US-100 Ultrasonic Ranging Module with Temperature Compensated Sensor Dual Mode Serial Port
$10.92
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Characteristic
The US-100 ultrasonic ranging module can provide 2cm-450cm non-contact distance sensing function, wide working voltage, self-contained temperature sensor to correct the ranging result, and also has GPIO, serial port and other communication methods. The dog is stable and reliable.
The module includes a transmitter, receiver and control circuit, which is a piezoelectric sensor that is fabricated using electrostrictive phenomena.
An alternating voltage is applied to the piezoelectric material slice (such as quartz crystal, piezoelectric ceramic, lead bismuth titanate, etc.) to cause it to generate electrostrictive vibration to generate ultrasonic waves. The resonance is generated when the frequency of the applied alternating voltage is equal to the natural frequency of the wafer, and the ultrasonic wave generated at this time is the strongest.
Piezoelectric ultrasonic receivers generally operate using the inverse effect of an ultrasonic generator. The structure is basically the same as that of an ultrasonic generator, and sometimes the same transducer is used as both a generator and a receiver.
When the ultrasonic wave acts on the piezoelectric wafer, the wafer is stretched and contracted, and alternating charges are generated at the two interfaces of the wafer, and then converted into a voltage and amplified to be sent to the measuring circuit, and finally recorded or displayed.
Electrical parameters:US-100 ultrasonic ranging module
Operating Voltage:DC 2.4V~5.5V
Quiescent Current:2mA
Operating temperature:-20~+70 degrees
output method:Level or UART (jumper cap selection)
Induction angle:Less than 15 degrees
Detection distance:2cm-450cm
Detection accuracy:0.3cm+1%
Serial port configuration in UART mode:The baud rate is 9600, the start bit is 1 bit, the stop bit is 1 bit, the data bit is 8 bits, there is no parity, no flow control.
Pin 1:Connect to VCC power supply (DC 2.4V-5.5V).
Pin 2:When it is in UART mode, it is connected to the TX terminal of the external circuit UART; when it is in the level trigger mode, it is connected to the Trig terminal of the external circuit.
Pin 3:When in UART mode, connect to RX terminal of external circuit UART; when it is level trigger mode, connect to Echo terminal of external circuit.
Pin 4/5:Connect the ground of the external circuit, and the two pins are turned on.
Level-triggered ranging works
Before powering up the module, first remove the jumper cap on the mode selection jumper to put the module in level trigger mode.
It can be seen from the figure that only a high level of 10US or more is required to be input to the Trig/TX pin, and the system can send eight 40KHZ ultrasonic pulses and then detect the echo signal. When the echo signal is detected, the module also measures the temperature value, then corrects the ranging result according to the current temperature, and outputs the corrected result through the Echo/RX pin. In this mode, the module converts the distance value to twice the time value at 340m/s, outputs a high level through the Echo terminal, and simultaneously starts the timer, and can read the timer when the port goes low. The value of the high level is the time from the transmission to the return of the ultrasonic wave. The distance value can be calculated based on the duration of this high level. That is, the distance value is:(high time *340m/s)/2.
Note:Since the distance value has been temperature corrected, it is no longer necessary to correct the ultrasonic sound speed according to the ambient temperature, that is, the sound speed is 340m/s regardless of the temperature.
Serial port triggering ranging works
Before the module is powered on, first plug in the jumper cap on the mode selection jumper to make the module in serial port trigger mode.
In this mode, only need to input 0X55 (baud rate 9600) on the Trig/TX pin, the system can send 8 40KHZ ultrasonic pulses and then detect the echo signal. When the echo signal is detected, the module also measures the temperature value, then corrects the ranging result according to the current temperature, and outputs the corrected result through the Echo/RX pin. The output distance value is a total of two bytes, the first byte is the upper 8 bits of the distance (HDate), and the second byte is the lower 8 bits of the distance (LData), in millimeters. That is, the distance value is (HData*256 + LData) mm.
Serial port trigger temperature measurement working principle
Before the module is powered on, first plug in the jumper cap on the mode selection jumper to make the module in serial port trigger mode.
In this mode, only need to input 0X50 (baud rate 9600) on the Trig/TX pin, the system will start the temperature sensor to measure the current temperature, and then output the temperature value through the Echo/RX pin. After measuring the completion temperature, the module will return a byte temperature value (TData), the actual temperature value is TData-45. For example, after sending 0X50 through TX and receiving 0X45 on RX, the temperature value at this time is [69 (0X45 decimal value) -45] = 24 degrees.
Precautions
1. This module should not be connected with power. If you want to have a live connection, first connect the GND terminal of the module first, otherwise it will affect the normal operation of the module.
2. When measuring distance, the area of the measured object is not less than 0.5 square meters and the plane should be flat as much as possible, otherwise the measurement result will be affected.
3. If the test surface is not very regular or when testing a distant object, multiple measurements can be used to correct it.
