433MHz Voice APP Remote Control Switch Relay Smart Switch 10A Smart ON-OFF Device
$65.60
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specsification
Remote relay receiver
– IEEE:802.15.4MAC/PHY
– 433mhz, AC90-250V ,50/60Hz.
– Load power:MAX 10A
– Switch size:89*51*26 (mm)
– Encrypted connection, no signal interferences between switches
– Can be paird to 20 remote control max at the same time
Notice:The switch can cut off the ‘L’ and ‘N’ lines at the same time, which is safer and completely solves the influence of the return current on the device.
How to connect to ZigBe
Notice:A compatible ZigBe Gateway is required if you want to use this switch by app. we do not supply gateway.
1. Power on your ZigBe Gateway,press and hold the pairing button for 5 seconds, light blink;
2. Open“TUYA”or“SMART LIFE”app, connect to 2.4G/4G network, find device, add your gateway when it is discovered.
Search TUYA ,Smart Life on store app
3. Power on the switch,green light on ,then press and hold pairing button for 8 seconds,green light blinks;
4. Enter into the gateway on“TUYA”app, press“+”to add subdevice,add this switch when it is discovered;
5. Compatible with Smart speakers:Amazon Alexa or Google Home.
If your smart speaker is with ZigBe Gateway module inside,then no need extra gateway, you can control our ZigBe switch by your smart speaker directly. For example:ECH0 plus, ECH0 show 2nd,ECH0 studio;
How to set remote mode
1. Power on the switch,green light on,
Find the remote pairing button aside;
2. Clean code ,clear all remote control data
Press the remote pairing button 8 times to clean code if you want to reset mode(LED flash 3 times fast then off).
But no need to clean code if you add more remote
3. Setting Toggle Mode
Press pairing button 2 times fast,red LED light on and flash slowly,press the remote control button,red LED flash 3 times then come off. Setting successfully.
(Press remote control button, the receiver’s relay is ON,press button again,the receiver’s relay is OFF)
4. Setting Latched Mode
(Note:When you choose“Latched Mode”,you need to setting two different buttons on the remote control,the first time learn is for“ON”,the second time learn for“OFF”.For example:button A=ON,button B=OFF)
Press the pairing button 3 times fast,red LED light on and flash slowly,then press the remote button A,red LED flash 3 times, then press the remote button B, red LED flash 3 times again ,and then come off,settingsuccessfully.
(Press remote button A,relay on,press remote button B,relay off)
1. Share Control
The owner can share the devices to other“Smart Life”accounts.While sharing devices,both should stay online on“Smart Life”.Because if the account you want to share is not online,he/she will not receiver the invitation message.
Package includes
1 x Remote control
2 x Receiver
Weight | 0.172 kg |
---|
Customers Also Viewed
50Pcs 12V Female DC Power Socket Jack Plug Wire Connector Cable CCTV DC 5.5 x 2.1mm
$32.76Module ComponentsAdd to cartFeaturesDC 5.5 x 2.1mm.Wire Specification:0.15mm²Length:Approx. 27cmMax Current Rating:2AMax Power Rating:60WTransmission voltage:1V~38VUsage temperature:-50→~65→Material:Copper WireUse for:Led Driver/ Strip connector/ CCTV Camera.Package Included50 x 12V DC Connector Cables
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002
$87.30RF amplifierAdd to cartParameter1. Power supply voltage:11V-15V DC2. Gain:greater than 20DB in the 30MHz-1GHz frequency band3. Input and output impedance:50┯4. Maximum output power:10dBm5. Input signal:-10DBm6. Bandwidth:30MHz to 3GHz (gain is different under different frequencies)Measured gain (prototype)F=5.0MHZ GAIN=13.15DBF=10.0MHZ GAIN=23.89DBF=30.0MHZ GAIN=27.06DBF=50.0MHZ GAIN=27.92DBF=500.0MHZ GAIN=24.84DBF=1.0GHZ GAIN=22.01DBF=1.5GHZ GAIN=20.72DBF=2.5GHZ GAIN=17.65DBF=3.5GHZ GAIN=10.06DBF=4.0GHZ GAIN=9.09DBF=5.0GHZ GAIN=8.90DB7. Noise figure NF (theoretical value)500MHz@ 0.6dB1GHz@ 0.7dB2GHz@ 0.7dB3GHz@ 1.1dB4GHz@ 1.6dB5GHz@ 2.1dBComparison …
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002Read More
RX24 100W 30R 30RJ Metal Aluminum Case High Power Resistor Golden Metal Shell Case Heatsink Resistance Resistor
$6.55Electronic Accessories & SuppliesAdd to cartFeaturesIt has the characteristics of small size, high power and high precision.It is sealed by professional technology.It has the advantages of stronger heat resistance, higher temperature resistance, moisture resistance, high anti-vibration and explosion protection.Scope of application:Testing power supply, frequency converter, automobile LED lamp, automation equipment, audio, frequency divider, servo industry and other harsh industrial control …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter Module
$16.71Smart ModuleAdd to cartItem OverviewThe SRX882 is a super-heterodyne receiver module with a micropower and strong driving force in conjunction with the ASK transmitter module. It has high stability, anti-interference and high cost performance, and also has a strong driving force, which can pass ROHS, FCC, CE and other certifications. The data port can be directly connected to …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter ModuleRead More
13.5mm Adjustable Laser Pointer Module Holder Mount Clamp 3 Axis
$42.51Engraving Parts & AccessoriesAdd to cartDescriptionMaterial:stainless steelColor:blackMount Inner Diameter:13.5mmSize:40X60mm/1.57X2.36inch(L*H)Feature1. Stainless steel laser moudle holder2. Professional angle and height adjustable design3. Installed on the laser module,it can become a professional laser pointer or laser locator4. Can also used a as a heatsink for the laser module,extend the laser module life time5. Fit for 12mm diameter laser modulePackage included1X Laser Module Holder
Mask Scary Glow Mask LED Mask for Halloween Mask Party Masks Neon Maske Skeleto Halloween Party Decor
$17.17EL ProductsAdd to cartColor. Red / Color. Orange / Color. Yellow / Color. Blue / Color. Blue / Color. Purple / Color. White / Color. Pink / Color. Fluorescent Green / Color. Green / Color. Transparent Blue /
Reviews
There are no reviews yet.