JK11S-100S-5V 10A 0-100S Adjustable ON-OFFf Delay Module Timer Cycle Switch infinite Loop Relay Module
$8.73
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Voltage:5V DC
Quiescent current:8mA
Operating current:95mA
Trigger:passive switch trigger, response time is 0.03 seconds (the trigger terminal can not access the active signal)
Minimum on-off time:0.2 seconds
Load capacity:10A
Output form:normally open + normally closed
Size:70*20*19mm
Features
– Using industrial-grade single-chip microcomputer to control time, high precision and stable performance;
– Two adjustable resistors are used to adjust the time, and the connection duration and the disconnection time can be independently adjusted;
– The external contact is activated, and the timing is started by shorting the self-reset button. It is also possible to start the countdown by shorting the triggers together to achieve power-on;
– The time range is divided into 0-100 seconds.
Basic working principle
Taking the factory standard setting as an example, the red LED will light when the power is turned on, and the relay is in the off state. When shorted at the trigger end, the module green light is on and immediately enters the working state. Triggering again in the working state will stop working.
In the working state, the relay will pass T1 seconds, break T2 seconds, pass T1 seconds, break T2 seconds… infinite loop. T1 T2 is the length of time the user adjusts with an adjustable resistor.
Instructions
– Power access
The module is connected to the power supply according to the correct power supply voltage and polarity. The red line of the power supply terminal is positive and the black line is negative.
– Trigger line access
The two white lines of the trigger end are connected to a switch, and the module can be started by tapping the switch, and then the switch is stopped by tapping the switch. The trigger switch can be a tact switch, a micro switch, an optocoupler C-E terminal, a relay contact, and the like.
– Normal speed and quick mode settings
The OP1 jumper is used to select normal speed and fast mode, and the shipment defaults to normal speed.
– Loop mode and single mode settings
The OP2 jumper is used to select the loop mode and the single mode, and the shipment defaults to the loop mode.
Cycle mode:After starting, the relay is on-off-on-off-disconnect…, and it is cycled according to the set duration;
Single trigger:After starting, the relay is turned on, and the relay is turned off after T1 duration. (After disconnection, the action ends and waits for trigger again)
Precautions
1. The module power supply is not protected against reverse protection, because it is important to remember that the power supply cannot be connected.
2. The trigger terminal can only be connected to the passive switch, not to the voltage signal. Doing so can damage the module.
3. When the resistance load is connected, no special treatment is needed; when the capacitive load is connected, the relay module is easily damaged by electricity. It is recommended to use the AC contactor derated or the contact current of the motor should be considered within 10A.
Package Included
1 x JK11S-5V 100S Delay Adjustable Multi-function Relay Module
Weight | 0.019 kg |
---|
Customers Also Viewed
Swimming Pool Net Leaf Clear Skimmer Net Deep Rake Cleaner Spa Scoop Shovel Tool
$56.69Mesh & Wire ClothAdd to cartSpecificationsColor:White+blueMaterial:ABSSize:49×31.5cm / 19×12′Deepth of net:52cm / 20′Fits for:Extension poles of the diameter of 3cm/1.2′Feature– Making cleaning and maintaining the pool simple, fast, and convenient, for safe and sanitary.– Spring-loaded locking clips on the handle to attach extension poles.– Deep bag and fine-mesh are great for grabbing dirt and small debris from the pool bottom.– Made …
Swimming Pool Net Leaf Clear Skimmer Net Deep Rake Cleaner Spa Scoop Shovel ToolRead More
18650 Battery Box Rechargeable Battery Holder Board with Switch for 2×18650 Batteries DIY kit Case
$4.36Other Module BoardAdd to cartSpecificationsNumber of sections:2Uses:for 18650 battery (without battery)With switch:YesSize:42*22*90mmCable:15cmPackage Included1 x 18650 Battery Box Rechargeable Battery Holder
25A 125V/250V AC 50/60Hz Generator Overcurrent Overload Protector thermal Circuit Breaker
$18.21Switch AccessoriesAdd to cartSpecificationsName:Overload ProtectorBrand:KUOYUHRated current:25ARated Voltage:125/250V AC, 32V DC, 50-60HZBreak capacity:1000A x 125V AC, 200A x 250V ACPressure ability:1500V AC for 1 minute, the leakage current is less than 0.5mAMinimum Voltage:less than 0.25VReset time:within 60 secondInsulation resistance:500V DC continuous for 5S, the insulation resistance will be more than 100MΩWeight:35gCertificate:UL,CSA,VDE, RoHSFeatures– When the load exceeds the rated current, …
25A 125V/250V AC 50/60Hz Generator Overcurrent Overload Protector thermal Circuit BreakerRead More
Quick Charge 3.0 DIY Power Bank 18650 Battery Case QC3.0 5V 9V 12V DIY Kit Power Bank 2A 18650 Battery Fast Charger Shell
$25.14Module ComponentsAdd to cartNote1. Please Use flat-headed 18650 DIY2. If use the old battery,pls test the voltage,more than 3.5v and the Internal resistance less than 60 .3. It can’t use the flashlight 18650 battery4. Do not connect the positive and negative terminals backwards, otherwise it will burn the circuit board5. Don’t close the cover until the test is …
3pcs 433MHZ ASK Wireless Transmission Module TX11 High Power Module infinite Emission Circuit Board
$6.87Smart ModuleAdd to cartFeatures(1) The transmission power is large, and the transmission power is greater than 30 mW;(2) Wide operating voltage, 2.5V-9V;(3) Operating frequency:433.92 MHz(4) Using SAW frequency stabilization (+-75KHZ), the working frequency is stable;(5) With the RXB8 receiving module, the distance can reach 800 meters;(6) Static power consumption Low emission is current consumption:10mA, there is basically no …
Mini-Whip MF/HF/VHF SDR Antenna Miniwhip Shortwave Active Antenna for Ore V6N7
$56.85Motherboard & Development BoardAdd to cartDescriptionAccessory Type:USB To DC CableCompatible With:HackRF RTL-SDRColor:greenMaterial:metal + pcProduct DescriptionEffective bandMedium waveShortwaveUltrashort waveApplicable environmentIndoorOutdoorVoltage range:9V-15VPackage includes2 x Antenna2 x Module1 x Power cable
5pcs W1701 12V DC Digital Temperature Controller Switch thermostat Adjustable thermostat Temperature Switch Cooling Controller
$41.51Sensor & Detector ModuleAdd to cartSpecificationModel:W1701Size:Approx. 36.5×36.5×18 mm/1.44×1.44×0.71 inchInstallation screw:M3 * 2 diagonal size 39.5mmTemperature range:20-90 °Control Mode:Heating, Cooling, Heat dissipationControl Accuracy:0.1 °Hysteresis Setting:1-10 °Refresh Rate:0.5SSupply Voltage:DC 12VOutput Voltage:DC 12VOutput Power:Max 200WStatic Current:≤ 3MA, attract current ≤ 60MATemperature Probe:10K thermistorB25 = 10K 395030cm Waterproof SensorEnvironmental Requirements:-10 ~ 60 °Humidity 20% -85%Can be used in the (liquid, mold, space) and other …
Reviews
There are no reviews yet.