5pcs JDY-40 2.4G Wireless Serial Port Transmission And Transceiver integrated Remote Communication Module
$16.11
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
JDY-40 is developed with 2.4G technology, the sight distance is 120 meters, using serial port communication interface, using simple and fast, only need to understand the serial knowledge of the JDY-40 can be applied to the product!
Pin function description
Pin:The name of the discipline:Function
1:GPI01:Input-output IO, which can be configured by AT+CLSS
2:GPI02:Input-output IO, which can be configured by AT+CLSS
3:GPI03:Input-output IO, which can be configured by AT+CLSS
4:GPI04:Input-output IO, which can be configured by AT+CLSS
5:GPI05:Input-output IO, which can be configured by AT+CLSS
6:GPI06:Input-output IO, which can be configured by AT+CLSS
7:GPI07:Input-output IO, which can be configured by AT+CLSS
8:GPI08:Input-output IO, which can be configured by AT+CLSS
9:VCC:Power supply (2.2-3.6)
10:RXD:Serial port input pin
11:TXD:Serial port output pin
12:SET:AT command switching pin (low level AT instruction, high level transparent transmission)
13:CS:Transmission or push button mode:CS pin (low level wake-up, high level sleep).
IO receive mode:the CS pin needs to be suspended or pulled up
14:GND:Power supply
Application scene
1:2.4G panel switch
2:2.4G remote control
3:2.4G transmission
4:one to many control of mobile phone
5:IO switching control
6:2.4G toys
7:smart home control application
Technical parameter
Model:JDY-40
Working band:2.4G
Emissive power:Maximum 12dB
working temperature:-40 C – 80 C
Reception sensitivity:-97db
transmission distance:120 meters
working voltage:2.2V-3.6V
TX current:40mA
RX current:24mA
Sleep current:5uA
communication interface:Standard TTL serial port
Default configuration
sequence:function:parameter:instructions
1:baud rate:9600:AT+BAUD
2:wireless ID:8899:AT+RFID8899
3:device ID:1122:AT+DVID1122
4:channel:001:AT+RFC001
5:emissive power:12db:AT+POWE9
6:equipment type:A0:AT+CLSSA0
Communication
it is necessary to configure the RFC, DVID, and RFID that need the communication module to be the same. The module and the module can communicate. When the module comes out, the parameters are all unified, and the user can configure it according to its own needs.
AT instruction instructions
Specifically, the JDY-40 module needs to add the ending symbol rn to send the AT instruction.
Set / query – baud rate
instructions:response:response
AT+BAUD
OK:Param(1-7)
1:1200
2:2400
3:4800
4:9600
5:14400
6:19200
Default value:4
AT+BAUD
+BAUD=
Set / query -RFID
instructions:response:response
AT+RFID:OK:Param(0000-FFFF)
Default value:8899
AT+RFID:+BAUD=
Set / query -DVID
instructions:response:response
AT+DVID:OK:Param(0000-FFFF)
Default value:8899
AT+DVID:+BAUD=
Set / query -RFC
instructions:response:response
AT+RFC:OK:Param(001-128)
Default value:001
AT+RFC:+RFC=
Set / query -POWE
instructions:response:response
AT+POWE
OK:Param(0-9)
0:-25db
1:-15db
2:-5db
3:0db
4:+3db
5:+6db
6:+9db
7:+10db
8:+10db
9:+12db
Default value:9
AT+POWE
+POWE=
Set / query -CLSS
instructions:response:response
AT+CLSS
OK:Param
A0:serial port transmission (transceiver)
C0:remote control or IO button with indicator (transmitter).
C 1:remote control or IO button without indicator (transmitter).
C 2:IO normally high level, after receiving the signal, low level, delay.
High level after 30mS
C 3:IO is usually low level, after receiving the signal, the high level has been
Recovery of low level after delayed 30mS
C 4:IO is usually low level, and receives the high level of the pressed signal.
Receive raised signal low level
The IO level is reversed when the C 5:IO receives the pressed signal.
