M5StickC ESP32 PICO Color LCD Mini IoT Development Board Finger Computer + M5Stack PowerC HAT Design for M5StickC with IP3005 and IP5209 Power Bank Battery Charger Board
$65.60
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
This is without watch accessories,If you like with watch accessories
>>>with watch accessories:Click here to BUY
>>>More M5Stack Item:Click here to open
Description
M5Stick is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, open source, IoT development board.
What it can do This tiny block is able to realize your idea, enlight your creativity, and help with your IoT prototying in a very short time. It will takes away a lot of the pains form the development process.
M5stick is one of the core devices in M5Stack product series which is built in a continues growing hardware & software ecosystem. It has a lot of compatible modules & units, as well as the open source code & engineering community that will help you maximum your good in every step of the developing process.
Item Features
– 5V DC power supply
– USB Type-C
– ESP32-based
– 4 MByte Flash
– 6- IMU MPU6886
– Red LED
– Buzzer
– IR transmitter
– 1 Buttons, OLED(1.3 inch), 1 Reset
– 2.4G Antenna:Proant 440
– 95 mAh Lipo Battery
– Extendable Socket
– Grove Port
– Wearable & Wall mounted
– Development Platform UIFlow, MicroPython, for
ESP32 Features
– 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
– Integrated 520 KB SRAM
– Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
– Integrated dual mode Bluetooth
– Hall sensor
– 10x capactive touch interface
– 32 kHz crystal oscillator
– PWM/timer input/output available on every GPIO pin
– SDIO master/salve 50MHz
– card interface support
PinMap
RED LED & IR Transmitter & BUTTON A & BUTTON B
ESP32:GPIO10:GPIO9:GPIO37:GPIO39
RED LED:LED PIN
IR Transmitter:Transmitter Pin
Button A:Button Pin
Button B:Button Pin
TFT LCD
Driver IC:ST7735S
Resolution:80 * 160
ESP32:GPIO15:GPIO13:GPIO23:GPIO18:GPIO5
TFT LCD:TFT_MOSI:TFT_CLK:TFT_DC:TFT_RST:TFT_CS
GROVE PORT
ESP32:GPIO33:GPIO32:5V:GND
GROVE port:SCL:SDA:5V:GND
MIC (SPM1423)
ESP32:GPIO0:GPIO34
MICPHONE:SCL:SDA
6- posture sensor (MPU6886) & power management IC (AXP192)
ESP32:GPIO22:GPIO21
6- posture sensor:SCL:SDA
power management IC:SCL:SDA
Power on / off
Power on:Click the reset button
Shutdown:Double the reset button
datasheet
ESP32-PICO
ST7735S
BM8563
MPU6886
AXP192
SPM1423
Example
Comparision Between Different Development Kits of M5
For details click here
Download chart click here
M5StickC facory test code
M5StickC Vending Machine
Description
PowerC HAT is a charging module specially designed for m5stickc, with built-in ip3005 high-precision lithium battery protection IC and ip5209 power management IC. It uses I2C communication protocol to carry out data transmission with m5stickc of the host computer, and can check the voltage, current and other information through programming. The back battery seat of the module can be installed with two 16340 batteries, which can be charged by the charging module, and can also be used as a charging treasure to provide external power through the battery In addition, the module provides an I2C interface for connecting I2C peripherals, a typec interface for power input, a usb-a bus for power output, with a voltage output of 5V / 1.5A and an input voltage of 5V. The module is equipped with an independent switch, which can be opened once and closed twice.
