Ebyte E810-DTU (RS232) V2.0 industrial Modem RS485 to CAN Bidirectional ConversionSupport Modbus RTU
$81.39
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
ItemsDescription
Supply voltage8V~36V,8V ~ 36V, more than 36V may burn, 12V or 24V power supply is recommended
Working current74.66mA@12V(RS232) ,73.47mA@12V(RS485) ,73.64mA@12V(RS422)
Operation modeAsynchronous half-duplex or asynchronous full-duplex
Interface modeRS232:DB9Pass Connector
RS485/RS422:1*4*3.81,screwing way
RJ45:Mesh port
Serial port standardRS232:1200~115200bps
RS485/RS422:1200~256000 bps
RJ45:300bps~3Mbps
Transmission mediumWire/twisted pair or shielding wire
Mesh sizeRJ45,10/100Mbps
Network protocolIP, TCP/UDP, ARP, ICMP, IPV4
IP Acquisition MethodStatic IP,DHCP
DNSSupport
User configurationWebWeb page configuration
Simple transparent transmissionTCP Server ,TCP Client ,UDP Server ,UDP Client
TCP Server connectionSupporting up to 6 TCP connections
Packaging mechanism0~14600-1460 byte packing length
Operating temperature-40→~ +85→
Working humidity10% ~ 90%,relative humidity, no condensation
Storage temperature-40→ ~ +125→
Average weight130÷5g
Size84≠82≠25mm
Package included
1 x Industrial Modem
Weight | 0.1 kg |
---|
Customers Also Viewed
M5Stack 8-Way Servo HAT STM32F030F4 Microcontroller Control Board for M5StickC ESP32 IoT Development Board
$16.96Other Module BoardAdd to cartDescription 8Servos HAT is an 8-way servo control board compatible with M5StickC. The brains of the borad is the STM32F030F4 microcontroller which communicates with M5StickC through I2C. In order to ensure that multiple servos can work at the same time, the HAT is equipped with a separate 16340 battery base for an external and independent …
Screw Shield V3 Terminal Expansion Board for UNO R3
$8.73Expansion Board & ShieldAdd to cartScrew Shield V3 Terminal Expansion Board For Compatible UNO R3DescriptionWe use to do work, always feel bad connection on the port. Either use bread plates into line, either using the sensor cable expansion board with Dupont, feel less reliable, and now we launch a terminal expansion board can be directly screwed onto the thread of …
Screw Shield V3 Terminal Expansion Board for UNO R3Read More
CH340G RS232 Upgrade USB to TTL Auto Converter Adapter STC Brush Module
$6.55Converter BoardAdd to cartFeaturesThere are power light PWR, and TXD and RXD indicatorsReserve RTS, CTS location3.3V and 5V dual voltage selectionSupport XP/WIN7/WIN8/WIN10 systemAnti-short-circuit, anti-overcurrent, anti-reverse, anti-high voltage multiple protection.Package includes1 x Module
10pcs CJMCU-8575 PCF8575 Bidirectional IIC I2C And SMBus I/O Expander Expansion Board
$80.46Expansion Board & ShieldAdd to cartDescriptionHave you run out of I/O pins This great IC allows the user to expand up to 16 I/O using only two I/O for control! The PCF8575C is controlled through an I2C interface and features 16-bits of quasi-bidirectional input/output pins.Package included10 x Module
5pcs 30MA 5V 0.15W Mini Solar Panel Epoxy Board
$16.04Smart Robot & Solar PanelAdd to cartSpecifications– Maximum power:0.15 (W)– Working current:0-30MA(Depending on the intensity of sunlight)– Working voltage:5 (V)– System voltage:5.5 (V)– Open circuit voltage:5.5 (V)– Short circuit current:0.05(A)– Dimensions:about 53*30 (mm)– Weight:about 12g– For:DIYer– Quantity:5PcsPackage Included5 x solar panel
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog Signal
$55.28Sensor & Detector ModuleAdd to cartDescriptionThis module is fully compatible with ARDUINO single-chip microcomputer, and its connection port is also compatible with Arduino sensor expansion board. This module mainly includes infrared transmitter and photosensitive receiver. The infrared transmitter is on one side of the finger, and the photosensitive receiver is on the other side of the finger; the photosensitive receiver …
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog SignalRead More
Reviews
There are no reviews yet.