JDY-40 2.4G Wireless Serial Port Transmission And Transceiver integrated Remote Communication Module
$6.55
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
JDY-40 is developed with 2.4G technology, the sight distance is 120 meters, using serial port communication interface, using simple and fast, only need to understand the serial knowledge of the JDY-40 can be applied to the product!
Pin function description
Pin:The name of the discipline:Function
1:GPI01:Input-output IO, which can be configured by AT+CLSS
2:GPI02:Input-output IO, which can be configured by AT+CLSS
3:GPI03:Input-output IO, which can be configured by AT+CLSS
4:GPI04:Input-output IO, which can be configured by AT+CLSS
5:GPI05:Input-output IO, which can be configured by AT+CLSS
6:GPI06:Input-output IO, which can be configured by AT+CLSS
7:GPI07:Input-output IO, which can be configured by AT+CLSS
8:GPI08:Input-output IO, which can be configured by AT+CLSS
9:VCC:Power supply (2.2-3.6)
10:RXD:Serial port input pin
11:TXD:Serial port output pin
12:SET:AT command switching pin (low level AT instruction, high level transparent transmission)
13:CS:Transmission or push button mode:CS pin (low level wake-up, high level sleep).
IO receive mode:the CS pin needs to be suspended or pulled up
14:GND:Power supply
Application scene
1:2.4G panel switch
2:2.4G remote control
3:2.4G transmission
4:one to many control of mobile phone
5:IO switching control
6:2.4G toys
7:smart home control application
Technical parameter
Model:JDY-40
Working band:2.4G
Emissive power:Maximum 12dB
working temperature:-40 C – 80 C
Reception sensitivity:-97db
transmission distance:120 meters
working voltage:2.2V-3.6V
TX current:40mA
RX current:24mA
Sleep current:5uA
communication interface:Standard TTL serial port
Default configuration
Specification:Function:Parameter:Instructions
1:baud rate:9600:AT+BAUD
2:wireless ID:8899:AT+RFID8899
3:device ID:1122:AT+DVID1122
4:channel:001:AT+RFC001
5:emissive power:12db:AT+POWE9
6:equipment type:A0:AT+CLSSA0
Communication
it is necessary to configure the RFC, DVID, and RFID that need the communication module to be the same. The module and the module can communicate. When the module comes out, the parameters are all unified, and the user can configure it according to its own needs.
AT instruction instructions
Specifically, the JDY-40 module needs to add the ending symbol rn to send the AT instruction.
Set / query – baud rate
instructions:response:response
AT+BAUD
OK:Param(1-7)
1:1200
2:2400
3:4800
4:9600
5:14400
6:19200
Default value:4
AT+BAUD
+BAUD=
Set / query -RFID
instructions:response:response
AT+RFID:OK:Param(0000-FFFF)
Default value:8899
AT+RFID:+BAUD=
Set / query -DVID
instructions:response:response
AT+DVID:OK:Param(0000-FFFF)
Default value:8899
AT+DVID:+BAUD=
Set / query -RFC
instructions:response:response
AT+RFC:OK:Param(001-128)
Default value:001
AT+RFC:+RFC=
Set / query -POWE
instructions:response:response
AT+POWE
OK:Param(0-9)
0:-25db
1:-15db
2:-5db
3:0db
4:+3db
5:+6db
6:+9db
7:+10db
8:+10db
9:+12db
Default value:9
AT+POWE
+POWE=
Set / query -CLSS
instructions:response:response
AT+CLSS
OK:Param
A0:serial port transmission (transceiver)
C0:remote control or IO button with indicator (transmitter).
C 1:remote control or IO button without indicator (transmitter).
C 2:IO normally high level, after receiving the signal, low level, delay.
High level after 30mS
C 3:IO is usually low level, after receiving the signal, the high level has been
Recovery of low level after delayed 30mS
C 4:IO is usually low level, and receives the high level of the pressed signal.
Receive raised signal low level
The IO level is reversed when the C 5:IO receives the pressed signal.
