QFRD-72 ON/OFF Relay Module infinite Cycle Time Adjustable Timer Relay
$10.92
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Voltage:AC 100V-250V, can be used for 100V/110V/120V/127V/220V/230V/240V mains.
Power consumption
Output:Active output with the same output voltage as the input voltage. Do not exceed 10A at most.
Life:100,000 movements
Input:Passive switch input, the green light will be on first after starting, and will stay in red after stopping.
Time range:0.5 seconds – 1000 minutes
Time accuracy:Range maximum * 0.001, ie 1000 resolution.
Input (start button):Passive switch input, the green light will be on first after starting, and will stay in red after stopping.
Function:With start/stop function, the module enters the infinite loop mode after starting, and the relay works on and off according to the set time.
Dimensions:length 88mm * width 38mm * height 22mm or less
Screw hole:center distance 83mm * 33mm, aperture 3.2mm
Terminal
–>N connected to the load N line, most appliances do not need to strictly distinguish the LN line
–>L1 is connected to the load L line, most appliances do not need to strictly distinguish the LN line
–> The normally closed end of the LNCL line output is generally not connected.
Instructions
Time can be set in both power-on and power-off states
1.ON duration setting
The potentiometer adjustment time under the RUN TIME flag is clockwise for increasing the length and counterclockwise for shortening the duration.
The left side of the dial switch on the potentiometer is the time range setting. The adjustment range of the adjustable resistor after dialing is 0-100; the range after dialing is 0-1000.
The right side of the dial switch on the potentiometer is the unit setting. Dial down to Sec. The unit is seconds; dial to Min. The unit is minutes.
2.OFF duration setting
The potentiometer adjustment time under the OFF TIME flag is clockwise for increasing the length and counterclockwise for shortening the duration.
The left side of the dial switch on the potentiometer is the time range setting. The adjustment range of the adjustable resistor after dialing is 0-100; the range after dialing is 0-1000.
The right side of the dial switch on the potentiometer is the unit setting. Dial down to Sec. The unit is seconds; dial to Min. The unit is minutes.
3. Start button
Connect to the self-reset button, press once to switch to the green light, indicating that the running state, the module will automatically work according to the set running time and stop time, infinite loop. At this point, press the start button again, the module will switch to red light, indicating that it is in a stopped state.
4. Example of time setting
Demand:20 seconds on, 30 minutes off, infinite loop.
Settings
(1). Set the running time range to 0-100;
(2). Dial the running time unit to the second;
(3). Rotate the running time potentiometer to the 20 position, which is 20/100 from the left;
(4). Set the stop time range to 0-100;
(5). Dial the stop time unit to the minute;
(6). Rotate the stop time potentiometer to the 30 position, that is, the position from the left 30/100;
Note:The position of the potentiometer can also be quickly located by measuring the voltage. The center arm is adjusted to a minimum of 0V and the highest position is 5V. For example, you need to adjust to 20, that is, 20/100*5V=1.0V; to adjust to 30, then 30/100*5V=1.5V
Applications
It is used for reciprocating stroke control, or repeated power-off of equipment and product aging test.
Warmly Noted
1. The start button can be used with a current of 0.1A or more.
2. The button output line is equipped with strong electricity. When installing, be sure to meet the creepage distance requirements to prevent personal contact with the charged body.
3. It is not necessary to start the input. You can short the two terminals with wires, so that the power will start to run infinitely without buttons.
