433MHz Voice APP Remote Control Switch Relay Smart Switch 10A Smart ON-OFF Device
$65.60
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specsification
Remote relay receiver
– IEEE:802.15.4MAC/PHY
– 433mhz, AC90-250V ,50/60Hz.
– Load power:MAX 10A
– Switch size:89*51*26 (mm)
– Encrypted connection, no signal interferences between switches
– Can be paird to 20 remote control max at the same time
Notice:The switch can cut off the ‘L’ and ‘N’ lines at the same time, which is safer and completely solves the influence of the return current on the device.
How to connect to ZigBe
Notice:A compatible ZigBe Gateway is required if you want to use this switch by app. we do not supply gateway.
1. Power on your ZigBe Gateway,press and hold the pairing button for 5 seconds, light blink;
2. Open“TUYA”or“SMART LIFE”app, connect to 2.4G/4G network, find device, add your gateway when it is discovered.
Search TUYA ,Smart Life on store app
3. Power on the switch,green light on ,then press and hold pairing button for 8 seconds,green light blinks;
4. Enter into the gateway on“TUYA”app, press“+”to add subdevice,add this switch when it is discovered;
5. Compatible with Smart speakers:Amazon Alexa or Google Home.
If your smart speaker is with ZigBe Gateway module inside,then no need extra gateway, you can control our ZigBe switch by your smart speaker directly. For example:ECH0 plus, ECH0 show 2nd,ECH0 studio;
How to set remote mode
1. Power on the switch,green light on,
Find the remote pairing button aside;
2. Clean code ,clear all remote control data
Press the remote pairing button 8 times to clean code if you want to reset mode(LED flash 3 times fast then off).
But no need to clean code if you add more remote
3. Setting Toggle Mode
Press pairing button 2 times fast,red LED light on and flash slowly,press the remote control button,red LED flash 3 times then come off. Setting successfully.
(Press remote control button, the receiver’s relay is ON,press button again,the receiver’s relay is OFF)
4. Setting Latched Mode
(Note:When you choose“Latched Mode”,you need to setting two different buttons on the remote control,the first time learn is for“ON”,the second time learn for“OFF”.For example:button A=ON,button B=OFF)
Press the pairing button 3 times fast,red LED light on and flash slowly,then press the remote button A,red LED flash 3 times, then press the remote button B, red LED flash 3 times again ,and then come off,settingsuccessfully.
(Press remote button A,relay on,press remote button B,relay off)
1. Share Control
The owner can share the devices to other“Smart Life”accounts.While sharing devices,both should stay online on“Smart Life”.Because if the account you want to share is not online,he/she will not receiver the invitation message.
Package includes
1 x Remote control
2 x Receiver
Weight | 0.172 kg |
---|
Customers Also Viewed
5Pcs CP2102 USB To TTL/Serial Module Downloader
$21.98Converter BoardAdd to cart5Pcs CJMCU CP2102 USB To TTL/Serial Module UART STC Downloader For Driver Installation Introduction:http://forum.hobbyant.com/forum-topic-56275.html Description CJMCU-CP2102 its highly integrated, built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM and asynchronous serial data bus (UART), supports full-featured modem signal without any external USB devices. CJMCU-CP2102 works with other USB-UART adapter circuit similar to the driver …
10pcs 180 Degree USB 3.0 Type A female Socket Connector SMT Charging Socket Plug Connector
$10.11Terminal BlocksAdd to cartSpecificationsColorBlueRated Current1.5ARated Voltage30VInsertion Force35N MaxDurability3000 Cycles Min Rubber CorePBT / Icp Ul94V-0 Resistance To Voltage500V Ac Min. Insulation Resistance≥1000MΩPull-Out Force10N Min.Initial 8-20N AfterWorking Temperature-20 Degrees To 60 Degrees Contact Impedance≤30mΩTerminalsBrass C2680,Nickel Base,Gold-Plated 1 u,Package included-10pcs X 180Degree Connectors
Dual Servos Knob Serial Port Control Board Futaba MG995 SG90 Steering Gear Debugging Module
$13.11Other Module BoardAdd to cartFeature1. The onboard stable 8-bit MCU is used to generate high-resolution PWM signals with precise control.2. Support manual mode and return to medium mode, switch by button, with mode indicator.3. Support knob adjustment or serial command control in manual mode.4. The serial port command control can use the matching host computer software or connect to …
Dual Servos Knob Serial Port Control Board Futaba MG995 SG90 Steering Gear Debugging ModuleRead More
Keyes Brick Laser Head Sensor Module (pad hole) with Pin Header Board Digital Signal
$4.36Sensor & Detector ModuleAdd to cartDescriptionThis sensor is fully compatible with ARDUI NO single-chip microcomputer, and its connection port is also compatible with Arduino sensor expansion board. It is mainly composed of a laser head, which is composed of a light-emitting tube core, a condenser lens, and a copper adjustable sleeve. After connecting to the power supply, we directly input …
Keyes Brick Laser Head Sensor Module (pad hole) with Pin Header Board Digital SignalRead More
5pcs DC3~5V AK-119 433.92MHZ 4 Pin Superheterodyne Receiver Board without Decoding -105dBm
$10.37Other Module BoardAdd to cartFeatures1. The product is small in size, high in sensitivity and strong in anti-interference ability;2. The same definition as the four-pin pin of RXB12, the usage is the same. The unit price is lower than RXB12 and can be directly replaced.Technical ParametersWorking voltage:DC3~5VTransmission rate:4.80KBPSQuiescent current:6mAReceive sensitivity:-105dBmDimensions:30 * 9 * 5mmWorking temperature:-20 ° C ~ +80 …
5pcs DC3~5V AK-119 433.92MHZ 4 Pin Superheterodyne Receiver Board without Decoding -105dBmRead More
150g Capacity Quartz Silica Melting Crucible Pot for Gold Silver Platinum Refine
$16.19Glassware KitAdd to cart150g Capacity Quartz Silica Melting Crucible Pot For Gold Silver Platinum RefineDescriptionMaterial:quartzCapacity:150gDiameter:43X57mm/1.69inch X2.24inch(ID*OD)Height:20mm/0.79inchDeepth:15mm/0.59inchNet Weight:40gFeatureQuartz silica melting crucibleProduced by modern ceramic processing technologyHigh orrosion resistance and strength,the temperature resistance up to 2800℃/5072FPerfect for gold silver casting and refine usagePackage included1X Quartz Silica Melting Crucible
WXD3-13-2W Precision Potentiometer 470R 470 Ohm Wirewound Multi-Turn Potentiometer
$4.50Module ComponentsAdd to cartSpecificationsResistance range:470┯Resistance tolerance:÷ 5%Rotation angle:3600 ÷ 20 Number of laps:10 lapsRated voltage:160VStarting torque:3.5 ~ 100mN.mRated power:2W (85 →) 0W (125 →)Linearity accuracy:÷ 0.3%Mechanical durability:10,000 weeksPackage included1 x Potentiometer
Reviews
There are no reviews yet.