3pcs XH-W1321 0.1 Digital thermostat Mini Embedded Red Digital Display Switch Temperature Controller with Waterproof NTC Sensor Meter
$30.89
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Product Name:Miniature embedded digital display thermostat
Product Model:XH-1321
Material:ABS
Case Color:White
LED Color:Red
Input Voltage:DC12V
Temperature Measurement Range:-50-110→
Temperature Control Range:-50-110→
Control Accuracy:0.1→
Display Accuracy:0.1→
Measuring Input:NTC10K Waterproof Probe L=1 Meter
Output Type:Relay Output(Output Switch)
Output Capacity:10A
Size (Length x Width x Height):about 56 x 38 x 32mm (2.17 x 1.50 x 1.26 Inch )
Opening hole size:46 x 34mm
Key Function
SET:Press once during normal use, directly enter the stop temperature setting state, use the up and down keys to set the required stop temperature, long press to enter the internal setting menu.
UP:After long press the setting button to enter the internal setting, increase the value setting by the up button.
DOWN:After long press the setting button to enter the internal setting, use the up button to decrease the value setting.
Code:Description:Setting range (method):Factory settings
P0:Operating mode:H/C:C
P1:Backlash setting:0.1-50:2
P2:Temperature correction:-9.9~+9.9°C:0
P3:Delayed start:0-9:0
Detailed Code Descriptions
P0:Working mode:This value must be set when the thermostat is used for the first time. If it is used for heating heating, set to H, if it is used for cooling cooling, set to C.
P1:Hypothesis setting:Press and hold the setting button for 3 seconds to enter the internal menu, select P1, and press the setting button again to enter the hysteresis value setting state. The hysteresis is the difference required when the thermostat reaches the set temperature and stops working again. For example, it is set to the heating mode. When it is heated to 40 degrees, it stops at 35 degrees and starts to return. The difference is 5
P2:Temperature correction:Press and hold the setting button for 3 seconds to enter the internal menu. Press the up and down keys to select P2, press the setting button again, and set the required calibration temperature by the up and down keys. In the setting, if the detected temperature value is 0.5 °C larger than the actual temperature value, the calibration temperature to be set is -0.5 °C. If the detected temperature value is 1 °C smaller than the actual temperature value, the calibration temperature to be set is 1 °C, and the detection temperature +-calibration temperature = actual temperature.
P3:Delay start:Press and hold the setting button for 3 seconds to enter the internal menu, select P3 by the up and down keys, press the setting button again, and set the required delay time (minutes) by the up and down keys. The delay start is generally used for compressor refrigeration. If it is used in the refrigerator freezer, this value needs to be set. According to the compressor back pressure, the set value is usually 3-6 minutes, if it is not used to control the compressor or no delay. Function, skip this item directly.
Instructions
Set the difference back:Why set the backlash setting When you control the device, the temperature will rise or fall back. How many degrees does the temperature change If you want the temperature to change by 10°, the device needs to set the difference back to 10. By setting the difference back, the device can cycle through the temperature range.
Set the stop temperature:press the set button once in the normal display state to stop the temperature value flashing. You can set the desired stop temperature value by using the up and down keys.
How to set factory settings are restored:Press and hold the up and down keys while the power is on, the digital tube display 888 will then automatically jump to the detection temperature.
Heating mode setting method
Setup steps
The first step is to set P0=H
The second step sets the stop temperature
The third step sets the hysteresis value
Setting method
1. Press and hold the setting button to enter the internal menu and set P0 to H.
2. Press the setting button to stop the temperature flashing, and the up and down keys to set the temperature.
3. Press and hold the setting button to enter the internal menu and set the P1 hysteresis setting.
Use Cases
Control the water heater, heat it to 65 ° C to stop, the temperature drops back to 50 ° C and start heating again, how to set
Step 1:Determine the working mode as heating mode and set P0 to H
Step 2:Press the setting button to stop the temperature flashing. Set the starting temperature to 50 °C with the up and down keys.
The third step:stop at 65 °C, start again at 50 °C, so the return difference needs to be set to 65-50=15, enter the internal menu and set P1 to 15, the heating case is set!
Cooling mode setting mode
Setup steps
The first step is to set P0=C
The second step sets the stop temperature
The third step sets the hysteresis value
Setting method
Press and hold the setting button to enter the internal menu and set P0 to C.
Press the setting button to stop the temperature flashing, and the up and down keys to set the temperature.