Package Included
1 x QFRD-72 ON/OFF Relay Module Infinite Cycle Time Adjustable
Weight | 0.04 kg |
---|
Customers Also Viewed
150W 18V Mono Solar Panel Dual USB 12V/5V DC Monocrystalline Solar Charger for Car RV Boat Battery Charger Waterproof
$164.01Solar PanelAdd to cart150W 18V Mono Solar Panel Dual USB 12V/5V DC Monocrystalline Flexible Solar Charger For Car RV Boat Battery ChargerFeatures1.Equipped with 12V DC5.5×2.1 & 5V USB output interface.2.Dedicated for 12V battery and 5V device charging.3.EVA+PET at front panel, flexible, light-weight but durable.4.Mono-crystalline solar Cell with efficient up to 21%.5.4x eyelet and free 2x carabiners for mounting …
DIY 5×7 Prototype Paper PCB Universal Experiment Matrix Circuit Board
$4.36Module ComponentsAdd to cartDescriptionMaterial:Single Side Copper PCB.Hole Dia:about 1mm.Hole pitch:standard 2.54mm.For point to point DIY soldering.Size:5cm x 7cm – 1.97inch x 2.76inch.Quantity:1PCPackage Included1 x PCB Board
FR4 300x200mm Double Side Copper Clad Laminate PCB Board Fiberboard CCL
$17.48Other Module BoardAdd to cartFR4 300x200mm Double Side Copper Clad Laminate PCB Board Fiberboard CCLSpecificationPanel Size:Approx. 300mm x 200mm or 11.8inch x 7.88inch (inch)Thickness:0.06inch ±0.005 (1.5mm ± 0.15)Weight:Approx. 194g eachLayers:Double SidePanel:FR4Operating temperature:Up to 140 °C or 285°FDescriptionThis Double PCB Copper Clad Laminate Board is made of copper foil by the hot-pressing technology.Super-fine steel-wool, Restore4, Tarn-X, roscherite, Zap or similar …
FR4 300x200mm Double Side Copper Clad Laminate PCB Board Fiberboard CCLRead More
10pcs DC Jack Power 7~12V to DC5V/3.3V Step Down Converter Voltage Regulator Power Supply Module for Breadboad OPEN-SMART for Arduino – products that work with official for Arduino boards
$34.43Power Supply ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionThis is a mini LDO step-down power module based on AMS1117-5.0 and AMS1117-3.3, and it output fixed 5V / 3.3V.It is a small size, lightweight, especially for model airplanes, smart cars, DIY …
60A DC Brush Motor Speed Controller forward Reverse PWM Control Pulse Width Speed Digital Display 10-55V/3KW
$69.50Motor PWM Speed ControllerAdd to cartThe main purpose1. All kinds of general-purpose DC brush motor speed control2. Various types of automotive motor speed control (automobile cooling fan speed control, car fan speed control, car wiper motor speed control, car air conditioning fan speed control)3. Production line conveyor speed control, pipeline exhaust fan speed regulation, treadmill speed regulation, multiple computer fan …
24Value 500Pcs 0.1uF-1000uF Electrolytic Capacitors + 10Value 600 Pcs 0.1uF-10uF Ceramic Capacitor Assortment Box Kit
$32.79Module ComponentsAdd to cartProduct FeaturesThe nice sturdy box helps you keep all caps in order.Assortment Box for easy access.All of the capacitor is marked the value,easy to find what you need.High quality and long life. Package Included1 x 10Value 600pcs Ceramic Capacitor1 x 24Value 500pcs Electrolytic Capacitor
5Pcs KY-015 DHT11 Temperature Humidity Sensor Module
$17.16Sensor & Detector ModuleAdd to cart5Pcs KY-015 DHT11 Temperature Humidity Sensor Module ForDescriptionThe sensor module is including resistive humidity sensing component and NTC temperature testingThe compatible digital temperature humidity sensor module is component and connected with 8-byte MCUGreat anti-interference ability and durableWith fixed bolt hole for easy installation3 DO small plate switch digital output interface connected microcontroller IO portTwo module …
5Pcs KY-015 DHT11 Temperature Humidity Sensor ModuleRead More
100pcs 270uF 16V 8x8mm Low ESR 16V270uF for Motherboard VGA Solid Capacitor
$29.08Electronic Accessories & SuppliesAdd to cartDescriptionLow ESR, high ripple current capabilityESR 5mΩ max (2 to 4VDC)Longer life(20000 hours at 106 Celsius)Rated voltage:2 to 16VDCCategory temperature:-55 to +105 CelsiusTolerance:+/-20%(M)Package included100 x Solid Capacitors
Reviews
There are no reviews yet.