4WD Wireless IR Remote Control Smart Chassis Car Kit for ATmega328P UNO-R3
$91.80
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
The file for you to know more
1. Video about the 4WD Smart Car 06 Tutorial:click
2. A assembled video:click
Introductions
∵ The kit is a wireless remote control smart car kit based on the ATmega328P UNO-R3 motherboard.
∵ The PCB chassis is compatible with the ATmega328P motherboard, making it easy to install UNO-R3 or other compatible motherboards.
∵ According to the installation video assembly car, each step has a clear explanation, the installation is very simple.
∵ The geared motor and battery holder are easy to install and plug and play.
∵ Ultrasonic sensor HC-SR04 can be installed
∵ Can also be controlled directly using a bluetooth module, etc.
∵ Direct control of the car with an infrared remote control
∵ TT geared motor and welded leads, small size, large torque, long life and easy to use
∵ This kit helps you learn ATmega328P UNO-R3 programming and learn to make fun projects. Very suitable for the DIY smart car project
About TT motor
– Operating voltage:3V-6VDC
– No-load speed:125 rev / min @ 3V, 208 rev / min @ 5V
– No-load current:150mA@3V, 175mA@5V
– Reduction ratio:1:48
– Torque:0.8kg.cm (maximum)
– Line length:20cm
Pacakge Included
1 x chassis plate
1 x UNO-R3 motherboard
1 x USB cable (50 cm)
1 x IO expansion board
1 x multi-angle infrared receiver module
1 x active buzzer module
4 x TT motor (welded wire)
4 x motor mounting assembly
4 x tire
1 x 14500 battery case
1 x Phillips screwdriver 3x75mm
1 x 40P female pair busbar
1 x white nylon rivets
12 x black nylon rivets
3 x copper column (M3x6+6mm)
3 x hex nut (M3x2.5)
6 x steel screw (M2x6)
2 x copper column (M2*25)
3 x screws (M3x5)
1 x infrared remote control
Weight | 0.651 kg |
---|
Customers Also Viewed
50Pcs 12V Female DC Power Socket Jack Plug Wire Connector Cable CCTV DC 5.5 x 2.1mm
$32.76Module ComponentsAdd to cartFeaturesDC 5.5 x 2.1mm.Wire Specification:0.15mm²Length:Approx. 27cmMax Current Rating:2AMax Power Rating:60WTransmission voltage:1V~38VUsage temperature:-50→~65→Material:Copper WireUse for:Led Driver/ Strip connector/ CCTV Camera.Package Included50 x 12V DC Connector Cables
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002
$87.30RF amplifierAdd to cartParameter1. Power supply voltage:11V-15V DC2. Gain:greater than 20DB in the 30MHz-1GHz frequency band3. Input and output impedance:50┯4. Maximum output power:10dBm5. Input signal:-10DBm6. Bandwidth:30MHz to 3GHz (gain is different under different frequencies)Measured gain (prototype)F=5.0MHZ GAIN=13.15DBF=10.0MHZ GAIN=23.89DBF=30.0MHZ GAIN=27.06DBF=50.0MHZ GAIN=27.92DBF=500.0MHZ GAIN=24.84DBF=1.0GHZ GAIN=22.01DBF=1.5GHZ GAIN=20.72DBF=2.5GHZ GAIN=17.65DBF=3.5GHZ GAIN=10.06DBF=4.0GHZ GAIN=9.09DBF=5.0GHZ GAIN=8.90DB7. Noise figure NF (theoretical value)500MHz@ 0.6dB1GHz@ 0.7dB2GHz@ 0.7dB3GHz@ 1.1dB4GHz@ 1.6dB5GHz@ 2.1dBComparison …
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002Read More
RX24 100W 30R 30RJ Metal Aluminum Case High Power Resistor Golden Metal Shell Case Heatsink Resistance Resistor
$6.55Electronic Accessories & SuppliesAdd to cartFeaturesIt has the characteristics of small size, high power and high precision.It is sealed by professional technology.It has the advantages of stronger heat resistance, higher temperature resistance, moisture resistance, high anti-vibration and explosion protection.Scope of application:Testing power supply, frequency converter, automobile LED lamp, automation equipment, audio, frequency divider, servo industry and other harsh industrial control …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter Module
$16.71Smart ModuleAdd to cartItem OverviewThe SRX882 is a super-heterodyne receiver module with a micropower and strong driving force in conjunction with the ASK transmitter module. It has high stability, anti-interference and high cost performance, and also has a strong driving force, which can pass ROHS, FCC, CE and other certifications. The data port can be directly connected to …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter ModuleRead More
13.5mm Adjustable Laser Pointer Module Holder Mount Clamp 3 Axis
$42.51Engraving Parts & AccessoriesAdd to cartDescriptionMaterial:stainless steelColor:blackMount Inner Diameter:13.5mmSize:40X60mm/1.57X2.36inch(L*H)Feature1. Stainless steel laser moudle holder2. Professional angle and height adjustable design3. Installed on the laser module,it can become a professional laser pointer or laser locator4. Can also used a as a heatsink for the laser module,extend the laser module life time5. Fit for 12mm diameter laser modulePackage included1X Laser Module Holder
Mask Scary Glow Mask LED Mask for Halloween Mask Party Masks Neon Maske Skeleto Halloween Party Decor
$17.17EL ProductsAdd to cartColor. Red / Color. Orange / Color. Yellow / Color. Blue / Color. Blue / Color. Purple / Color. White / Color. Pink / Color. Fluorescent Green / Color. Green / Color. Transparent Blue /
Reviews
There are no reviews yet.