5pcs MQ-4 Methane Natural Gas Sensor Module Shield Liquefied Electronic Detector Module
$20.68
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
– The gas sensing material used in the MQ-4 gas sensor is tin dioxide (SnO2) with low conductivity in clean air.
– When there is a flammable gas in the environment where the sensor is located, the conductivity of the sensor increases as the concentration of flammable gas in the air increases.
– A simple circuit can be used to convert the change in conductivity into an output signal corresponding to the gas concentration.
– The MQ-4 gas sensor has high sensitivity to butane, propane and methane, and has a good balance between methane and propane.
– This sensor detects a wide range of flammable gases, especially natural gas, and is a low cost sensor for a variety of applications.
– Suitable for monitoring equipment for liquefied gases, natural gas and gas in the home or industry. Excellent resistance to ethanol and smoke.
Features
1. It adopts high quality double panel design with power indication and TTL signal output indication;
2. It has DO switch signal (TTL) output and AO analog signal output;
3. The TTL output valid signal is low. (When the output is low, the signal light is on, it can be directly connected to the MCU or relay module)
4. The voltage of the analog output, the higher the concentration, the higher the voltage.
5. It has good sensitivity to gas and natural gas detection.
6. there are four screw holes for easy positioning;
7. product dimensions:32 (L) * 20 (W) * 22 (H)
8. has a long service life and reliable stability
9. fast response recovery characteristics
Electrical Performance
Dection of gas:Natural gas/Methane
Dection of Concentration:300-10000ppm
Input voltage:DC5V
Power consumption (current):150mA
DO output:TTL digital quantities 0 and 1 (0.1 and 5V)
AO output:0.1-0.3V (relatively non-polluting), the highest concentration voltage is about 4V
Using the chip:AT89S52
Crystal:11.0592MHZ
Baud rate:9600
Compilation environment:Keil
Special Reminder
After the sensor is energized, it needs to be preheated for about 20S, and the measured data is stable. The heating of the sensor is a normal phenomenon, because there is a heating wire inside, if it is hot, it is not normal.
Package Included
5 x MQ-4 Gas Sensor Module
Weight | 0.035 kg |
---|
Customers Also Viewed
200pcs 20cm Male to Male Color Breadboard Jumper Cable Dupont Wire
$16.16Electronic Accessories & SuppliesAdd to cartDescription Durable and reusable Easy to install and use A popular choice for construction or repair Be used for electronic project and Genuine product. Specification Length:20cm Quantity:five row of 40 roots 1p-1p pin male to male header Compatible with 2.54mm spacing pin headers Package includes 200 x male to male jumper wire
3pcs ESP8266 ESP-12S Remote Serial Port WIFI Transceiver Wireless Module
$29.04Smart ModuleAdd to cartDescriptionBased on ESP8266 wifi ICFully compatible with forepast versions ESP-12E, or ESP12FFCC&CE&RoHS all passedLow-power consumptionFurther improved antenna design, better signal performanceCan refer to ESP-12F for other infosPackage included3 x ESP-12S Wireless Module
96Pcs Chicken Plucker Fingers Rubber Poultry Duck Turkey Goose Feather Plucking Glue Stick
$99.21Solar CollectorsAdd to cartFeatures-The glue stick has the advantages of high wear resistance, soft texture, large elasticity, no easy breaking, good hair removal effect, low skin breaking rate and the like.-Widely used in chickens, ducks, geese and other slaughter equipment.SpecificationName:Chicken PluckerMaterial:Nat-rubberColor:Yellow or BlackSizes:20 x 65mmPackage included96 x Chicken Plucker glue stickNoteSilicone products, the edge is expected to belong …
96Pcs Chicken Plucker Fingers Rubber Poultry Duck Turkey Goose Feather Plucking Glue StickRead More
10pcs 1838T infrared Sensor Receiver Module Board Remote Controller IR Sensor with Cable
$31.47Sensor & Detector ModuleAdd to cartFeatures– Can receive standard 38KHz remote control signals by means of programming can decode the remote control signals– Strong ability to resist electromagnetic interference and light– Widely used in stereo, TV, set-top boxes, digital photo frame, car stereo, remote control toys, satellite receivers, hard disk players, air conditioner, heater, electric fan, lighting and other home …
10pcs 1838T infrared Sensor Receiver Module Board Remote Controller IR Sensor with CableRead More
3pcs CC1101-868MHz 2-3.6V RF Low Power UHF Wireless Transceiver Module 1.2K To 500kps 64 Bytes SPI
$29.02Smart ModuleAdd to cartDescriptionThe CC1101-868MHz RF module is low cost and highly integrated UHF transceiver designed for low power wireless applications. These pro certificate modules, operating in the license free 868 MHz ISM band, can be easily integrated into your application, thereby reducing development time and cost.FeaturesLow power UHF wireless transceivers @868MHzSupport FSK, GFSK, ASK/OOK and MSKConfigurable data …
Geekcreit Upgrade DIY EC1515B DS1302 Light Control Rotation LED Electronic Clock Kit Size 81x81x2mm
$13.11DIY Electronic KitsAdd to cartDesign Red digital tube+ Red & Green LED with housing / Design Red digital tube+ Red & Blue LED with housing / Design Red digital tube+ Red & Blue LED without housing / Design Red digital tube+ Red & Green LED without housing / Design Blue digital tube+ Red & G
Reviews
There are no reviews yet.