Product Features
Battery testing
power bank
Battery charger
IIC Address 0x75
Weight & Dimension
Dimension:55mm x 35mm
Weight:19g
Package Included
1 x M5StickC
1 x USB Type-C cable
1 x PowerC HAT(include battery 2 * 750mAh)
Weight | 0.105 kg |
---|
Customers Also Viewed
150W 18V Mono Solar Panel Dual USB 12V/5V DC Monocrystalline Solar Charger for Car RV Boat Battery Charger Waterproof
$164.01Solar PanelAdd to cart150W 18V Mono Solar Panel Dual USB 12V/5V DC Monocrystalline Flexible Solar Charger For Car RV Boat Battery ChargerFeatures1.Equipped with 12V DC5.5×2.1 & 5V USB output interface.2.Dedicated for 12V battery and 5V device charging.3.EVA+PET at front panel, flexible, light-weight but durable.4.Mono-crystalline solar Cell with efficient up to 21%.5.4x eyelet and free 2x carabiners for mounting …
DIY 5×7 Prototype Paper PCB Universal Experiment Matrix Circuit Board
$4.36Module ComponentsAdd to cartDescriptionMaterial:Single Side Copper PCB.Hole Dia:about 1mm.Hole pitch:standard 2.54mm.For point to point DIY soldering.Size:5cm x 7cm – 1.97inch x 2.76inch.Quantity:1PCPackage Included1 x PCB Board
FR4 300x200mm Double Side Copper Clad Laminate PCB Board Fiberboard CCL
$17.48Other Module BoardAdd to cartFR4 300x200mm Double Side Copper Clad Laminate PCB Board Fiberboard CCLSpecificationPanel Size:Approx. 300mm x 200mm or 11.8inch x 7.88inch (inch)Thickness:0.06inch ±0.005 (1.5mm ± 0.15)Weight:Approx. 194g eachLayers:Double SidePanel:FR4Operating temperature:Up to 140 °C or 285°FDescriptionThis Double PCB Copper Clad Laminate Board is made of copper foil by the hot-pressing technology.Super-fine steel-wool, Restore4, Tarn-X, roscherite, Zap or similar …
FR4 300x200mm Double Side Copper Clad Laminate PCB Board Fiberboard CCLRead More
10pcs DC Jack Power 7~12V to DC5V/3.3V Step Down Converter Voltage Regulator Power Supply Module for Breadboad OPEN-SMART for Arduino – products that work with official for Arduino boards
$34.43Power Supply ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionThis is a mini LDO step-down power module based on AMS1117-5.0 and AMS1117-3.3, and it output fixed 5V / 3.3V.It is a small size, lightweight, especially for model airplanes, smart cars, DIY …
60A DC Brush Motor Speed Controller forward Reverse PWM Control Pulse Width Speed Digital Display 10-55V/3KW
$69.50Motor PWM Speed ControllerAdd to cartThe main purpose1. All kinds of general-purpose DC brush motor speed control2. Various types of automotive motor speed control (automobile cooling fan speed control, car fan speed control, car wiper motor speed control, car air conditioning fan speed control)3. Production line conveyor speed control, pipeline exhaust fan speed regulation, treadmill speed regulation, multiple computer fan …
24Value 500Pcs 0.1uF-1000uF Electrolytic Capacitors + 10Value 600 Pcs 0.1uF-10uF Ceramic Capacitor Assortment Box Kit
$32.79Module ComponentsAdd to cartProduct FeaturesThe nice sturdy box helps you keep all caps in order.Assortment Box for easy access.All of the capacitor is marked the value,easy to find what you need.High quality and long life. Package Included1 x 10Value 600pcs Ceramic Capacitor1 x 24Value 500pcs Electrolytic Capacitor
5Pcs KY-015 DHT11 Temperature Humidity Sensor Module
$17.16Sensor & Detector ModuleAdd to cart5Pcs KY-015 DHT11 Temperature Humidity Sensor Module ForDescriptionThe sensor module is including resistive humidity sensing component and NTC temperature testingThe compatible digital temperature humidity sensor module is component and connected with 8-byte MCUGreat anti-interference ability and durableWith fixed bolt hole for easy installation3 DO small plate switch digital output interface connected microcontroller IO portTwo module …
5Pcs KY-015 DHT11 Temperature Humidity Sensor ModuleRead More
100pcs 270uF 16V 8x8mm Low ESR 16V270uF for Motherboard VGA Solid Capacitor
$29.08Electronic Accessories & SuppliesAdd to cartDescriptionLow ESR, high ripple current capabilityESR 5mΩ max (2 to 4VDC)Longer life(20000 hours at 106 Celsius)Rated voltage:2 to 16VDCCategory temperature:-55 to +105 CelsiusTolerance:+/-20%(M)Package included100 x Solid Capacitors
Reviews
There are no reviews yet.