Package includes
1 x US-100 Ultrasonic Ranging Module
Weight | 0.009 kg |
---|
Customers Also Viewed
3Pcs RobotDyn RTC DS1307 Real Time Clock Battery Shield with Pin Headers Set
$18.67Expansion Board & ShieldAdd to cartPINOUT:http://img.staticbg.com/file/products/20171226001032PINOUT-RTCDS1307.pdfSchematic:http://img.staticbg.com/file/products/20171226001140Schematic-RTCDS1307.pdfFeatureType:Logic ICsPackage includes3 x RTC DS1307 (real time clock) + battery3 x Wemos D1 mini shield6 x Male Pin Header 8pins6 x Female Pin Header -BLACK 8pins6 x Stackable Header – BLACK 8pins
110V Electric Pet Heating Mat Winter Heated Blanket 2 Speeds Waterproof Cat Dog Heater Pads Bed Bite Resistant
$40.49Laboratory Heating EquipmentsAdd to cartSpecificationsType:CushionRated voltage:110V 50HzRated power:20WPlug:US Plug(We will provide adapter according to delivery country)Material:Polyester + cottonSize:45cmx45cm/17.7inchx17.7inchFeature-Soft cotton texture and vivid prints attract pets’ attention.-Two-speed temperature adjustment (high temperature 50 °C,low temperature 30 °C),can be adjust the temperature level.-The heating rate is fast, warm and comfortable,overheat protection.-Scratch and bite resistant,not easily damaged,thick and durable.-Keep warmer in winter,safe and …
Geekcreit UNO+WiFi R3 ATmega328P+ESP8266 32Mb Memory USB-TTL CH340G Module
$19.67Motherboard & Development BoardAdd to cartDescriptionFull integration on one board:Uno R3 ATmega 328 and WiFi ESP8266 with memory 32Mb (MegaByte). All of the modules can work together or each separately. And everyone has their own pinout headers.The convenient solution for the development of new projects requiring Uno and WiFi.Via USB you can update sketches and firmvare for ATmega328 and for …
Geekcreit UNO+WiFi R3 ATmega328P+ESP8266 32Mb Memory USB-TTL CH340G ModuleRead More
3pcs CA-255 10-42inch LED TV Constant Current Board Universal inverte LED TV Backlight Driver Board
$16.47Driver ModuleAdd to cartSpecificationInput Vol:10.8-28VOutput Vol:15-88vsize:8.5×4.5CM1.VCC:power supply and voltage positive, circuit voltage (The voltage is usually 12V or 24V)2.ON / OFF, ON, EN, ON_BL etc:switch foot, foot switch signal (The voltage range is between 2.5V-5V)3. PWM, PDIM, VDAJ, BL-PWM et al:brightness adjustable feet (Dimming have two modes, one is in digital mode -PWM, one is analog dimming -DC4.The …
30pcs A4988 Driver Module Stepper Motor Driver Board with Heatsink
$54.70Motor PWM Speed ControllerAdd to cartFeature1. It is suitable for driving stepper motors of 8V~35V 2A or less2. Only simple step and direction control interface3. Five different stepping modes:full, half, 1/4, 1/8 and 1/164. The adjustable potentiometer can adjust the maximum current output to obtain a higher step rate5. Automatic current decay mode detection/selection6. Overheat shutdown circuit, under-voltage lockout, cross-current …
30pcs A4988 Driver Module Stepper Motor Driver Board with HeatsinkRead More
10pcs 801S Vibration Shock Sensor Control Module Sensitivity Adjustable Board
$79.70Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Features1. having a signal output instruction;2. with a TTL level signal, and the analog output signal;3. the output valid signal is high, the light goes out;4. the sensitivity is adjustable (fine-tuning);5. wide …
10pcs 801S Vibration Shock Sensor Control Module Sensitivity Adjustable BoardRead More
5pcs W3231 incubator Temperature Controller thermometer Cool/Heat Digital Dual Display with NTC Sensor DC12V
$41.22Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionTemperature Control:-55C~120C/-67F~ 248FTemperature Control Accuracy:0.1 C / 0.1 FDisplay Color:Red + BlueWorking Power Supply:DC12VTemperature Sensor:1M NTC 10K Product Size:79.2mm≠41.9mm≠26.3mmHole Size:72.1mm≠39.2mmOperation and Display PanelWarning codeCodeReason for errorSolutionHHHTemperature exceeds alarm temperatureThe temperature drops below …
CO2 System Pro Tube Air Valve Guage Bottle Cap Kit for DIY Aquarium Planted Tank
$68.84ConnectorsAdd to cartTechnical SpecificationsColor:WhiteMaterial:ABS and MetalTube Inner Size:4mmFeatures and Benefits Easy to set up CO2 system is designed for low cost planted tank use. 2 air-pipe locks on the bottle cap, prevent the air-pipe get loose ABS bottle caps, good pressure resistance, NO deformation Specialized pressure gauge, build-in automatic safe valve,Keeps pressure in the safe level, never …
CO2 System Pro Tube Air Valve Guage Bottle Cap Kit for DIY Aquarium Planted TankRead More
Reviews
There are no reviews yet.