5pcs M38 Bluetooth 4.2 Audio Receiver Module 5W+5W Lossless Car Speaker Headphone Amplifier Board Wireless Refit
$27.00
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
For different needs of customers, we offer 3 versions for you to choose from
Function / Model:M18 (Product ID:1476791):M28 (Product ID:1486747):M38 (this item)
Micro power supply:*:√:√
Audio headphone jack:*:√:*
Built-in amplifier:*:*:√(5W+5W)
Lithium battery powered:√:√:√
Support USB sound card, free drive:*:*:√
Volume memory/adjustment:√:*:*
MUTE mute interface:√:*:*
Button extension:√:*:*
Bluetooth version:bluetooch V4.2
Support Bluetooth protocol:HFPV1.7, A2DPV1.2, AVRCPV1.5, AVCTPV1.2, AVDTPV1.2
Format support:Support WAV/WMA/FLAC/APE/MP3 lossless decoding, stereo two-channel output
Operating Voltage:5V/3.7V-4.2V
Broadcast status not connected:5.5MA
Connection working status:20MA
Deep sleeping:3UA
Transmission distance:20 meters (empty or low interference environment)
Operating temperature:-40°C to +85°C
Sensitivity:-87dbm
Introduction
This product MH-M38 is a low-power bluetooth design solution, supporting the latest Bluetooth 4.2 transmission, two-channel stereo lossless playback, Bluetooth connection after the module is connected to Bluetooth, very convenient. In an open environment, the Bluetooth connection distance can be up to 20 meters.
Widely used in a variety of Bluetooth audio reception, a variety of audio DIY modification.
Pin number:Pin header:Description
1:5V:Power positive 5V
2:GND:Negative power supply
3:VBAT:Lithium battery positive 3.7-4.2V
4:L+/L-:Left channel output (direct speaker)
5:R+/R-:Right channel output (direct speaker)
Function Description
Bluetooth V4.2 version, supports Bluetooth automatic connection technology, supports WAV/WMA/FLAC/APE/MP3 lossless decoding, stereo dual channel output.
After the module is powered on, the mobile phone searches for the Bluetooth name MH-M18/MH-M28/MH-M38, and can play music after connecting Bluetooth.
Note
1. Power supply:You can directly use the MICRO USB Android cable 5V for direct power supply, or you can also connect 5V power supply or 3.7V lithium battery (as shown in the figure below). Note that the 5V and 3.7V power supply interfaces are different. 5V is connected to 5V and GND, and the 3.7V lithium battery is connected to VBAT and GND.
The maximum operating current is 5V2A. It is recommended to use a regulated power supply of 5V2A for better sound quality.
2. Support USB sound card, free drive (plug and play). Connect the module to the computer with the USB cable, and the computer can play music through the module amplifier output.
3. Audio output:output left and right channel stereo audio signals, can be connected to two 2-8 euro, 3-5W speakers, push 4 O 5W speakers.
4. This product has its own dual 5W power amplifier circuit, and must not be connected to another amplifier! The outputs of the two amplifiers cannot be connected in parallel or the negative poles are connected together, otherwise the power amplifier chip is damaged.
Package includes
5 x M38 Module
Weight | 0.03 kg |
---|
Customers Also Viewed
TT-K-36-SLE Temperature Measuring Line with Plug thermocouple Sensor Line K Type Tetrafluoride
$16.19SwitchesAdd to cartThis type K thermocouple temperature line can be used for any type K imported or domestic temperature recording instrumentSpecificationName:Temperature measurement lineModel:TT-K-36-SLEDivision number:KTemperature range:-200℃~ +260℃Surface temperature tolerance range:-200℃~ +260℃K type, temperature:-200℃~260℃Insulation material:PTFECore diameter:2×0.127mmCore material:Ni-cr/ni-si alloyLead line length:500mmColor coding:Red–negative pole/ Yellow–positive poleAdapt to the thermometer modelT-DK-40T-DK-60T-DK-80T-DK-120MALCOM RCP-100RCP-300RCP-600KIC STARTKIC 2000KIC EXPLORERPackage Included1 x TT-K-36-SLE Temperature measurement line with …
Firmware PortaPack with HackRF one 1MHz-6GHz SDR Receiver Transfer AM FM SSB ADS-B SSTV Ham Radio offline GPS Simulator
$404.99Test & Measuring ModuleAdd to cartNoteExclusively write GPS simulator firmware for testing TCXO clocks (older versions of hardware are not supportedWe customize portapack source, put gpssim baseband signal file in micro sd, through portapack send to air the result is very satisfying! usage./gps-sdr-sim -e brdc3540.14n -s 2500000 -b 8 -o gpssim.c8 create text file named ‘gpssim.txt’ contextsample_rate=2500000center_frequency=1575420000 and copy this …
3Pcs Mini Ultra-small Size ESP-M3 From ESP8285 Serial Wireless WiFi Transmission Module
$19.31Smart ModuleAdd to cartOverview What is ESP8285 ESP8285=ESP8266+1M Flash, the bearing high temperature is 125→ (the one for ESP8266 is just 85→). More important, the code programmed in ESP8266 can be used for ESP8285 intactly. ESP-M3 is encapsulated by the high performance chip ESP8285, which is equal to ESP8266 chip plus 1M Flash. The chip ESP825 is encapsulated …
3Pcs Mini Ultra-small Size ESP-M3 From ESP8285 Serial Wireless WiFi Transmission ModuleRead More
XH-M312 TPA3118D2 Digital Amplifier Board DC 24V HD Edition Dual Channel 2x45W Audio Power Amp Module
$11.33Amplifier BoardAdd to cartSpecificationChip type:TPA3118D2Input voltage:Recommended DC 24V (range 12-28V)Power supply interface:DC socket (5.5*2.1)Input current:3AOutput power:45W*2Output impedance:4-8 ohmsInput impedance:1K┯Signal to noise ratio:100dBMagnification:30TSPNumber of channels:Two channelsAudio input:3.5mm socket/XH2.54- 3 terminal blockProduct size:80x50x15mm/3.15×1.97×0.59inWeight:40gPackage included1 x Amplifier Board
Reviews
There are no reviews yet.