1 Channel 5V Relay Module with Optocoupler Isolation Relay Board
$6.55
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Description
1. The module meets the safety standards, and there are isolation grooves between the control area and the load area.
2. Module with optocoupler isolation can trigger more reliably and stably.
3. Adopt double-sided FR-4 circuit board design and high-end patch technology.
4. Use genuine relay control;
5. It has power supply and relay action instructions. It can absorb and close brightly and disconnect lightly.
6. When there is a high level signal at the input end of the signal, the common end and the normal beginning will be connected.
7. Relays can directly control all kinds of equipment and loads.
8. There is a normally open and a normally closed contact.
9. Blue KF301 terminal connection control line is more convenient.
10. Module size:53x18x18.5mm; Net weight:16g
Module Interface
VCC:Connect the positive pole of the power supply (supply by relay voltage)
GND:Connect power supply negative pole
IN:Relay Module Signal Trigger (High Level Trigger is Effective)
Meaning of high level and low level
High-level trigger refers to a trigger mode connected with the trigger terminal by the positive voltage of the VCC terminal. When the trigger terminal has a positive voltage or reaches the trigger voltage, the relay sucks.
Low-level trigger refers to a trigger mode connected with the trigger terminal by the negative voltage of the GND terminal. When the trigger terminal has a voltage of 0V or a voltage low enough to trigger, the relay sucks.
Relay contact capacity:250V 10A (AC) or 30V 10A (DC) (theoretical maximum load capacity)
It is recommended that the AC power be less than 1500W and the DC power be less than 200W.
Package Included
1 x 1 Channel 5V Relay Module
Weight | 0.016 kg |
---|
Customers Also Viewed
USR-ES1 W5500 Chip SPI to LAN Ethernet Converter TCP/IP Module WIZ820io
$15.30Converter BoardAdd to cart>>>Manual:Click here to openOverviewUSR-ES1 embeds Wiznet’s W5500 chip, which uses hardware logic gates to implement the transport layer and network layer of the TCP/IP protocol stack (such as TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE, etc.), and integrates The data link layer, physical layer, and 32K bytes of on-chip RAM serve as data transceiving buffers. …
USR-ES1 W5500 Chip SPI to LAN Ethernet Converter TCP/IP Module WIZ820ioRead More
3pcs TEC1-12715 12V Heat Sink thermoelectric Cooler Peltier Plate Module
$32.04Electronic Accessories & SuppliesAdd to cart40 x 40mm TEC1-12715 12V Heatsink Thermoelectric Cooler Peltier Plate ModuleDescriptionSolid state, vibration free, noise-freeSimple to install and operateThe hot surface need to be good heat sinkSpecificationProduct name:thermoelectric cooler plate moduleModel:TEC1-12715Color:whiteCouples:127Voltage:12VUmax:15.4VImax:15AMax power consumption:231WTmax:70°CQcmax T=0(W):137WSize:40 x 40 x 3.3mmWeight:50gPackage included3 x TEC1-12715 cooler plate module
EQKIT KM-1 DC 6-12V PWM Motor Speed Controller Kit DIY Motor Speed Regulator Set Stepless Speed Control
$8.73Module KitsAdd to cartSpecificationsModel:KM-1Operating voltage:DC 6-12VPCB board size:40 x 40mmCircuit descriptionKM-1 uses PWM (pulse width modulation) to control the speed of the motor, adjust the pulse width duty ratio, so that the speed from zero to the maximum speed stepless speed regulation. The wider the crest width of the control waveform, the faster the motor speed; on the …
20pcs 63V 10000UF 105 High Frequency Temp Electrolytic Capacitor 30mm x 50mm Long Life
$108.62Electronic Accessories & SuppliesAdd to cartSpecificationModel:485622Voltage:63VCapacitance:10000UFTemperature:105→Diameter:30mm / 1.1 inchHeight:50 mm / 2 inchFeaturesLong life, high temperatureHigh-frequency capacitorsPackage included20 x Electrolytic Capacitor
Reviews
There are no reviews yet.