QFRD-72 ON/OFF Relay Module infinite Cycle Time Adjustable Timer Relay
$10.92
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Voltage:AC 100V-250V, can be used for 100V/110V/120V/127V/220V/230V/240V mains.
Power consumption
Output:Active output with the same output voltage as the input voltage. Do not exceed 10A at most.
Life:100,000 movements
Input:Passive switch input, the green light will be on first after starting, and will stay in red after stopping.
Time range:0.5 seconds – 1000 minutes
Time accuracy:Range maximum * 0.001, ie 1000 resolution.
Input (start button):Passive switch input, the green light will be on first after starting, and will stay in red after stopping.
Function:With start/stop function, the module enters the infinite loop mode after starting, and the relay works on and off according to the set time.
Dimensions:length 88mm * width 38mm * height 22mm or less
Screw hole:center distance 83mm * 33mm, aperture 3.2mm
Terminal
–>N connected to the load N line, most appliances do not need to strictly distinguish the LN line
–>L1 is connected to the load L line, most appliances do not need to strictly distinguish the LN line
–> The normally closed end of the LNCL line output is generally not connected.
Instructions
Time can be set in both power-on and power-off states
1.ON duration setting
The potentiometer adjustment time under the RUN TIME flag is clockwise for increasing the length and counterclockwise for shortening the duration.
The left side of the dial switch on the potentiometer is the time range setting. The adjustment range of the adjustable resistor after dialing is 0-100; the range after dialing is 0-1000.
The right side of the dial switch on the potentiometer is the unit setting. Dial down to Sec. The unit is seconds; dial to Min. The unit is minutes.
2.OFF duration setting
The potentiometer adjustment time under the OFF TIME flag is clockwise for increasing the length and counterclockwise for shortening the duration.
The left side of the dial switch on the potentiometer is the time range setting. The adjustment range of the adjustable resistor after dialing is 0-100; the range after dialing is 0-1000.
The right side of the dial switch on the potentiometer is the unit setting. Dial down to Sec. The unit is seconds; dial to Min. The unit is minutes.
3. Start button
Connect to the self-reset button, press once to switch to the green light, indicating that the running state, the module will automatically work according to the set running time and stop time, infinite loop. At this point, press the start button again, the module will switch to red light, indicating that it is in a stopped state.
4. Example of time setting
Demand:20 seconds on, 30 minutes off, infinite loop.
Settings
(1). Set the running time range to 0-100;
(2). Dial the running time unit to the second;
(3). Rotate the running time potentiometer to the 20 position, which is 20/100 from the left;
(4). Set the stop time range to 0-100;
(5). Dial the stop time unit to the minute;
(6). Rotate the stop time potentiometer to the 30 position, that is, the position from the left 30/100;
Note:The position of the potentiometer can also be quickly located by measuring the voltage. The center arm is adjusted to a minimum of 0V and the highest position is 5V. For example, you need to adjust to 20, that is, 20/100*5V=1.0V; to adjust to 30, then 30/100*5V=1.5V
Applications
It is used for reciprocating stroke control, or repeated power-off of equipment and product aging test.
Warmly Noted
1. The start button can be used with a current of 0.1A or more.
2. The button output line is equipped with strong electricity. When installing, be sure to meet the creepage distance requirements to prevent personal contact with the charged body.
3. It is not necessary to start the input. You can short the two terminals with wires, so that the power will start to run infinitely without buttons.
Package Included
1 x QFRD-72 ON/OFF Relay Module Infinite Cycle Time Adjustable
Weight | 0.04 kg |
---|
Customers Also Viewed
380W 48V/60V Deep Well Pump 1.2m/h Stainless Steel Submersible Pump Deep for industrial Home Use
$226.79Electrical Pump & ValveAdd to cartFeatures– Pure copper motor– Stainless steel body– Safety insulation, strong power– High precision seal– Good mute effect– Suitable for using in ships, fishing boats, fish ponds, agricultural irrigation and etc.– This is a non-toxic, non-polluting, noiseless solar water pump– The pump has a built-in controller and is easy to install. It can connect the pump …
3Pcs PL2303TA USB To TTL RS232 Upgrade Module USB To Serial Port Download Cable
$16.52Electronic Accessories & SuppliesAdd to cart3Pcs PL2303TA USB To TTL RS232 Upgrade Module USB To Serial Port Download CableDescriptionThis is a new product design produced by PL2303TAChips. PL2303TA provides aRS232 like a full-duplex asynchronous serial devices to connect to any Universal Serial Bus (USB) Host to a convenient solution.PL2303TA perfectly compatible win XP/ VISTA / 7/8 / 8.1 System can …
3Pcs PL2303TA USB To TTL RS232 Upgrade Module USB To Serial Port Download CableRead More
3pcs Blue Silicone Protective Enclosure Cover for Motherboard Type A Cat Model
$13.92Other Module BoardAdd to cartProduct IntroductionThe cover case has dedicated holes position for corresponding function; do not affect the operation of micro:bit development board; do not affect the power access; do not affect the dot matrix display.The cute shape allows you to use micro:bit more fun.Size:58*47*12mmColor:BlueNote:The module board does not includes.Package includes3 x Silicone Protective Enclosure
2Pcs Left Type 36*19mm Silver Shock Absorption Wheels with M4 Screws for Smart Robot
$27.34Smart Robot & Solar PanelAdd to cartSpecifications– Wheel size:36*19mm– Color:Silver– Material:Aluminum Alloy– With bearing– Screw Nut Size:M4 Package Included2 x Silver Left Type Shock Absorption Wheel with Screws & Bearings
10pcs CJMCU-2662 LM2662 1.5-5.5V 400mA Negative Polarity inversion Capacitor Switch Board Negative Voltage Converter Power Supply Module
$36.32Sensor & Detector ModuleAdd to cartFeatures1. Polarity inversion module, for the same positive voltage into a negative voltage. To provide for the op amp negative supply and negative reference.Enter a positive voltage, a negative voltage output.2. Maximum current 200mA, enough to supply the op amp negative supply, negative reference and other needs.3. The charge pump circuit is simple, small size, …
250pcs Waterproof Soldering Ring Heat Shrinkable Medium Nozzle Terminal Solder Connectors
$36.44ConnectorsAdd to cartFeatures Simple one-step connection for wire, welding, insulation and sealing. Can be perfectly used in marine and automotive applications. The outside is a polyolefin tube and the inside is a hot melt adhesive. Welding and sealing and advanced waterproof function. Waterproof copper welding head can prevent wire corrosion. Polyolefin heat shrinkable butt connector can improve …
250pcs Waterproof Soldering Ring Heat Shrinkable Medium Nozzle Terminal Solder ConnectorsRead More
20pcs 16 Keys Capacitive Touch Key Pad Module RobotDyn for Arduino – products that work with official for Arduino boards
$163.70Sensor & Detector ModuleAdd to cartFeatureThis is a touch keypad function by measuring the capacitance of 16 electrode points.This compact inexpensive keypad can be connecting to any Capacitive module. In our catalog, you can find 16 Keys Capacitive touch modules which bases on TTP229 and connecting to the microcontroller with the I2C bus.This touch keypad is both an ideal learning …
Reviews
There are no reviews yet.