Long press the setting button to enter the internal menu, set the P1 backlash setting
Use Cases
Control the farm, ventilate to 26 ° C to stop, the temperature rises to 28 ° C to start the refrigeration again, how to set up
The first step:determine the working mode is cooling mode, set P0 to C
Step 2:Press the SET button to stop the temperature flashing. Set the stop temperature to 28 °C with the up and down keys.
The third step:stop at 26 ° C, start again at 28 ° C, so the return difference needs to be set to 28-26 = 2, enter the internal menu to set P1 to 2, the cooling case is set!
Package includes
3 x Miniature embedded digital display thermostat
Weight | 0.138 kg |
---|
Customers Also Viewed
20pcs ADC CMOS CD74HC4067 16CH Channel Analog Digital Multiplexer Module Board Sensor Controller
$34.67Sensor & Detector ModuleAdd to cartDescription1. This is a board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch – it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can’t be higher …
10pcs Geekcreit Colorful 3D Mini SMD PCB Stereo Christmas Tree DIY Music Kit
$45.51DIY Electronic KitsAdd to cartDescriptionThis is a simple mini Christmas tree DIY kit. Three different PCBs are combined into a 3D stereo Christmas tree model. A variety of different colors can be selected. It can be powered by a button battery and can be free from the power supply. Built-in 7 LED gradient modes plus 7 different Christmas melody.Manual:Click …
10pcs Geekcreit Colorful 3D Mini SMD PCB Stereo Christmas Tree DIY Music KitRead More
1 Copper Sheet + 2 Aluminum Sheets Heatsink Kit with Black Glue for Raspberry Pi 4B
$9.10Raspberry Pi & Orange PiAdd to cartDescriptionsThe colorful set is 1 copper sheet and 2 aluminum sheets. They are designed for Raspberry Pi 4B for heat dissipation.Package Included1 x Copper Sheet2 x Aluminum Sheets
pyWiFi- ESP8266 Development Board Micro-Python IoT Wireless WiFi Learning Kit
$90.96Motherboard & Development BoardAdd to cartpyBase Boardpyboard interface:support pyboard, pyWiFi-ESP32, pypyWiFi-ESP82662.54mm pin header:lead out all interfaces of pyboardButton * 2:RST and USR buttons are brought outPotentiometer:ADC inputPassive buzzer:DAC outputButton battery holder:Install CR1220 button batteryServo interface:servo interface * 1- * 4 (external isolation circuit is required to connect the servo)OLED interface:4P / 0.96inch / I2C / OLED Display1.77 Inch LCD interface:suitable …
pyWiFi- ESP8266 Development Board Micro-Python IoT Wireless WiFi Learning KitRead More
3pcs 433MHZ High Power Wireless Transmitter Module 3000M Long Range ASK Transceiver Board
$29.79Smart ModuleAdd to cartFeatureProduct Name:Wireless 3000m Transmitter ModuleProduct type ZAB-3000 (without coding)Dimensions:45mm*17mm*6.2mmWorking voltage:DC 9V ~12VWorking current:200~220mAOperating frequency:433MHzTransmit power:>10mwLaunch distance:2000-3000 metersRadiated power:1.5 WModulation method:ASKQuiescent current:0uARated parameter:Symbol:ValueDC supply voltage:VDD-VSS:5VStorage temperature range (TS):TSTG:-12°C to 75°CWelding temperature:+260°C:PIN:Description1:ANT:RF signal input pin, this pin should be connected to the antenna2:VSS:Positive power supply3/4:GND:Negative power supply5:DATA:Data signal output, compatible with CMOS levelsPackage includes3 x Wireless 3000m …
3pcs 433MHZ High Power Wireless Transmitter Module 3000M Long Range ASK Transceiver BoardRead More
10Pcs DHT11 Digital Temperature Humidity Sensor Module for
$25.06Electronic Accessories & SuppliesAdd to cart10Pcs DHT11 Digital Temperature Humidity Sensor Module For Description DHT series numeric humiture sensor Humidity measuring range:20%-90%RH(0-50°Ctemperature compensation) Temperature measuring range:0 to +50°C Humidity measurement accuracy:±5.0%RH Temperature measurement accuracy:±2.0°C Response time Low power consumption Size:about 2.3cm x 1.2cm x 0.5cm Applications HVAC Testing and inspection equipment Automotive Data logger Consumer goods Automatic control Weather station …
10Pcs DHT11 Digital Temperature Humidity Sensor Module forRead More
Reviews
There are no reviews yet.