful Luminous Mask Stage Bungee USB Charging EL Cold Light Mask
$24.04EL ProductsAdd to cartDescriptionProduct Name:Colorful Luminous MaskProduct material:luminous sourceProduct size:19*10CMLight color:color gradient / breathing light dimming power supply mode:USB charging 3.7V, 400 mAProduct use time:charging for 1-2 hours, continuous light for about 10-12 hoursProduct unit weight:about 60 gramsPackage included1 x Christmas mask
20pcs N/O N/C Emergency Stop Switch Push Button Mushroom 4 Screw Terminals
$58.87Electronic Accessories & SuppliesAdd to cartSpecificationTwo switching circuits:1 Normally Open + 1 Normally Closed (DPST:Double-Pole-Single-Throw)Stackable contacts:mix and match to suit your needContact rating:600V / 10ANumber of terminals:4Panel cut out diameter:22mmDepth behind panel:44.5mmButton diameter:40mmPackage included20 x Emergency stop switch
USB to Pin Module USB interface Converter Board Electronic Building Blocks for
$3.67Converter BoardAdd to cartFeatureSize:24 x 21 x 10mmFixing hole:3mmPitch:600mil (15.24mm)Interface:A-type USB holderApply:Change the USB interface to pins, easy to connect the target devicePackage includes1 x USB to Pin Module
5pcs SHT21 Temperature and Humidity Sensor Module High Precision Environmental Measurement Smart Home
$53.30Sensor & Detector ModuleAdd to cart>>>Manual:Click here to openParameterWorking voltage:3VRelative humidity:0~100%RHTemperature:-40~+125°CCommunication method:IIC interfacePlease refer to the product manual for more information:Click here to open.Package includes5 x Sensor module
RF Wideband Low Noise Amplifier 0.1-2000MHz Gain 32dB High Frequency Amplifier with Shell
$81.72RF amplifierAdd to cartDescriptionThis amplifier has the advantages of wide frequency range, high gain, low noise figure, etc. It can be used in various radio frequency receiving front ends to increase the communication distance! Wide range of shortwave, FM broadcasting, remote control receivers, cable TV signal amplifiers and other places where low-noise and small-signal radio frequency amplification is …
RF Wideband Low Noise Amplifier 0.1-2000MHz Gain 32dB High Frequency Amplifier with ShellRead More
5pcs Miniature Digital Recording Voice IC Chip Module Movement Recorder Recording Pen Music Card
$19.64DIY Electronic KitsAdd to cartFeatureEasy to use 6 seconds voice recording, high quality, clear voice reduction, can be used as a micro recorder, recordingpen, megaphone, recording greeting card module, this module can drive 8 euro 0.5W speakers. Operating InstructionsRecording button; press and hold the button to stop recording (recording will begin to drop a sound), let go of recording …
Reviews
There are no reviews yet.