RIDEN 100V/20A 7in1 OLED Multifunction Tester Voltage Current Time Temperature Capacity Voltmeter Ammeter Electrical Parameter Meter
$26.23
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Technical Parameters
Voltage measurement range:DC00.0-99.9V Current measurement range:DC00.0-20.0A
Time measurement range:0-99h59min Power measurement range:0-999.9-2000 W
Temperature measurement range:-15 °c ~60°c Capacity accumulation range:0-999.99-9999.9 Ah
Energy accumulation range:0-99999Wh-9999KWh Voltage measurement accuracy:± (0.5% + 2digits)
Current measurement accuracy:± (1% + 2 digits) Product weight:33g
Product size:48mm*29mm*22mm (L*W*H)
Display Interface Instruction
↘Run time
Power display
Data set
Temperature display
Capacity display
Voltage display
Current display
№Energy display
Button Function Instruction
This tester has 0 and 1 two data groups; and data groups are switched by pressing the key.
When data group is the 1 group, the current capacity and energy will be stored after power off.
And the stored values will be accumulated after power on. When the data group is the 0 group,
the current capacity and energy will be stored after power off; when power on next time,
the stored capacity and energy are blinking displayed. But when the new capacity is up to 0.01Ah,
the stored capacity and energy will be covered, and the values will start over. At the two data groups,
the accumulated values can be cleared to zero by keeping pressing the key.
Zero calibration operation
With the aging of components and influence of ambient temp, there might be tiny error for the current reading,
especially when measuring low current. To calibrate it:1, power off the meter.2, disconnect the load.
3 press and hold the front button .4, power on the meter.5, release the button when you see “AAA Inch on the screen.
Done
The Wiring Diagram Instruction
↘Red thin line
Black thin line
Yellow thin line
Red thick line
Black thick line
Load
Please ensure proper wiring in strict accordance with the wiring diagram.
Using Isolated Power Supply to power the meter
The two power supplies must be isolated and don’t have any connections between them.
The voltage of the isolated power supply must be less 60V
Using system to power the meter
The black thin wire connects nothing and you should use insulator wrap it to avoid short circuit.
Using DC-DC converter to power the meter
The black thin wire connects nothing and you should use insulator wrap it to avoid short circuit.
The DC-DC converter must be common cathode structure.
Package included
1 x 100V/20A 7in1 OLED Multifunction Tester
Weight | 0.033 kg |
---|
Customers Also Viewed
LED Light Lighting Kit ONLY for LEGO 60141 City Series Police Station Bricks Toy
$54.66DIY Electronic KitsAdd to cartDescriptionThe product is just a light kit, not included the model!!!Interface:USBColor:As the picture shownFitmentONLY For LEGO 60141 City Series Police Station Bricks ToysFeaturesEasy to install.LED powered by USB.Make your model more cool.Package Included1 x LED Light Kit(Model Not Included)
5V 8 Channel Level Trigger Optocoupler Relay Module
$19.67Relay ModuleAdd to cartDescriptionThe module uses genuine quality relay, normally open interfacesUsing SMD optocoupler isolation, driving ability, stable performanceThe module can be high or low by a jumper setting triggerFault-tolerant design, even if the control line is broken, the relay will not operateThe power indicator (green), the relay status indicator (red)The interface design of human nature, all interfaces …
5V 8 Channel Level Trigger Optocoupler Relay ModuleRead More
Transmitter Wireless Remote Control Switch 6V 4CH Channel 315Mhz
$8.73Smart ModuleAdd to cartNoteThis product does not supply any instructions, please reference the description.This version does not support copy code function, please note about this before you order it.FeatureVoltage:6VWorking frequency:315mhzExtremely easy to set up and useLearning face to face in secondsOnly copy of a fixed code, can not be copied rolling codeCovers application ranging from simple domestic remote …
Transmitter Wireless Remote Control Switch 6V 4CH Channel 315MhzRead More
DIY D880 Transistor Series Power Supply Regulator Module Board Kit
$6.55DIY Electronic KitsAdd to cartNote:This is a DIY kit, you need to assemble it, no instruction supply.SepecificationInput voltage:AC 12-17V (No direction)Output voltage:DC 8-14V (adjustable)Output current:500mABoard size:4.9 * 3.5cmPackage includes1 x PCB board2 x 9013 transistor1 x D880 transistor1 x 15 * 10 * 20mm heatsink1 x M3 * 6 screws2 x 3.96-2P pillars4 x 1N4007 diode1 x 0.5W 6.8V …
DIY D880 Transistor Series Power Supply Regulator Module Board KitRead More
Reviews
There are no reviews yet.