30pcs MC106B Catalytic Combustion Gas Sensor Module for Flammable Gas Leak Alarm Detector Gas Concentration Meter
$177.80
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
>>> Manual:Click here to open
Principle Introduction
The MC106B catalytic combustion gas sensor works according to the principle of catalytic combustion effect. The detection element and the compensation element are paired to form an arm of the bridge. When the flammable gas is encountered, the resistance of the detection element increases and the output voltage of the bridge changes. The gas concentration increases to a proportional increase, and the compensation element functions as a reference and temperature and humidity compensation.
Features
The output voltage of the bridge is linear, the response speed is fast, it has good repeatability and selectivity, the component works stably and reliably, and it has good resistance to hydrogen sulfide and silicone interference.
Applications
It can be used to detect the concentration of flammable gases such as natural gas, liquefied gas, coal gas and alkanes in industrial sites. It can also be applied to flammable gas leak alarms, flammable gas detectors, and gas concentration meters.
Specifications
Product model:MC106B
Product type:Catalytic combustion gas sensor
Working voltage (V):2.5 ÷ 0.1
Working current (mA):150 ÷ 10
Sensitivity (mV):1% methane 15 ∥ 45; 1% propane 25 ∥ 65
Linearity:5%
Measuring range (% LEL):0 ~ 100
Response time (90%):10s
Recovery time (90%):30s
Operating environment:-40 ∥ + 70 →, lower than 95% RH
Storage environment:-20 ∥ + 70 →, lower than 95% RH
Package Included
30 x MC106B Catalytic Combustion Gas Sensor Module
Weight | 0.09 kg |
---|
Customers Also Viewed
5Pcs A87 4 Channel Optocoupler Isolation Module High And Low Level Expansion Board
$17.08Other Module BoardAdd to cartDescription 1. Function:Use the low level to control the high level. Such as the use of single-chip 3V or 5V voltage control 9V or 12v voltage. 2. HVCC should not exceed 24V. Output OUT1 / OUT2 / OUT3 / OUT4 output current equal to HVCC / 5.1K, absorption current 500ma. 3. This module uses TLP281 …
5Pcs A87 4 Channel Optocoupler Isolation Module High And Low Level Expansion BoardRead More
3pcs DC 3.3V To 20V 5.8GHz Microwave Radar Sensor intelligent Trigger Sensor Switch Module
$16.24Sensor & Detector ModuleAdd to cartDescriptionIt uses Doppler radar technology, with auto-sensing capabilities to control other product,High sensitivity, sensor distance, reliability, wide angle sensor,Wide supply voltage range and other characteristics. Widely used in lighting situations,anti-theft alarm situations.Features1. microwave sensors using planar antenna and receiving echo.2. The switch is active sensors.3. The sensors emit a high-frequency electromagnetic waves and receives their …
3pcs DC 3.3V To 20V 5.8GHz Microwave Radar Sensor intelligent Trigger Sensor Switch ModuleRead More
24V Air Parking Heater Flame Sensor Igniters Flame Detecter 82306B for Webasto Air top 2000
$70.86Solar CollectorsAdd to cartSpecificationsBrand Name:AutoleaderMaterial:Silicon NitrideOEM:82306BItem weight:11gFeaturesThis product is mainly made of silicon nitride ceramic substrate, with tungsten filament as the heat source, tungsten wire embedded in silicon nitride matrix, via hot-press sintering process to form an organic whole, then through grinding, welding wire, thus made the ignition components.Fitmentfor Webasto Air Top 2000Package Included1x Parking Heater Senser
L293D WiFi Smart Robot Car Motor Driver Expansion Board Dual High Power H Bridge Based on ESP12E
$9.79Expansion Board & ShieldAdd to cartL293D WiFi Smart Robot Car Motor Driver Expansion Board Dual High Power H Bridge Based On ESP12E For Specifications 1. Motor power (VM):4.5 ~ 36V 2. Control power (VIN):4.5V ~ 9V(10V MAX) 3. Provide the shortcut connector (short by VM and VIM), thus can use 4. May use common power source (4.5V~9V) by shorting VM …
220V 1000W Hot Plate Electric Iron Burner Heating Stove Heater Household Laboratory Heating Equipments
$52.64Laboratory Heating EquipmentsAdd to cartSpecificationsType:Electric Stove BurnerPlug Type:EUColor:WhiteVoltage:220VPower:1000WRegulating temperature:5 LevelsMaterial:Stainless Steel + IronSize:14*14*5CM (5.5*5.5*2in)Features– Adopted iron shell, thicken panel, material sturdy and durable to use– Portable single burner with 500 watts of power– Powered by electric, do not need fuel, eco-friendly– Easy-to-use temperature-setting knob for low, medium, or high heat– Provides quick and sustained heat; power indicator light– Single …
Reviews
There are no reviews yet.