Geekcreit T.SK106A.03 T.SK105A.03 Universal LCD TV Controller Driver Board PC/VGA/HD/USB interface
$30.60
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
T.RD8503.03 Firmware:Click here to open
T.V53.03 Manual:Click here to open
T.V53.03 Firmware:Click here to open
T.SK106A.03 Manual:Click here to open
T.SK106A.03 Firmware:Click here to open
New Version T.SK105A.03 Manual:Click here to open
New Version T.SK105A.03 Firmware:Click here to open
Note:Since the driver board model is updated frequently, the appearance and chip will be different, please refer to the actual received. If you mind this, please buy carefully.
Description
Model:T.V53.03 (Update from December 25, 2019)
Model:T.SK106A.03 (Update from September 1, 2020)
Update Model:T.SK105A.03 (Update from November, 2020) The specific model is mainly based on the received model, pay attention to burning the corresponding model firmware.
Input Interface:PC / HD / TV / USB multimedia playing
Voltage:Single 12 V
Screen interface:LVDS Single 6 / 8 , Double 6 / 8
Screen voltage:3.3V / 5V / 12V
Only supports the resolution of
1920×1200
1920×1080
1680×1050
1680×945
1600X1200
1600×900
1400X1050
1440×900
1366×768
1280×1024
1280×854
1280×800
1280×768
1280×720
1024×768
1024×600
800×600
Burning method:to record the screen program in the USB flash disk, USB flash disk inserted into board, plug in the keypad, electricity; About after a few seconds, press the keypad lights start alternating red and green flash, flash lights began to write programs (please do not power), light in the slow flash first, after a slow flash flash, will speed up the quick flash, long after the last until the lights stop flashing light is the program written, electricity burn with USB flash disk to complete the program.
Not only USB interface can be used to upgrade programs, but also can use to play video, basically formats are supported. You can also set a boot display pictures or LOGO
Notice
1. The power requirement of 12V4A
2. Screen voltage jump line according to the working voltage of screen jump to the corresponding position
3. Use to adapt to the board of general screen line
4. The screen line not to reverse and dislocation
Programming
1. The screen of the program is copied(.bin file) to the usb drive.
2. Insert USB Flash disk to the USB port on the board
3. Connected to the keypad, electricity again, until you see by the indicator lights on the keypad after flashing in red and green, until after the indicator light flashing, unplug the power, then pull out USB Flash disk, afresh power on.(Note that write programs do not power outages, crashing won’t be able to use)
Package included
1 x Controller Board
1 x Remote control
1 x IR
Weight | 0.13 kg |
---|
Customers Also Viewed
10Pcs 50cm Fishing Lures 316 Stainless Steel Wire Trace Leader Spinner Swivel Line
$14.16Switch AccessoriesAdd to cartSpecificationMaterial:316 Stainless steel & nylonColor:RedLength:50cmQuantity:10pcs/setFeatures-With black nickel rolling swivel and cross lock snap-Durable enough to prevent breakage of the wire when the fish is fighting-Capable to handle up to 50kgPackage Includes10x trace wires
5pcs 12-60V Car Lead Acid Battery Charge Level indicator Battery Tester Lithium Battery Capacity Meter Dual Red LED Tester Digital Voltmeter
$22.60Electronic Accessories & SuppliesAdd to cartDescriptionThis power meter is suitable for 12V, 24V, 36V, 48V, 60V, battery cars (not waterproof). It can also measure lithium batteries, polymer batteries, nickel-metal hydride batteries. Can also be used for other power / voltage measurement purposes.How to use:Connect the positive and negative terminals of the display board to the positive and negative terminals of …
5Pcs PCI-E 6-pin To 2x 6+2-pin Power Splitter Cable PCIE PCI Express
$19.22Electronic Accessories & SuppliesAdd to cartDescriptionConnect any graphics card to a single 6-pin PCI-Express Power Cable. The 6+2-pin maleconnectors offer maximum versatility.Warning:Do not overload your power supply or the 6-pin power cable, running more than 300Wover a single 6-pin 18AWG PCI-Express cable is a fire hazard.Connectors:6-pin PCIe Female, 5x 6+2-pin PCIe MaleLength:8 inches / 20cmWire:18 AWG copperPackage included5 x PCI-e …
5Pcs PCI-E 6-pin To 2x 6+2-pin Power Splitter Cable PCIE PCI ExpressRead More
DC 12V 4CH Wireless Remote Control Relay Switch 2 Transceiver with 1 Receiver 315MHz
$19.67Smart ModuleAdd to cartFeaturesIt is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the transmitter. It has 4 Relays which can make the equipment turn or reverse, on/off and so on come true. The volume is small and the performance is stable …
DC 12V 4CH Wireless Remote Control Relay Switch 2 Transceiver with 1 Receiver 315MHzRead More
5pcs 2.4G NF-04 Wireless SPI Module BK2425 250k~2Mbps Transparent Transmission Receiver for Doorbell Remote Control Switch
$11.42Smart ModuleAdd to cartIntroductionNF-04 is a 2.4G wireless module with small size and on-board antenna. It has a high airspeed (up to 2Mbps), SPI interface, and a pure hardware module. It has high stability, high cost performance and good spectrum test characteristics. , small size, using all industrial grade components.NF-04 can be widely used in various Internet of …
PEB-1 Expansion Board +TSOP48 Socket + FPC Row Line FPC Base
$83.13Electronic Accessories & SuppliesAdd to cartFeaturesPEB – 1 extension board, supporting RT809F use, support notebook IT8586E/IT8580E models such as EC, support the notebook, computer motherboards commonly used 32/40/48 feet BIOS chips (29/39/49/50 series FWH/LPC / 8 bit / 16 bit NOR flash), contact with pin detection, automatic identification of short circuit protection and unique features, to read and write speed …
PEB-1 Expansion Board +TSOP48 Socket + FPC Row Line FPC BaseRead More
Smart Robot Chassis Car Kit with 2Pcs Motor+ Speed Encoder + Battery Box for Arduino – products that work with official Arduino boards
$26.57Smart Robot & Solar PanelAdd to cartFeaturesMechanical structure is simple, it is easy to install.This car is the tachometer encoder.Can be used for distance measurement.Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing, wireless remote control.Download:www.uctronics.com/download/U3800.zipMotor ParametersVoltage:DC 3V:DC6V:DC 7.2VCurrent:160mA:220mA:250mANo-load Speed:120 rpm/min:200 rpm/min:250 rpm/minLoad Speed:100 rpm/min:175 rpm/min:210 rpm/minTorque:0.45 kg.cm:1.0 kg.cm:1.5 kg.cmReduction Ratio:1:48Noise:65dBMotor Size:65mm x 18mm …
3Pcs Fever Debuggable HIFI Speaker High and Low Sound 2-way Speaker Audio Crossover Kit
$21.65DIY Electronic KitsAdd to cartDescriptionHigh and low sound two-way, can be used for home audio, or car audio. High-quality components, fine workmanship. The four modes of high and low sound are adjustable, the whole process is free of welding, the use is simple and convenient, and the distribution of high and low sounds is more precise.Size:45*28mmPackage included3 x Two-way …
3Pcs Fever Debuggable HIFI Speaker High and Low Sound 2-way Speaker Audio Crossover KitRead More
Reviews
There are no reviews yet.