1S 18650 3.7V Lithium Battery Protection Board 4.2V Charging Voltage Short-circuit and Overcharge Protection
$3.02
Type With nickel sheet Model 1S-4012A / Type With nickel sheet Model 1S-5025 / Type Without nickel sheet Model 1S-5020 /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Model:HXYP-1S-5025
Size:50*25*3.5mm
Maximum operating current:24A
Upper limit instantaneous current:42A
Overcharge voltage range:4.28V÷0.05V
Over-discharge voltage range:2.40V÷0.05V
Quiescent current
Charging voltage:4.2V
Short circuit protection:can protect, delay automatic recovery
Model:HXYP-1S-5020
Size:50*20*3.5mm
Maximum operating current:16A
Upper limit instantaneous current:34A
Overcharge voltage range:4.28V÷0.05V
Over-discharge voltage range:2.40V÷0.05V
Quiescent current
Charging voltage:3.7-3.9V
Short circuit protection:can protect, delay automatic recovery
Mode:HXYP-1S-4012A
Size:40*12*3.5mm
Upper operating current:12A
Upper transient current:17A
Overcharge voltage range:4.28÷0.05V
Overdischarge voltage range:2.4÷0.05V
The static current:Less than30uA
Charging voltage:4.2V
Short circuit protection:Protected,delayed self – recovery
The main function
Overcharge protection, overdischarge protection, short circuit protection, overcurrent protection.
Wiring instructions
B+ is connected to the positive electrode of the battery.
B- Connect the negative pole of the battery.
P+ is the positive input of the battery pack output
P- is the battery pack output and input negative
Package included
1 X 1S 18650 3.7V Lithium Battery Protection Board
Note
Lithium iron phosphate protection board cannot be used for hernia lights, electric drill battery packs, power tool battery packs, electric fish machine battery packs, vacuum cleaners, sweeper battery packs, electric bicycle battery packs, children’s car batteries, motors or with motors This kind of product, 1W fisheye LED light!
Precautions
1. Please pay attention to the use conditions of input and output voltage and load current so that the power consumption in the protection board does not exceed the allowable power consumption of the electrical parameters.
2. The load current should not work for a long time between the upper limit continuous working current and the overcurrent protection current.
3. When the battery is connected, it may not be able to discharge. In this case, the charger can be connected to the normal working state.
4. Although this protection board has built-in anti-static protection circuit, please do not touch the board with your hands when the electric protection board is working, so as to avoid static electricity to damage the protection board.
Weight | 0.011 kg |
---|
Customers Also Viewed
BESTEP 4 Channel 24V Relay Module High And Low Level Trigger for
$10.15Relay ModuleAdd to cartDescription Maximum load:AC 250V/10A, DC 30V/10A. The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA. Working voltage is 24V. Every channel of the module can be set up by high jumper or low level trigger. Fault tolerant design, even if the control line is broken, the relay will not act. Power indicator …
BESTEP 4 Channel 24V Relay Module High And Low Level Trigger forRead More
5Pcs CJMCU-3386 MC33186DH1 Automotive Computer Board Idle Speed Throttle Drive Board A H Bridge
$50.91Other Module BoardAdd to cartDescriptionThe 33886 is a monolithic H-Bridge ideal for fractional horsepowerDC-motor and bi-directional thrust solenoid control. The IC incorporatesinternal control logic, charge pump, gate drive, and low RDS(ON) MOSFEToutput circuitry. The 33886 is able to control continuous inductive DC loadcurrents up to 5.0 A. Output loads can be pulse width modulated (PWM-ed)at frequencies up to 10 …
20pcs Light Dependent Resistor LDR 5MM Photoresistor Photoelectric Switch Element Photo Detector 5516
$4.36Module ComponentsAdd to cartSpecificationsModel:5549Voltage(VDC):150Power Consumption(mw):100Ambient Temperature(C):-30~+70Spectral Peak(nm):540Bright Resistance(10Lux)K┯:5-10Response Time(MS):Rise:20 Decline:30Package included20 x Resistor
PWM 20A 12V/24V Auto Solar Panel Solar Charge Controller Battery Charge Adapter LCD USB
$36.44Solar ControllersAdd to cartSpecificationsName:20A 12V/24V LCD Display PWM Solar Panel Charge ControllerModel:C11465Rated voltage:12/24V AUTOCharge current:20ADischarge current:10AMax.PV input power:260W(12V),520W(24V)Max solar input12V battery,the highest 23V24V battery when the highest 46VEqualization:14.2VFloat charge:13.7V (defaul,adjustable)Discharge stop:10.7V(defaul,adjustable)Discharge reconnect:12.6V(defaul,adjustable)Charge reconnect:13VVoltage of open light:Solar panel 8V(Light lights delay)Voltage of close light:Solar panel 8V(Light off delay)USB output:2 way USB output,5V/2A(Max.)Self-consumeOperationg temperature:-35-60℃Color:BlackSize:133.5mmx70mmx35mmFeatureBuild-in industrial micro controller.Big LCD display,all adjustable …
PWM 20A 12V/24V Auto Solar Panel Solar Charge Controller Battery Charge Adapter LCD USBRead More
Waveshare Sensor Expansion Board Supports XBEE Module Compatible for Arduino
$39.35Expansion Board & ShieldAdd to cartDocumentsSchematic:Click here to openSample tutorial:Click here to openWhat do I mainly doArduino is a huge ecosystem. If the Pi interface can be converted to the Arduino standard, it can be connected to a variety of compatible Arduino expansion boards and connected to the Arduino ecosystem to obtain more available resources.I just do this.Basic situationCompatible with …
Waveshare Sensor Expansion Board Supports XBEE Module Compatible for ArduinoRead More
Emakefun DC5V RGB Tricolor Lamp Module 5PIN Anti-reverse Connector Compatible with Lego Jack Fixing
$10.61Sensor & Detector ModuleAdd to cartFeature1. Supply voltage:5V2. Connection method:5PIN anti-reverse connection Dupont line3. Module size:40*22.5mm4. Installation method:M4 screw compatible with Lego jack fixing5. Connection port:PH2.0Package includes1 x RGB Tricolor Lamp Module (the other items are not includes)
Reviews
There are no reviews yet.