3pcs DC12V 10A 1CH 433MHz Wireless Relay RF Remote Control Switch Receiver Board
$12.51
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
1.Input Voltage:DC10-14V
2.Standby Current
3.RF Frequency:433MHZ
4.RF Working mode:Super heterodyne receiver
5.Receiver Sensitivity:>90dBm
6.Remote Control Distance:>100 meter(In open environment)
7.Decoding Way:MCU Software decoding
8.Can store the number of remote control:50
9.Support remote control type:Fixed code, learning code
10.Channel:1CH
11.Multiple working modes:(Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched,Delay off)
12.Wiring Method:Fixed wiring terminal
13.Working Voltage:DC12V
14.Output Current:10A
15.Rated load:10A 250VAC / 10A 125VAC
10A 30VDC / 10A 28VDC
16.Output:Normally open,Common,Normally closed
17.Dimension:3.5cm*3cm*1.6cm
Working/output way
1.Jog:Press the learning button then release, set the mode from the system automatically working mode to action mode, wait for a while, when the board LED off, said it is into the learning state, press the remote control, the system received the signal. The LED flashes 5 times and goes off again. After 3S delay, LED light marked learning success, the system automatically withdraw from the learning state.
2.Self-locking:Press the learning button, then release, press 2 times, the system automatically set to self-locking mode, wait for a while, LED off, it is into the learning state, press the remote control, LED flash 5 times Off. 3S after the delay, LED light learning success.
3.Interlock:press the learning button, then release, press 3 times in succession, the system is set to interlock mode.
4.Delay:Press remote control relay pull-in,release the remote control and begin timekeeping,after 5s,10s,15s will automatically close the relay
Description
1. press the learning code .the indicator flash ,loosen your finger ,press any button of the remote control
the indicator flash 2 times and off .it mean you learn it successfully .
2. it can learn more than 12 PCS 2262 or 1527 chip with the different code wireless 433MHz remote control
3. remove/clean:press the learning button about 8 seconds , the indicator turn on to off, it means the information that you keep have been removed successfully .
Package included
3 x 12V 1CH 433MHz Wireless Relay Switch Receiver
Weight | 0.051 kg |
---|
Customers Also Viewed
R414A01 RS485 Modbus RTU Temperature and Humidity Sensor Module DHT12 for indoor and Outdoor Room Computer Room Farm
$26.23Sensor & Detector ModuleAdd to cartClick here to download document:R414A01FeaturesWorking voltage:DC 5-23VWorking current:8MA(12V)MODBUS RTU protocol,03 Read,06Write.Serial baud rate:9600(default),N,8,1By modifying the RS485 address, up to 247 module s can be connected (more than 16 US ether485 repeater)Temperature and humi dity sensor is DHT12The voltage conversion module is CE018,a High-efficiency and Low-heat voltage ConverterSize:Module is 45 X 30 X 27MM,Shell is 50 …
20pcs WITRN-POW001 Multi-function Adapter Board Voltage and Current Measurement for Type-C USB A USB C MiniUSB MicroUSB 3.5 DC 5.5×2.1 DC 5.5×2.5 DC
$23.27Converter BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Support Multiple Interface ConverterUSB AUSB CMiniUSBMicroUSB3.5 DC5.5×2.1 DC 5.5×2.5 DCPackage Included20 x WITRN-POW001 Multi-function Adapter Board
50pcs 270uF 16V 8x8mm Low ESR 16V270uF for Motherboard VGA Solid Capacitor
$16.47Electronic Accessories & SuppliesAdd to cartDescriptionLow ESR, high ripple current capabilityESR 5mΩ max (2 to 4VDC)Longer life(20000 hours at 106 Celsius)Rated voltage:2 to 16VDCCategory temperature:-55 to +105 CelsiusTolerance:+/-20%(M)Package included50 x Solid Capacitors
Keyes Brick DS1302 Real-time Clock Sensor Module Compatible with Micro Bit
$4.93Sensor & Detector ModuleAdd to cartSpecificationWorking voltage:DC 3.3-5VInterface:5pin interfaceWorking Temperature:0→–70→Battery CR2032 (not included)Size:36*22*6mmWeight:3.6gPackage included1 x DS1302 Clock Sensor Module(the other items are not includes)
M5StickC ESP32 PICO Color LCD Mini IoT Development Board Finger Computer + M5Stack PowerC HAT Design for M5StickC with IP3005 and IP5209 Power Bank Battery Charger Board
$65.60Motherboard & Development BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.This is without watch accessories,If you like with watch accessories>>>with watch accessories:Click here to BUY>>>More M5Stack Item:Click here to openDescriptionM5Stick is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, …
Reviews
There are no reviews yet.