Default value:A0
AT+CLSS
+CLSS=
Package included
1 x JDY-40 2.4G Wireless Serial Port Transmission And Transceiver Integrated Remote Communication Module
Weight | 0.012 kg |
---|
Customers Also Viewed
WQ-BX-S2 Water Filter Activated Carbon Cartridge Replacement Refrigerator Filter for SAMSUNG
$52.64Switch AccessoriesAdd to cartSpecificationsMaterial:PC+Activated CarbonMin.Working pressure:207 kPa/30 psiMax.working pressure:689 kPa/100 psiMin.operating temperature:0.6°C/33°FMax.operating temperature:38°C/100°FRated service flow:0.5gpm(1.89L/min)Rated capacity:300 gallons(1136 liters)Features-Replace the filter every 6 months.-Made of coconut shell carbon fiber and PC,nice quality and filter performance.-Help to filter water,reduce residual chlorine and peculiar smell,which makes water taste better.-The refrigerator water filter have been tested and certified by NSF International against …
ESP32 OLED Module ESP32 OLED WiFi + bluetooth Dual ESP-32 ESP-32S ESP8266
$26.23Smart ModuleAdd to cartDescriptionESP32 is already integrated with antenna and RF balun, power amplifier, low noise amplifiers, filters, and the power management module.The entire solution is the least amount of PCB area. this board is 2.4 GHz dual mode WiFi and bluetooth chips by tsmc 40nm low power technology, power and optimized RF characteristics, which is safe, reliable, …
ESP32 OLED Module ESP32 OLED WiFi + bluetooth Dual ESP-32 ESP-32S ESP8266Read More
DIY Holographic Projection Building Block Virtual Imaging Blocks Toys
$19.97PhysicsAdd to cartName:DIY Holographic Projection Building Block Virtual ImagingModel:JY-WIZT00300SpecificationNet weight:189.4gPackaging size:395*285*5mmComposite finished product size:140*140*55mmColour:Log colourMaterial:WoodFeatures– Training of Practical Ability– Types of Science and Education:Physics– Intelligence trainingNote1. Because there may be slight deviation in manual measurement, please refer to the actual object.2. The picture is the finished product after installation and the shipment is the installation material package.3. …
DIY Holographic Projection Building Block Virtual Imaging Blocks ToysRead More
Laser Protective Goggles Glasses 405nm 445nm 650nm Red Blue Blue-violet Laser Eye Protection Safety
$26.31Laser Safety GlassesAdd to cartSpecificationName:Laser Protective GogglesMaterial:PlasticOptical Density (OD):OD4+Typical Laser Wavelength:650nm, 445nm, 405nmFeatures– Good protective performance, can filter 80% strong laser light.– Perfect for laser protection of 650nm red laser, 445nm blue laser, 405nm blue-violet laser.– Offer effective protection for your eyes in laser engraving operation.Package Included1 x Laser Protective Goggles1 x Storage Pouch
5Pcs Rain Sensor Water Level Measure Module Raindrop Analog Sensor Board
$12.88Sensor & Detector ModuleAdd to cartParameterWorking voltage:DC 5VWorking current:less than 35MAType:Analog SensorTest area:40 mm x 18 mmOperating temperature:10 → to 30 →Working humidity:10% – 90% No condensationFixing hole size:Φ3mmProduct size:60mm x 22mmApplicable occasions:Design of water level alarmFeatures:Simple, easy to use, small size, light, cost-effectivePackage includes5 x Rain Sensor
3pcs 36*IR LED Board for CCTV Camera Night Vision 60mm for CS LEN infrared Light Board DC12V
$12.06LED BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Description– Infrared IR LED boards for CCTV cameras night vision.– Power supply exceeds DC13V may greatly reduce the LEDs operating life.SpecificationsLED Number:36PCSBoard Diameter:60 mm (outside) / 34mm (inside)Power Supply:DC12V / 220mA (typical)Operation …
3pcs Low 3.5ohm PCA9306 Dual Bidirectional Voltage-Level Conversion Module Converter
$27.46Sensor & Detector ModuleAdd to cartDescriptionThis is a conversion board for the PCA9306 dual bidirectional voltage-level translator. Because different parts sometimes use different voltage levels to communicate, voltage level translators can be the key to making different parts play nice.The PCA9306 is a dual bidirectional I2C-bus and SMBus voltage-level translator that’s operational on the low side from 1.0 V to …
3pcs Low 3.5ohm PCA9306 Dual Bidirectional Voltage-Level Conversion Module ConverterRead More
Reviews
There are no reviews yet.