1:200 High Simulation Missile Destroyer Battleship Model DIY Education Building Toys
$58.71
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Painting Style:Color.
Scale:1:200 (approx 82cm)
Size:A4 Standard Version (ratio 1:200, when you make good, about 82 cm long).
Difficulty:Level 5 (6 is the most advanced and the most difficult).
Feature:High simulation
Color:As picture
Material:Paper
Size:about 82 cm/32inch (when you make it).
Net weight:no cardboard, about 0.36KG, containing cardboard, about 0.59KG
Features
– It was not finished product, it need you to cut, paste and assemble.
– The cutter and glue are not included.
– Non paper components, such as ropes, are not included in this set.
– It’s about 82 cm/32inch (when you make it).
Guide To Build
Basic steps to make Paper Models.
1. Cut out each part roughly.
2. Use a pencil to mark note softly behind each part to avoid disorder (Don’t use a pen as it probably makes damaged trace on the front side).
3. Use Scissor or Craft K`nife to cut parts precisely by following the outer edge. The level of precision affects the effect of combination. (Cut the most outer edge if the line is thick).
4. Smear white adhesive cement on one of the 2 parts which needed to be stuck together.
5. Stick them together until the cement bone-dry.
Suggested Tips
A. For Scissor cutting, suggest not to push the Scissor but pull the paper.
B. To make the fold of parts better, please put the part firmly on the table, and put the ruler on that to fold the line. If you have to fold inside, you could first fold it softly outside to make the trace, and fold it back to inside then.
C. To make the curved parts better, place the part on the corner of table then push and pull it back and forth.
D. To make parts like cylinder, use tools such as pen to assist to make the curl more natural.
Note
1.The paper model requires you to cut, paste and assemble your own models, more parts,there are schematic drawings, difficult, suitable for senior enthusiasts to produce.
2.Please allow 0.5-1 inch difference due to manual measurement. (1inch=2.54cm)
3.The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding.
Package Included
1 Set x 1:200 Battleship DIY Model
Weight | 0.365 kg |
---|
Customers Also Viewed
CC2530F256RHAR cc2530 Module Serial Port Transparent Transmission with ZB502 Development Board Kit
$52.47Module KitsAdd to cartNoteAt least two CC2530 modules are needed to realize Z1gBee networking, this product contains only one.Two methods can be usedApplication method:(The bottom layer is implemented by the board, you only do the application)Use the firmware associated with the board. In this way, the board is a Z1gBee wireless serial port module, the operation is as …
H2519-5 Dual Row Plastic Terminal 600V 36A 6 Positions Screw Terminal Block Cable Connector Barrier Terminal Strip Block
$12.14ConnectorsAdd to cartSpecificationModel:H2519-5Type:Terminal block Working frequency:High frequencyInterface type:AC/DCRated current:36ARated voltage:600VConductor cross section:0.5-6mm2Number of pin:6Number of bits:6Contact material:CopperInsulation material:Insulation plasticSize:55.6mm x 21mm x21mmFeature:1) High precision2) Excellent inoxidability3) High corrosion resistance4) Great ingredient accuracy and high intensity5) Widely used in lamp, decorated lighting, factory, household appliances, distribution boxes and other transmission equipment, specially point at wire, cable access and …
2 Lamp Backlight Universal LCD CCFL 10V-28V inverter
$8.73Other Module BoardAdd to cart2 Lamp Backlight Universal LCD CCFL 10V-28V Inverter For 10 Inch To 22 Inch ScreenFeatureVoltage:10V ~ 28VCable:300mm(L) / 6 pinSize:122 x 27mm ( L x W )Interface:double light small interfaceInterface definition:1. VCC 2. GND 3. NULL 4. NULL 5. ON/OFFPackage included1 x 2 lamp backlight universal laptop LCD CCFL inverter 10V-28V1 x Cable
Wanptek NPS306W 110V/220V 0-30V 0-6A Adjustable Digital DC Power Supply 180W Regulated Laboratory Switching Power Supply
$170.09Electrical DC Power SupplyAdd to cartProduct descriptionThe Wanptek NPS-W series is a three-window display mini DC power supply that simultaneously displays voltage, current, and power.This product improves the shortcomings of traditional linear power supplies that are bulky, heavy, and inefficient.The output voltage and current of the product can be controlled and adjusted by coarse adjustment and fine adjustment potentiometer respectively, …
5pcs CJMCU-5102 PCM5102A Stereo Digital To Analog Converter DAC PLL Voice Module
$50.58Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionBrand:CJMCUPCM5102A Stereo DAC Digital To Analog Converter PLL Voice ModuleMore infos:!Package included5 x CJMCU-5102 Stereo DAC Digital To Analog Converter PLL Voice Module
1Channel RS485 MODBUS RTU Serial Port Multi-function Relay Module PLC Controller for Smart Home 12V DC
$12.66Relay ModuleAdd to cart>>> Manual:Click here to open SpecificationsWorking voltage:DC 12VWorking current:standby 11-13mA, 1 relay is on 44mA.Size:45 x 30 x 18 mmWeight:18 gramsMaximum load:10A / 250VAC, 10A / 125VAC, 10A / 30VDC, 10A / 28VDC, 10A / 12VDCFeatures-Six working modes:open, close, jog, self-lock, interlock, delay-AT command mode and MODBUS command control mode-Maximum delay of 9999 seconds under …
Reviews
There are no reviews yet.