TKS-M8 4-40V DC Motor Speed forward and Reverse Controller with Shell 20A Relay P0 Optocoupler Isolation Anti-jamming
$17.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Working voltage:4-40V DC
Module power consumption:0.6W (static 0.1W)
Signal input:active low. The input is the negative of the optocoupler. A signal is considered to be present when the voltage is below 2V.
Response speed:K1 K2 is 20mS, SW1 SW2 is 50mS.
Output current 20A
PCB size:83*46*20mm
Shell size:87*54*59mm
User Manual
K1:Forward signal
K2:Reverse signal
SW1:Forward limit
SW2:Reverse limit
1. Press K1 and the motor will start to rotate immediately until SW1 closes.
2. Press K2 and the motor immediately starts to reverse until SW2 closes and stops.
3. When K2 is pressed during forward rotation, it will switch to reverse immediately. When K1 is pressed during reverse rotation, it will switch to forward rotation immediately.
1. What mode is P0
P0 is self-locking mode. For example, if the external forward switch (K1) is pressed, the motor will immediately rotate forward. At this time, the instant switch will be released and the motor will continue to rotate forward. It will not stop until the reverse signal (K2) or the forward stop signal (SW1) is encountered.
2. What are the requirements for the signal, can I connect the sensor
The signal is active low and can be a three-wire sensor (NPN-NO type). K1 K2 SW1 SW2 is still the specification.
3. What is the input and output voltage
The input voltage range of the TKS-M8 is 4V~40V, but to ensure reliable operation, it is recommended to use it within the range of 6V-36V. This module is wide voltage. The output motor is the same as the input voltage.
4. What is the limit signal
The limit signal can also be referred to as a stop signal. The limit signal is triggered and level enabled. For example, if a short limit signal is encountered during forward rotation, it will stop, even if the limit signal disappears, it will stop. You must re-transmit the signal once again to get forward again.
5. Can drive a large motor
The maximum current of the TKS-M8 at 12V is 20A, and the maximum current is 10A when the voltage is 24V. The maximum drive motor power is generally not more than 80W. It is recommended that the motor’s stall motor be the standard.
7. Can I achieve automatic forward and reverse
The TKS-M8 does not have a timing function, so strictly speaking, it cannot automatically reciprocate. However, with the start switch, the start switch (A), and the end switch (B), it is possible to achieve infinite reciprocating operation between the two points A and B. Connection method:The start switch and the start switch are connected to K1, the end switch is connected to K2, and SW1 SW2 is not connected. Note that all switches are normally open.
Package Included
1 x TKS-M8 P0 4-40V DC Motor Forward and Reverse Controller with Shell
Weight | 0.081 kg |
---|
Customers Also Viewed
3 in 1 Digital Camera Cleaning Set for DSLR for Canon for Nikon Camera Cleaning
$20.24Switch AccessoriesAdd to cartFeatures Cleaning Cloths– Extremely fine microfiber leaves zero scratches, streaks or marks. Safe for all surfaces and lenses. Lens cleaning pen – The soft brush retracts into the pen body to stay clean. Use the brush to dust off any particles and debris. Air Blower Cleaner – Direct a powerful stream of air to blow …
3 in 1 Digital Camera Cleaning Set for DSLR for Canon for Nikon Camera CleaningRead More
3V-9V DIY Shock Absorbed Smart Robot Tank Chassis Crawler Car Kit with 260 Motor
$52.64Smart Robot & Solar PanelAdd to cartNote:it is without shock absorbers and No damping wheelsSpecificationsMotor:260Votlage:3V-9VNet Weight:550gTrack Width:2.3cmSize:30cm*15cm*7.6cmNotes:This product without battery.Here is the GREEN version.Package Included1 x Smart Robot Tank Chassis Tracking Car
3pcs CJMCU-BME280 Embedded High Precision Atmospheric Pressure Altitude Sensor Module
$47.87Sensor & Detector ModuleAdd to cartFeatures– Package 2.5 mm x 2.5 mm x 0.93 mm metal lid LGA– Digital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)– Supply voltage VDD main supply voltage range:1.71 V to 3.6 V– VDDIO interface voltage range:1.2 V to 3.6 V– Current consumption:1.8 μA @ 1 Hz …
3pcs CJMCU-BME280 Embedded High Precision Atmospheric Pressure Altitude Sensor ModuleRead More
30Pcs Geekcreit Mini DC Adjustable Power Supply Buck Module Step Down Module
$28.42Power Supply ModuleAdd to cartDescriptionModule Properties:Non-isolated step-down module (BUCK)Rectification:Synchronous rectificationInput voltage:DC 4.75V-23VOutput voltage:DC 1.0V-17V (Adjustable, Output Output current:Rated current 1.8A (3A MAX, can not be prolonged)Output ripple:30mV (no-load)Dimension:17 x 11 x 4mm(L x W x H) / 0.67inch x 0.43inch x 0.16inch approxWeight:1g (per.)Package included30 x Mini DC-DC step-down adjustable module
20pcs 801S Vibration Shock Sensor Control Module Sensitivity Adjustable Board
$152.19Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Features1. having a signal output instruction;2. with a TTL level signal, and the analog output signal;3. the output valid signal is high, the light goes out;4. the sensitivity is adjustable (fine-tuning);5. wide …
20pcs 801S Vibration Shock Sensor Control Module Sensitivity Adjustable BoardRead More
RF And Microwave DC Bias DC Feeder Module 10-6000MHz
$15.30Other Module BoardAdd to cartUse1. RF power supply of active antenna2. The output of the broadband amplifier is straight3 communication data injected through the RF sideWorking parameters1. Frequency range:10 – 6000MHz2. Insertion loss:0.3dB@512MHz 0.45dB@1575MHz3. Maximum voltage:50V4. Maximum current:500mA5. RF connector:SMA-K (outer screw bore)6. System impedance:50 ohms7. Dimensions:33mmx33mm without connectorWiring1.DC:external DC power supply2.RF:RF signal port (this port can only transmit …
RF And Microwave DC Bias DC Feeder Module 10-6000MHzRead More
MMC E-ink Screen Digital thermometer Hygrometer Temperature Humidity Sensor from Ecosystem
$30.36Electrical Relay & TimersAdd to cartFeatures1. E-ink screen home hygrometer, data can be clearly read in various brightness and angle. 2. High sensitivity and accurate sensirion from Switzerland, sense subtle change of temperature and humidity a breath away.3. 3 locating methods, melt in every scenes as long as you need it.4. An expression to spell over comfort level, cute and …
MMC E-ink Screen Digital thermometer Hygrometer Temperature Humidity Sensor from EcosystemRead More
Reviews
There are no reviews yet.