RIDEN 100V/20A 7in1 OLED Multifunction Tester Voltage Current Time Temperature Capacity Voltmeter Ammeter Electrical Parameter Meter
$26.23
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Technical Parameters
Voltage measurement range:DC00.0-99.9V Current measurement range:DC00.0-20.0A
Time measurement range:0-99h59min Power measurement range:0-999.9-2000 W
Temperature measurement range:-15 °c ~60°c Capacity accumulation range:0-999.99-9999.9 Ah
Energy accumulation range:0-99999Wh-9999KWh Voltage measurement accuracy:± (0.5% + 2digits)
Current measurement accuracy:± (1% + 2 digits) Product weight:33g
Product size:48mm*29mm*22mm (L*W*H)
Display Interface Instruction
↘Run time
Power display
Data set
Temperature display
Capacity display
Voltage display
Current display
№Energy display
Button Function Instruction
This tester has 0 and 1 two data groups; and data groups are switched by pressing the key.
When data group is the 1 group, the current capacity and energy will be stored after power off.
And the stored values will be accumulated after power on. When the data group is the 0 group,
the current capacity and energy will be stored after power off; when power on next time,
the stored capacity and energy are blinking displayed. But when the new capacity is up to 0.01Ah,
the stored capacity and energy will be covered, and the values will start over. At the two data groups,
the accumulated values can be cleared to zero by keeping pressing the key.
Zero calibration operation
With the aging of components and influence of ambient temp, there might be tiny error for the current reading,
especially when measuring low current. To calibrate it:1, power off the meter.2, disconnect the load.
3 press and hold the front button .4, power on the meter.5, release the button when you see “AAA Inch on the screen.
Done
The Wiring Diagram Instruction
↘Red thin line
Black thin line
Yellow thin line
Red thick line
Black thick line
Load
Please ensure proper wiring in strict accordance with the wiring diagram.
Using Isolated Power Supply to power the meter
The two power supplies must be isolated and don’t have any connections between them.
The voltage of the isolated power supply must be less 60V
Using system to power the meter
The black thin wire connects nothing and you should use insulator wrap it to avoid short circuit.
Using DC-DC converter to power the meter
The black thin wire connects nothing and you should use insulator wrap it to avoid short circuit.
The DC-DC converter must be common cathode structure.
Package included
1 x 100V/20A 7in1 OLED Multifunction Tester
Weight | 0.033 kg |
---|
Customers Also Viewed
24S 72V Lithium Battery 3.2V Power Protection Board 30A-180A with Temperature Protection Equalization Function Overcurrent Protection BMS PCB
$60.74Battery Protection ModuleAdd to cartCurrent 30A / Current 40A / Current 50A / Current 60A / Current 70A / Current 100A / Current 130A / Current 150A / Current 180A /
ONLY LED Light Lighting Kit for Lego 42096 Technic Porsche 911 RSR Bricks Toys
$18.50DIY Electronic KitsAdd to cartDescriptionInterface:USBColor:As the picture shownFitmentONLY For Lego Technic Porsche 911 RSR (42096) Bricks ToysFeaturesEasy to install.LED powered by USB.Make your model more cool.ONLY For Lego 42096 Technic Porsche 911 RSR Bricks.Package Included1 x LED Light Kit(Model Not Included)1 x Battery Case
500mL Clear Borosilicate Glass Filtering Flask Vacuum Filtration Flask Bottle Lab Glassware
$40.49Glassware KitAdd to cartDescription– Flasks are glass or plastic containers for storing or collecting chemical samples or solutions in scientific laboratories.– It shaped like a cone with a wide, flat base that narrows to a neck opening, which can be closed with a stopper or cap.SpecificationMaterial:Borosilicate GlassCapacity:500mLFlask Style:Filtering (vacuum)Package Included1 x Glass Filtering Flask
2400mAh Portable Solar Panel Charger Reusable Solar Generator System USB Port with Lamp Lighting
$64.79Solar GeneratorAdd to cartFeature1.Reusable solar generator, solar charging, environmental protection and energy saving, you can use it in anywhere when there is adequate sunshine.2.Equipped with USB charging cable, you can charge your electronic products easily with the built-in large capacity battery, you can charge for mobile phones, MP3, MP4, digital cameras and other electronic products.3.White LED light and …
20pcs Sensor Shield V5.0 Sensor Expansion Board for DIY Electronic Building Blocks of Robot Parts
$62.36Sensor & Detector ModuleAdd to cartFeaturesLatest Sensor Shield V5.0 sensor expansion board is still before laminated design PCB Immersion Gold processing technology, the motherboard is not only Duemilanove 2009 controller of digital and analog interface extended to the steering gear line order form, also ad hoc IIC interface, 32 Servo controller interface , bluetooth module communication interface, SD card module …
Reviews
There are no reviews yet.