QF-RD21 5V Power-off Delay Disconnect Relay Module Timer Delay Switch Module
$10.92
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Voltage:5V DC (±1.5V)
Power consumption
Output:Passive output (ie dry contact), relay set of normally open + normally closed output. Do not exceed 10A at most.
Time range:(4 files, selected by switch)
First gear:range 0.2 seconds-30 seconds, accuracy:0.1 seconds
Second gear:range 0.2 seconds – 300 seconds (5 minutes), accuracy:0.3 seconds
Third gear:range 0.2 seconds-30 minutes, accuracy:1.8 seconds
Four gears:range 0.2 seconds – 300 minutes (5 hours), accuracy:18 seconds
Input:Voltage signal, above 1.5V is the effective signal, the current needs at least 0.1mA.
Dimensions:length 70mm * width 25mm * height 20mm
Screw hole:center distance 64.5, aperture 3.0mm
Wiring
V+ module DC powered positive
GND The DC supply of the module is also the reference GND of the signal voltage.
IN signal voltage input, low level below 1V, high level above 1.5V, uncertain in the middle. Up to 30V
Normally open contact of the NO relay
Constant contact of NC relay
COM relay contact common
Instructions
Time range setting
– When the selector switch is placed in the 30 position, it means 0-30 adjustable
– When the selector switch is placed at position 300, it indicates that 0-300 is adjustable.
Adjustment of time value
– Adjustable resistance rotates counterclockwise to the direction of the number to reduce the time, clockwise to the + direction increases the time
Time unit setting
– When the selector switch is placed in the Sec position, the unit is:second
– When the selector switch is placed in the Min position, the unit is:minute
Example
Request a delay of 50 minutes
1. The range is placed at 300 position
2. The time unit is placed in the Min position.
3. Adjust the adjustable resistance to 50 position, adjust to 300, so adjust to 1/5 is 50.
Note:The potentiometer adjustment can also be quickly adjusted with the multimeter voltage file. For example, the range is 30, and it needs to be adjusted to 12, then the voltage can be adjusted to 2.
t=Ut/5*30=2.0V / 5.0V * 30 =12
Ut is the voltage measured by the multimeter, 30 is the range selected by the selector switch, and can also be selected to 300.
Applications
Combined with the travel switch and the inductive switch
1. Timeout automatically closes the door
2. Pipeline product flow monitoring
3. Current flow monitoring such as water flow
4. Other uses
Package Included
1 x QF-RD21 5V Power-off Delay Disconnect Relay Module Timer Delay Switch
Weight | 0.04 kg |
---|
Customers Also Viewed
WQ-BX-S2 Water Filter Activated Carbon Cartridge Replacement Refrigerator Filter for SAMSUNG
$52.64Switch AccessoriesAdd to cartSpecificationsMaterial:PC+Activated CarbonMin.Working pressure:207 kPa/30 psiMax.working pressure:689 kPa/100 psiMin.operating temperature:0.6°C/33°FMax.operating temperature:38°C/100°FRated service flow:0.5gpm(1.89L/min)Rated capacity:300 gallons(1136 liters)Features-Replace the filter every 6 months.-Made of coconut shell carbon fiber and PC,nice quality and filter performance.-Help to filter water,reduce residual chlorine and peculiar smell,which makes water taste better.-The refrigerator water filter have been tested and certified by NSF International against …
ESP32 OLED Module ESP32 OLED WiFi + bluetooth Dual ESP-32 ESP-32S ESP8266
$26.23Smart ModuleAdd to cartDescriptionESP32 is already integrated with antenna and RF balun, power amplifier, low noise amplifiers, filters, and the power management module.The entire solution is the least amount of PCB area. this board is 2.4 GHz dual mode WiFi and bluetooth chips by tsmc 40nm low power technology, power and optimized RF characteristics, which is safe, reliable, …
ESP32 OLED Module ESP32 OLED WiFi + bluetooth Dual ESP-32 ESP-32S ESP8266Read More
DIY Holographic Projection Building Block Virtual Imaging Blocks Toys
$19.97PhysicsAdd to cartName:DIY Holographic Projection Building Block Virtual ImagingModel:JY-WIZT00300SpecificationNet weight:189.4gPackaging size:395*285*5mmComposite finished product size:140*140*55mmColour:Log colourMaterial:WoodFeatures– Training of Practical Ability– Types of Science and Education:Physics– Intelligence trainingNote1. Because there may be slight deviation in manual measurement, please refer to the actual object.2. The picture is the finished product after installation and the shipment is the installation material package.3. …
DIY Holographic Projection Building Block Virtual Imaging Blocks ToysRead More
Laser Protective Goggles Glasses 405nm 445nm 650nm Red Blue Blue-violet Laser Eye Protection Safety
$26.31Laser Safety GlassesAdd to cartSpecificationName:Laser Protective GogglesMaterial:PlasticOptical Density (OD):OD4+Typical Laser Wavelength:650nm, 445nm, 405nmFeatures– Good protective performance, can filter 80% strong laser light.– Perfect for laser protection of 650nm red laser, 445nm blue laser, 405nm blue-violet laser.– Offer effective protection for your eyes in laser engraving operation.Package Included1 x Laser Protective Goggles1 x Storage Pouch
5Pcs Rain Sensor Water Level Measure Module Raindrop Analog Sensor Board
$12.88Sensor & Detector ModuleAdd to cartParameterWorking voltage:DC 5VWorking current:less than 35MAType:Analog SensorTest area:40 mm x 18 mmOperating temperature:10 → to 30 →Working humidity:10% – 90% No condensationFixing hole size:Φ3mmProduct size:60mm x 22mmApplicable occasions:Design of water level alarmFeatures:Simple, easy to use, small size, light, cost-effectivePackage includes5 x Rain Sensor
3pcs 36*IR LED Board for CCTV Camera Night Vision 60mm for CS LEN infrared Light Board DC12V
$12.06LED BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Description– Infrared IR LED boards for CCTV cameras night vision.– Power supply exceeds DC13V may greatly reduce the LEDs operating life.SpecificationsLED Number:36PCSBoard Diameter:60 mm (outside) / 34mm (inside)Power Supply:DC12V / 220mA (typical)Operation …
3pcs Low 3.5ohm PCA9306 Dual Bidirectional Voltage-Level Conversion Module Converter
$27.46Sensor & Detector ModuleAdd to cartDescriptionThis is a conversion board for the PCA9306 dual bidirectional voltage-level translator. Because different parts sometimes use different voltage levels to communicate, voltage level translators can be the key to making different parts play nice.The PCA9306 is a dual bidirectional I2C-bus and SMBus voltage-level translator that’s operational on the low side from 1.0 V to …
3pcs Low 3.5ohm PCA9306 Dual Bidirectional Voltage-Level Conversion Module ConverterRead More
Reviews
There are no reviews yet.