3pcs JDY-40 2.4G Wireless Serial Port Transmission And Transceiver integrated Remote Communication Module
$10.29
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
JDY-40 is developed with 2.4G technology, the sight distance is 120 meters, using serial port communication interface, using simple and fast, only need to understand the serial knowledge of the JDY-40 can be applied to the product!
Pin function description
Pin:The name of the discipline:Function
1:GPI01:Input-output IO, which can be configured by AT+CLSS
2:GPI02:Input-output IO, which can be configured by AT+CLSS
3:GPI03:Input-output IO, which can be configured by AT+CLSS
4:GPI04:Input-output IO, which can be configured by AT+CLSS
5:GPI05:Input-output IO, which can be configured by AT+CLSS
6:GPI06:Input-output IO, which can be configured by AT+CLSS
7:GPI07:Input-output IO, which can be configured by AT+CLSS
8:GPI08:Input-output IO, which can be configured by AT+CLSS
9:VCC:Power supply (2.2-3.6)
10:RXD:Serial port input pin
11:TXD:Serial port output pin
12:SET:AT command switching pin (low level AT instruction, high level transparent transmission)
13:CS:Transmission or push button mode:CS pin (low level wake-up, high level sleep).
IO receive mode:the CS pin needs to be suspended or pulled up
14:GND:Power supply
Application scene
1:2.4G panel switch
2:2.4G remote control
3:2.4G transmission
4:one to many control of mobile phone
5:IO switching control
6:2.4G toys
7:smart home control application
Technical parameter
Model:JDY-40
Working band:2.4G
Emissive power:Maximum 12dB
working temperature:-40 C – 80 C
Reception sensitivity:-97db
transmission distance:120 meters
working voltage:2.2V-3.6V
TX current:40mA
RX current:24mA
Sleep current:5uA
communication interface:Standard TTL serial port
Default configuration
sequence:function:parameter:instructions
1:baud rate:9600:AT+BAUD
2:wireless ID:8899:AT+RFID8899
3:device ID:1122:AT+DVID1122
4:channel:001:AT+RFC001
5:emissive power:12db:AT+POWE9
6:equipment type:A0:AT+CLSSA0
Communication
it is necessary to configure the RFC, DVID, and RFID that need the communication module to be the same. The module and the module can communicate. When the module comes out, the parameters are all unified, and the user can configure it according to its own needs.
AT instruction instructions
Specifically, the JDY-40 module needs to add the ending symbol rn to send the AT instruction.
Set / query – baud rate
instructions:response:response
AT+BAUD
OK:Param(1-7)
1:1200
2:2400
3:4800
4:9600
5:14400
6:19200
Default value:4
AT+BAUD
+BAUD=
Set / query -RFID
instructions:response:response
AT+RFID:OK:Param(0000-FFFF)
Default value:8899
AT+RFID:+BAUD=
Set / query -DVID
instructions:response:response
AT+DVID:OK:Param(0000-FFFF)
Default value:8899
AT+DVID:+BAUD=
Set / query -RFC
instructions:response:response
AT+RFC:OK:Param(001-128)
Default value:001
AT+RFC:+RFC=
Set / query -POWE
instructions:response:response
AT+POWE
OK:Param(0-9)
0:-25db
1:-15db
2:-5db
3:0db
4:+3db
5:+6db
6:+9db
7:+10db
8:+10db
9:+12db
Default value:9
AT+POWE
+POWE=
Set / query -CLSS
instructions:response:response
AT+CLSS
OK:Param
A0:serial port transmission (transceiver)
C0:remote control or IO button with indicator (transmitter).
C 1:remote control or IO button without indicator (transmitter).
C 2:IO normally high level, after receiving the signal, low level, delay.
High level after 30mS
C 3:IO is usually low level, after receiving the signal, the high level has been
Recovery of low level after delayed 30mS
C 4:IO is usually low level, and receives the high level of the pressed signal.
Receive raised signal low level
The IO level is reversed when the C 5:IO receives the pressed signal.
