10-6000MHz RF DC Biaser Bias Spot with Shell SMA-K Connector
$41.01
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Working parameters
1. Frequency range:10-6000MHz
2. Insertion loss:0.3dB@512MHz 0.45dB@1575MHz
3. Maximum voltage:50V
4. Maximum current:500mA
5. Radio frequency connector:SMA-K (outer screw inner hole)
6. System impedance:50 ohm
7. Dimensions:33mmx33mm without connectors
8. Product weight:22g
Usage
1. RF power supply for active antenna
2. The output of the broadband amplifier is blocked
3. Communication data is injected through the RF end
Wiring
1. DC:External DC power supply
2.RF:RF signal terminal (this port can only transmit RF signals)
3.RF+DC:RF DC bias (this port can transmit RF and DC bias)
4. GND-:common ground terminal for DC power supply
5. VCC+:the power supply terminal of DC power supply
Package included
1 x RF DC Biaser Bias Spot with Shell
Weight | 0.022 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.