TKS-M8 4-40V DC Motor Speed forward and Reverse Controller with Shell 20A Relay P0 Optocoupler Isolation Anti-jamming
$17.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Working voltage:4-40V DC
Module power consumption:0.6W (static 0.1W)
Signal input:active low. The input is the negative of the optocoupler. A signal is considered to be present when the voltage is below 2V.
Response speed:K1 K2 is 20mS, SW1 SW2 is 50mS.
Output current 20A
PCB size:83*46*20mm
Shell size:87*54*59mm
User Manual
K1:Forward signal
K2:Reverse signal
SW1:Forward limit
SW2:Reverse limit
1. Press K1 and the motor will start to rotate immediately until SW1 closes.
2. Press K2 and the motor immediately starts to reverse until SW2 closes and stops.
3. When K2 is pressed during forward rotation, it will switch to reverse immediately. When K1 is pressed during reverse rotation, it will switch to forward rotation immediately.
1. What mode is P0
P0 is self-locking mode. For example, if the external forward switch (K1) is pressed, the motor will immediately rotate forward. At this time, the instant switch will be released and the motor will continue to rotate forward. It will not stop until the reverse signal (K2) or the forward stop signal (SW1) is encountered.
2. What are the requirements for the signal, can I connect the sensor
The signal is active low and can be a three-wire sensor (NPN-NO type). K1 K2 SW1 SW2 is still the specification.
3. What is the input and output voltage
The input voltage range of the TKS-M8 is 4V~40V, but to ensure reliable operation, it is recommended to use it within the range of 6V-36V. This module is wide voltage. The output motor is the same as the input voltage.
4. What is the limit signal
The limit signal can also be referred to as a stop signal. The limit signal is triggered and level enabled. For example, if a short limit signal is encountered during forward rotation, it will stop, even if the limit signal disappears, it will stop. You must re-transmit the signal once again to get forward again.
5. Can drive a large motor
The maximum current of the TKS-M8 at 12V is 20A, and the maximum current is 10A when the voltage is 24V. The maximum drive motor power is generally not more than 80W. It is recommended that the motor’s stall motor be the standard.
7. Can I achieve automatic forward and reverse
The TKS-M8 does not have a timing function, so strictly speaking, it cannot automatically reciprocate. However, with the start switch, the start switch (A), and the end switch (B), it is possible to achieve infinite reciprocating operation between the two points A and B. Connection method:The start switch and the start switch are connected to K1, the end switch is connected to K2, and SW1 SW2 is not connected. Note that all switches are normally open.
Package Included
1 x TKS-M8 P0 4-40V DC Motor Forward and Reverse Controller with Shell
Weight | 0.081 kg |
---|
Customers Also Viewed
6Pcs Pulse Power Supply Plug Connector Pigtail for Polaris Ranger XP1000 & RS1 2018 2019
$30.36ConnectorsAdd to cartSpecificationColor:As the pictures shownQuantity:6 PcsFitmentFor New Polaris Ranger XP 1000 3 SeaterFor Polaris Ranger and Polaris RS1For Polaris Ranger Crew XP 1000 EPS 2018 (Any Machine with Pulse Style Connector)For Polaris Ranger XP 1000 EPS 2018 (Any Machine with Pulse Style Connector)Features– Easy to Install.– Fully sealed and weather proof.– Plugged right in and seals …
6Pcs Pulse Power Supply Plug Connector Pigtail for Polaris Ranger XP1000 & RS1 2018 2019Read More
900pcs PH2.0 2p 3p 4 pin 2.0mm Pitch Terminal Kit / Housing / Pin Header JST Connector Wire Connectors Adaptor PH Kits
$21.69Electronic Accessories & SuppliesAdd to cartDescription2pin = 20 sets = 120pcs3pin = 20 sets = 120pcs4pin = 20 sets = 120pcsPin Connector Terminal:540 pcsTotal:60set(900pcs)Package included3 x 300pcs PH2.0 2p 3p 4 pin 2.0mm Pitch Terminal Kit
PortaPack H1 with TCXO Touch Screen for HackRF one 1MHz-6GHz SDR Receiver and Transfer Board AM FM SSB ADS-B SSTV Ham Radio Transceiver
$223.22Motherboard & Development BoardAdd to cartShell:Product ID:1566465FeatureNote:This version includes TCXO.WIKI:https://github.com/sharebrained/portapack-hackrf/wikiFAQ:Black screenSolution:The program is not burned, please install the program:to openThe PortaPack attaches to your HackRF and adds a touchscreen display, navigation controls, headphone jack, a real-time clock, and a micro SD card slot.Just add a USB battery, and yoursquore ready to explore the radio spectrum wherever you are. The PortaPack …
Yahboom Ultrasonic Module for Microbit Ranging
$15.35Smart Robot & Solar PanelAdd to cartIntroduction of Ultrasonic moduleMore info for you to download1.Working principleThe ultrasonic module is a sensor that uses ultrasonic characteristics to detect the distance. It has two ultrasonic probes for transmitting and receiving ultrasonic waves. The range of measurement is 3-450 cm.3-1 Ultrasonic emission and reception schematic(1) You need to input a high level signal of …
2 Channel Port 180-240V ON/OFF Wireless Digital Remote Control Light Wall Switch 20M
$10.92Smart ModuleAdd to cartFeaturesEasy to operate which can fully turn on or turn off the whole circuit.With the capability of penetrating walls and anti-disturbance.Fast and easy installation, not obstructed by walls, capable of connecting any loadsRemote controller and switch can be used simultaneously for ease and flexibilityEquipped with high load relay,high voltage capacitor and high quality receiver.Apply electrical:Droplight, …
2 Channel Port 180-240V ON/OFF Wireless Digital Remote Control Light Wall Switch 20MRead More
W5500 Ethernet Module LAN Network Module with Logic 3.3V/5V Shield
$22.50Smart ModuleAdd to cartFeatureThe W5500 – Ethernet LAN Network Module can be used to provide your projects with internet connectivity. The W5500 module enables users to have Internet connectivity in their applications just by using the single chip in which TCP/IP stack, 10 / 100 Ethernet MAC and PHY embedded. Supports 8 independent sockets simultaneously.The W5500 Ethernet module …
W5500 Ethernet Module LAN Network Module with Logic 3.3V/5V ShieldRead More
2.4G NF-04 Wireless SPI Module BK2425 250k~2Mbps Transparent Transmission Receiver for Doorbell Remote Control Switch
$3.60Smart ModuleAdd to cartIntroductionNF-04 is a 2.4G wireless module with small size and on-board antenna. It has a high airspeed (up to 2Mbps), SPI interface, and a pure hardware module. It has high stability, high cost performance and good spectrum test characteristics. , small size, using all industrial grade components.NF-04 can be widely used in various Internet of …
Reviews
There are no reviews yet.