3pcs DC 3.7-6V 1-3A 400KV Pulse High Voltage Generator inverter Transformer Boost Power Module
$26.47
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Input voltage:3.7-6V
Input current:1-3A
Type:High voltage power supply
Modulation Method:Pulse width modulation (PWM) type
Transistor Connection method:Other
Output power:8 (W)
Output voltage:400KV
Working efficiency:88%
Output ripple noise:55
Output voltage accuracy of 95%
Voltage regulation 85%
High voltage bipolar discharge distance:10-20mm
Size:38 x 41mm (L x H)
Weight:30g
Features
1. This module used for the production of science with high voltage inverter transformer and booster module.
2. Finished product after input DC4.8-7.2 V voltage can be obtained at the output end of around 500000-1000000 volts dc high voltage arc (about 1-2 cm).
3. It can be used as a high school science experiment, electronic instruments, small anion generator, scientific production of high voltage source is used.
4. Because of high power, low heat-sinking capability of the internal, the module can’t work for long time.
5. Small size and high efficiency.
Note
1. We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.
2. Avoid power on when No load.You must adjust the appropriate distance for high-voltage terminal before power on.The longer Arcing distance,the higher input voltage and battery capacity.
3. It is prohibited exceed the maximum arcing distance.Otherwise,Energy can not be released due to high pressure, easily damaged modules.
4. Please connect it to metal after test to release surplus energy!
5. It is a high-pressure arc generator and not high temperature arc generator so it can not ignite paper or cigarette.
6. It Can not work long time.
Package included
3 x High voltage inverter
Weight | 0.084 kg |
---|
Customers Also Viewed
5Pcs A87 4 Channel Optocoupler Isolation Module High And Low Level Expansion Board
$17.08Other Module BoardAdd to cartDescription 1. Function:Use the low level to control the high level. Such as the use of single-chip 3V or 5V voltage control 9V or 12v voltage. 2. HVCC should not exceed 24V. Output OUT1 / OUT2 / OUT3 / OUT4 output current equal to HVCC / 5.1K, absorption current 500ma. 3. This module uses TLP281 …
5Pcs A87 4 Channel Optocoupler Isolation Module High And Low Level Expansion BoardRead More
3pcs DC 3.3V To 20V 5.8GHz Microwave Radar Sensor intelligent Trigger Sensor Switch Module
$16.24Sensor & Detector ModuleAdd to cartDescriptionIt uses Doppler radar technology, with auto-sensing capabilities to control other product,High sensitivity, sensor distance, reliability, wide angle sensor,Wide supply voltage range and other characteristics. Widely used in lighting situations,anti-theft alarm situations.Features1. microwave sensors using planar antenna and receiving echo.2. The switch is active sensors.3. The sensors emit a high-frequency electromagnetic waves and receives their …
3pcs DC 3.3V To 20V 5.8GHz Microwave Radar Sensor intelligent Trigger Sensor Switch ModuleRead More
24V Air Parking Heater Flame Sensor Igniters Flame Detecter 82306B for Webasto Air top 2000
$70.86Solar CollectorsAdd to cartSpecificationsBrand Name:AutoleaderMaterial:Silicon NitrideOEM:82306BItem weight:11gFeaturesThis product is mainly made of silicon nitride ceramic substrate, with tungsten filament as the heat source, tungsten wire embedded in silicon nitride matrix, via hot-press sintering process to form an organic whole, then through grinding, welding wire, thus made the ignition components.Fitmentfor Webasto Air Top 2000Package Included1x Parking Heater Senser
L293D WiFi Smart Robot Car Motor Driver Expansion Board Dual High Power H Bridge Based on ESP12E
$9.79Expansion Board & ShieldAdd to cartL293D WiFi Smart Robot Car Motor Driver Expansion Board Dual High Power H Bridge Based On ESP12E For Specifications 1. Motor power (VM):4.5 ~ 36V 2. Control power (VIN):4.5V ~ 9V(10V MAX) 3. Provide the shortcut connector (short by VM and VIM), thus can use 4. May use common power source (4.5V~9V) by shorting VM …
220V 1000W Hot Plate Electric Iron Burner Heating Stove Heater Household Laboratory Heating Equipments
$52.64Laboratory Heating EquipmentsAdd to cartSpecificationsType:Electric Stove BurnerPlug Type:EUColor:WhiteVoltage:220VPower:1000WRegulating temperature:5 LevelsMaterial:Stainless Steel + IronSize:14*14*5CM (5.5*5.5*2in)Features– Adopted iron shell, thicken panel, material sturdy and durable to use– Portable single burner with 500 watts of power– Powered by electric, do not need fuel, eco-friendly– Easy-to-use temperature-setting knob for low, medium, or high heat– Provides quick and sustained heat; power indicator light– Single …
Reviews
There are no reviews yet.