Default value:A0
AT+CLSS
+CLSS=
Package included
5 x JDY-40 2.4G Wireless Serial Port Transmission And Transceiver Integrated Remote Communication Module
Weight | 0.06 kg |
---|
Customers Also Viewed
3pcs 6mA 3-100CM Adjustable infrared Digital Obstacle Avoidance Sensor Module
$20.45Sensor & Detector ModuleAdd to cartSpecificationsWorking voltage:DC 3.8V-5.5VWorking current (5V):typical current 6mAInput and output signals (3 lines):GND, VCC is power, and VCC is 3.8V-5.5VObstacle detection time (range from obstacle-free to obstacle-free or obstacle-free to obstacle-free)Working Principle:Sensors actively emit infrared light, according to reflected light detection, if detected obstacles, OUT foot output 0, otherwise 1.Detection distance (test environment, indoor, maximum power, …
3pcs 6mA 3-100CM Adjustable infrared Digital Obstacle Avoidance Sensor ModuleRead More
60x90cm Woven Wire 304 Stainless Steel Filtration Grill Sheet Filter 4 Mesh
$74.87Mesh & Wire ClothAdd to cartDescriptionStainless Steel Woven Wire is widely used in stainless steel mesh screen filter and protectivedecorative, scope throughout the mining, petroleum, chemical, food, medicine, machinerymanufacturing, construction, decoration, electronics, aerospace and other industries.SpecificationMaterial:Stainless steelSize:60x90cmMesh:4Features– Acid and alkali resistance, good corrosion performance; high strength, tensile, toughness and wear resistance, durable;– High temperature oxidation– Normal processing, plastic processing that …
60x90cm Woven Wire 304 Stainless Steel Filtration Grill Sheet Filter 4 MeshRead More
5Pcs 2381BS 0.28 inch LED Digital Tube 3-digit Common Anode Bright Red Light
$5.18Electronic Accessories & SuppliesAdd to cartSpecificationType:0.28inch Three-digit digital tubeDimensions:22.53mm*10mm*7mm (length * width * thickness)Color:Red lightQuantity:5PcsPackage included5Pcs LED Digital Tube
3Pcs 15W TDA7297 Dual-Channel Amplifier Board
$22.42Amplifier BoardAdd to cart3Pcs 15W TDA7297 Dual-Channel Amplifier Board For Features AC / DC, 2.0 / dual channel / stereo,12V/2A when using, the output power of 15W +15 W, peak up 25W +25 W Can be accessed by two 4-8Ω 10-50W speakers A large volume of small size High signal to noise ratio Upgraded version of the radiator, …
5pcs 4S 16.8V BMS PCB 18650 Lithium Battery Charger Protection Board Balanced Current 100mA
$19.95Battery Protection ModuleAdd to cartFeatureName:Lithium battery balancing boardScope of application:3.7V Nominal voltage, 4.2V full voltage lithium battery (including 18650, 26650, polymer lithium battery)Size:20 x 30 x 2.4mmAdaptable voltage:16.8VBalanced current:100mA, suitable for 2000-4000 mah batteryNote:this product cannot be used instead of lithium battery protection board (not overcharge protection and discharge protection function)Package included5 x Lithium battery balancing board
UWB Ultra Wideband Antenna 2.4Ghz – 10.5Ghz Pulse PCB Antenna Module
$17.48Motherboard & Development BoardAdd to cartFeaturesThis is an improved UWB antenna, mainly used for ultra-wideband positioning, communication and so on.The antenna coverage frequency is 2.4GHz-10.5GHz, and the standing wave is usually less than 2.5.The antenna is characterized by small size and high efficiency.Ultra-wideband UWB antenna, high transmission rate.UWB pulse forming technology, a worthwhile antenna for you.SpecificationMaterial:PCBColor:as picture shownWorking frequency:2.4GHz-10.5GHzPolarization mode:vertical …
UWB Ultra Wideband Antenna 2.4Ghz – 10.5Ghz Pulse PCB Antenna ModuleRead More
Reviews
There are no reviews yet.