JK11S-100S-5V 10A 0-100S Adjustable ON-OFFf Delay Module Timer Cycle Switch infinite Loop Relay Module
$8.73
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Voltage:5V DC
Quiescent current:8mA
Operating current:95mA
Trigger:passive switch trigger, response time is 0.03 seconds (the trigger terminal can not access the active signal)
Minimum on-off time:0.2 seconds
Load capacity:10A
Output form:normally open + normally closed
Size:70*20*19mm
Features
– Using industrial-grade single-chip microcomputer to control time, high precision and stable performance;
– Two adjustable resistors are used to adjust the time, and the connection duration and the disconnection time can be independently adjusted;
– The external contact is activated, and the timing is started by shorting the self-reset button. It is also possible to start the countdown by shorting the triggers together to achieve power-on;
– The time range is divided into 0-100 seconds.
Basic working principle
Taking the factory standard setting as an example, the red LED will light when the power is turned on, and the relay is in the off state. When shorted at the trigger end, the module green light is on and immediately enters the working state. Triggering again in the working state will stop working.
In the working state, the relay will pass T1 seconds, break T2 seconds, pass T1 seconds, break T2 seconds… infinite loop. T1 T2 is the length of time the user adjusts with an adjustable resistor.
Instructions
– Power access
The module is connected to the power supply according to the correct power supply voltage and polarity. The red line of the power supply terminal is positive and the black line is negative.
– Trigger line access
The two white lines of the trigger end are connected to a switch, and the module can be started by tapping the switch, and then the switch is stopped by tapping the switch. The trigger switch can be a tact switch, a micro switch, an optocoupler C-E terminal, a relay contact, and the like.
– Normal speed and quick mode settings
The OP1 jumper is used to select normal speed and fast mode, and the shipment defaults to normal speed.
– Loop mode and single mode settings
The OP2 jumper is used to select the loop mode and the single mode, and the shipment defaults to the loop mode.
Cycle mode:After starting, the relay is on-off-on-off-disconnect…, and it is cycled according to the set duration;
Single trigger:After starting, the relay is turned on, and the relay is turned off after T1 duration. (After disconnection, the action ends and waits for trigger again)
Precautions
1. The module power supply is not protected against reverse protection, because it is important to remember that the power supply cannot be connected.
2. The trigger terminal can only be connected to the passive switch, not to the voltage signal. Doing so can damage the module.
3. When the resistance load is connected, no special treatment is needed; when the capacitive load is connected, the relay module is easily damaged by electricity. It is recommended to use the AC contactor derated or the contact current of the motor should be considered within 10A.
Package Included
1 x JK11S-5V 100S Delay Adjustable Multi-function Relay Module
Weight | 0.019 kg |
---|
Customers Also Viewed
Geekcreit DIY C51 RGB Colorful Crystal LED Aurora Colorful Flashing Light Kit
$19.67DIY Electronic KitsAdd to cartFeaturesPower supply:3xAA batteries1. 14 new Aurora gradient modes2. LED color speed changing by different brightness3. All DIP components, suitable for beginners too4. Power-on automatic switch display modesPlease not this is a DIY kit. Easy to assemble.More effects please see this videoPackage included1 x Aurora RGBLED Seven Colorful Light(batteries are not included)
5pcs 2.8 inch TFT LCD Shield Touch Screen Module with Touch Pen for UNO R3/Nano/Mega2560 OPEN-SMART for Arduino – products that work with official for Arduino boards
$72.74Display ScreenAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionThis is a 2.8 inch TFT LCD expansion board. This display has a controller built into it with RAM buffer so that almost all work is done by the TFT. It leads …
0-9999.9 Variable Resistor Substitution Box Ohm Adjustable Substitution Resistance Knob Switch Precision Physical Experiment
$54.66PhysicsAdd to cartDescriptionThis Resistor Substitution Box with Adjustable Knob Switch Used for Precision Measuring ResistanceSpecificationMaterial:PlasticColor:BlackDimension:140*100*50mmOperating Temperature:0-40℃Relative Humidity:25%-80%Reference Power:0.5WRated Power:1WAdjustable Range:0-9999.9ΩFeatures1.Convenient instrument in determining the desired resistance values in circuits under design or test.2.Wide application in lab physical experiment for its accurate reading.3.Better use knob switch designed according to your needs, 0 to 9999.9Ω variable resistance, 5 switchable …
5pcs LilyPad Tri-Color LED RGB Module LilyPad LED Board Tri-color Module
$7.60LED BoardAdd to cartDescriptionBlink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can create any color. Very bright output. This is a common anode design – to turn on a channel you simply need to ground one of the R/G/B pins to illuminate …
5pcs LilyPad Tri-Color LED RGB Module LilyPad LED Board Tri-color ModuleRead More
DALY BMS 4S 12V 300A 400A 500A18650 Lithium Battery Protection Board Bluetooth 485 to USB Device NTC UART Togther Lion LiFePO4 LTO Battery with Fan
$12.14Battery Protection ModuleAdd to cartType 300A com UART BT / Type 300A com 485 / Type 400A com UART BT / Type 400A com 485 / Type 500A com UART BT / Type 500A com 485 / Type USB to RS485 Cable / Type USB to UART Cable / Type Bluetooth module / Type BMS touch control screen /
20pcs CJMCU-5102 PCM5102A Stereo Digital To Analog Converter DAC PLL Voice Module
$187.54Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionBrand:CJMCUPCM5102A Stereo DAC Digital To Analog Converter PLL Voice ModuleMore infos:!Package included20 x CJMCU-5102 Stereo DAC Digital To Analog Converter PLL Voice Module
580pcs 2.8mm 2/3/4/6 Pin Motorcycle Automotive Electrical Wire Terminal Male Female Cable Connector Plug Kits
$26.31Electronic Accessories & SuppliesAdd to cartFeatures-Can be used to connect internal wiring.-Can be used on car, moped, quad bike, tricycle,caravan,motorcycle, ATV, scooter, boat, snowmobile etc.-2.8mm terminal for cable diameter up to 2.0mm-2/3/4/6 way connector with fixed hook580pcs Package IncludedHousing Female & Male Connector 100pcs2-hole:20pcs10x7021A-2.8-1110x7021A-2.8-213-hole:20pcs10x7031A-2.8-1110x7031A-2.8-214-hole:20pcs10x7041A-2.8-1110x7041A-2.8-216-hole:20pcs10x7061A-2.8-1110x7061A-2.8-219-hole:20pcs10x7091A-2.8-1110x7091A-2.8-21Male Bare Terminals 240 pinsFemale Bare Terminals 240 holes
4D Vision Human Ear Anatomy Model Anatomical Learn Study Equipment
$66.81MathematicsAdd to cartSpecificationsMaterial:PlasticColor:As the picture showsModel size:106*59*90mm(L*W*H)Features– The model consists of 22 different pieces, a stand, and an assembly guide.– It’s a great challenge to put them together, you will be satisfied when finished.– Ever wonder what the inside of your Ear looks like – Learn all about it with this 4 dimensional model.– This ear model …
4D Vision Human Ear Anatomy Model Anatomical Learn Study EquipmentRead More
Reviews
There are no reviews yet.