Default value:A0
AT+CLSS
+CLSS=
Package included
3 x JDY-40 2.4G Wireless Serial Port Transmission And Transceiver Integrated Remote Communication Module
Weight | 0.036 kg |
---|
Customers Also Viewed
100 Pcs Copper Cable Lugs Kit SC6-6 ~SC35-10 Electrical Terminal Block Wire Connectors
$70.86ConnectorsAdd to cartSpecificationModel:SC6-6~SC35-10Material:Tin Plated CopperColor:SilverSize:6mm²/10mm²/16mm²/25mm²/35mm²Mount Hole:6 mm/8 mm/10 mmBox Size(L*W*H):280 x 126 x 14 mmQuantity:100 PcsFeaturesElectro-plated tin exterior.Premium quality copper material, environmentally friendly, safe for using.These tube lugs have a bell shaped end allowing for easy insertion of the cable.Acceptable working temperature is -55℃ to 100℃ and are suitable for applications in the Australian Climate.Copper lugs are …
100 Pcs Copper Cable Lugs Kit SC6-6 ~SC35-10 Electrical Terminal Block Wire ConnectorsRead More
TDA7377 Subwoofer Amplifier Audio Board 38Wx3 Mini Home Amp 2.1 Channel HiFi Stereo Power Amplifier DIY
$21.86Amplifier BoardAdd to cartDescriptionThe power amplifier board uses 7377 amplifier chip, dual circuit design, optional DC12V / AC12V power supply, and uses 2.1 three-channel output. Available for Bluetooth / Wireless Microphone / Fan. Separate design, easy installation, provides volume and subwoofer adjustment. ParametersWorking voltage:DC12V / AC12V Chip:TDA7377 Op amp:LT084 / 324 Working voltage:DC12V / AC12V Output power:38Wx3 Channel …
XH-W1411 220V 10A Smart Electronics LED Digital thermometer Temperature Controller Switch Module
$17.48Test & Measuring ModuleAdd to cartSpecificationsTemperature range:-55- + 120→Temperature measurement accuracy:± 0.3→Resolution:0.1→Temperature range:-19 ~ 99→Control accuracy:1→Temperature probe:NTC10K / B3950 comes standard with 1 meter waterproof probeSupply voltage:220VTemperature:-25 ~ 55→ Humidity 20% -85% (non-condensing)Output Type:10A relay outputsSize:90*60mm/3.54 Inch*2.36 InchHole size:70*50mm/2.76 Inch*1.96 InchFeatures– The board and plastic panels fixed column compartment and lock nut– Connect the power supply according to the drawings …
3Pcs HIFI Amplifier Passive Tone Board Bass Treble Volume Control Preamp Board DIY Kit
$24.99DIY Electronic KitsAdd to cartDescriptionIt is DIY Kit, must be assemble to work. User need technical operation ability.Package included3 x HIFI Amplifier Passive Tone Board Bass Treble Volume Control Preamp Board DIY Kit
100x100cm High Strength Carbon Fiber Cloth for interlayer 3900 mpa
$60.74Carbon FiberAdd to cartSpecificationSize;100 x 100cmWidth; 0.25mmMaterial:Carbon fiberCompressive strength:3900 mpaFeaturesa.Uniform texture, without color. Weaving skills, good gloss.b.Mainly used in aircraft main, tail and body; automotive engine synchronizer, hood, bumpers, decorative pieces; bike frame, wheels, leading; racket, cone; kayaking, snowboarding; various models, helmets , watches, pens, bags.Main purpose1. Aerospace:fuselage, rudder, rocket engine shells, missiles casual flow, such as solar …
100x100cm High Strength Carbon Fiber Cloth for interlayer 3900 mpaRead More
3pcs EQKIT 60 Seconds Electronic Timer Kit DIY Parts Soldering Practice Board
$28.54DIY Electronic KitsAdd to cartInstruction:http://img.staticbg.com/file/products/20180726215941ETI-60-timer-kit.pdfFeatureOperating voltage:DC5VStandby current:≤8mAWorking current:≤10mACountdown:60 secondsCountdown ends prompt:three alarmsSoludering difficulty:GeneralBoard size:84 x 84mmNote:Electronic production kit, require buyer soldering assembly.Package included3 x Electronic Timer K
Reviews
There are no reviews yet.