Gophert NPS-1601 32V 5A Adjustable Digital DC Power Supply CPS-3205II Upgraded
$176.16
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Model:NPS-1601
Size:120*180*50mm(L*W*H)
Net Weight:0.8KG
Operation Voltage Range:198-264Vac/100-144Vac
Operation Frequency Range:45 – 65HZ
Output Voltage Range:0 – 32V
Output Current Range:0 – 5A
Efficiency (220Vac/full load):≥ 87%
Full Load Input Current (220Vac):≤ 1.4A
No Load Input Current(220V):≤ 80mA
Volt Meter Accuracy:≤ 0.1% + 2 digit
Amp Meter Accuracy:≤ 0.1% + 3 digits
Constant Voltage
Load Regulation (0-100%):≤ 30mV
Line Regulation(198-264Vac/100-144Vac):≤ 5mV
Ripple & Noise (Peak-Peak):≤ 10mV
Ripple & Noise (r.m.s):≤ 2mV
Set Accuracy:≤ 0.3% + 10mV
Transient Response Time (50%-100% Rated Load):≤ 1.0ms
Constant Current
Load Regulation (90%-10% Rated Voltage):≤ 50mA
Line Regulation (198-264Vac/100-144Vac):≤ 20mA
Current Ripple & Noise (Peak-Peak):≤ 10mAp-p
Set Accuracy:≤ 0.2% + 5mA
Features
– High efficiency >87%.
– Ripple & Noise (peak-peak) less than 10mV.
– Has Both Lock And Power Display Function (WATT).
– Output Terminal On The Front Panel, Use More Friendly.
– Zero overshoot (c.v mode and c.c mode),Protect sensitive device.
– Setting And Reading Are More Accuracy,The Resolution of Amp meter is 1mA,Volt meter is 10mV.
– Voltage And Current Setting Selector Used Tack Switch Instead Of Slide Switch, Improved The Relibility.
– Intelligent protection:Output short circuit protection, Tracking Over Voltage Protection (OVP), Tracking Over Current Protection(OCP), Over Temperature Protection (OTP) SMT components:Reflow soldering process, higher relibility.
Package Included
1 x Adjustable DC Power Supply
1 x US Plug (We will sent with an adapter according to your country)
Weight | 0.932 kg |
---|
Customers Also Viewed
Geekwrom HD 3.5 inch TFT Display Shield 800×480 for Raspberry Pi 3B 2B + Acrylic Matching Case Kit
$121.30Raspberry Pi & Orange PiAdd to cartGeekwrom HD 3.5 Inch TFT Display Shield 800×480 For Raspberry Pi 3B 2B + Acrylic Matching Case KitHD 3.5 Inch TFT Display Shield 800×480 For Raspberry Pi 3B 2BFeatures– Demensions:85mm*56.5mm;– Resolution:800 x 480, 3.5 inch;– 267ppi High PPI display screen;– 11ms High Response Time(more than 60 fps);– 160° Wide Viewing Angle;– 900:1 High Contrast Ratio;– …
intelligent Screen Solar Pure Sine Wave Power inverter 1200W-6000W DC To AC 110V 120V Converter
$121.49InvertersAdd to cartWatt 1200W Voltage 12V Type Single digital display / Watt 2200W Voltage 12V Type Single digital display / Watt 3000W Voltage 12V Type Single digital display / Watt 3000W Voltage 24V Type Single digital display / Watt 3000W Voltage 48V Type Single digital displ
500W Aquarium Submersible Stainless Steel Heating Rod Adjustable Heater
$48.59Solar CollectorsAdd to cartDescriptionMaterial:Stainless SteelColor:SilverPlug:US PlugVoltage:220-240V 50HzWattage:500WTemperature range:16-32°CCable Length:120cm/47.24inch(appr.)Heating Rod Length:41cm/16.14inch(appr.)FeaturesMade of stainless steel material, anti-rust, useful and durable.Double insulation & waterproof.Keep the water temperature steady.Suitable for aquarium:500L (for reference only).Simple adjustment and easy to read temperature indicator.Easy to install with 2 strong suckers (mounting distance of 2 suckers is about 9.5cm).Adjustment knob allows you to adjust the …
500W Aquarium Submersible Stainless Steel Heating Rod Adjustable HeaterRead More
5pcs JoyStick Module Shield 2.54mm 5 pin Biaxial Buttons Rocker for PS2 Joystick Game Controller Sensor
$14.30Other Module BoardAdd to cartFeaturejoystick joysticks standard interface module electronic building blocks and 2.54mm pin interface leads.Phillips is a two-way rocker 10K resistor, with the joystick in a different direction, tap the resistance vary. This module uses a 5V supply, the original state X, Y readout voltage of 2.5V or so, when pressed with the direction of the arrow, …
4Pcs Geekcreit Ultrasonic Module HC-SR04 Distance Measuring Ranging Transducers Sensor DC 5V 2-450cm
$9.83Sensor & Detector ModuleAdd to cartDescriptionWorking Voltage:5V(DC)Static Current:Less than 2mA.Output Signal:Electric frequency signal, high level 5V, low level 0V.Sensor Angle:Not more than 15 degrees.Detection Distance:2cm-450cm.High Precision:Up to 0.3cmInput Trigger Signal:10us TTL impulseSignal:output TTL PWL signalMode of connectionVCCtrig(T)ech0(R)GNDUse MethodSupply module with 5V, the output will be 5V while obstacle in range, or 0V if not.The out pin of this module is …
1MHz-700MHZ 3.2W HF VHF UHF FM Transmitter RF Power Amplifier for Ham Radio
$50.29RF amplifierAdd to cartApplicationBroadband RF power amplifier for all types of wireless applications, FM shortwave radios remote control toys, digital radio, etc., enter 1 milliwatt (0DBM) maximum output of 3 watts, 15V voltage supply, broadband work 1MHZ to 700MHZ can be work. As a result of well-designed, low end that can reach 35DBM (3W), at 500M, the output …
1MHz-700MHZ 3.2W HF VHF UHF FM Transmitter RF Power Amplifier for Ham RadioRead More
Reviews
There are no reviews yet.