Automatic Irrigation Module DIY Set for Soil Moisture Detection and Automatic Water Pumping
$10.92
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Overview
This product does not need programming, not include the microcontroller, so we don’t provide any code.
We don’t provide power, you can use the charging treasure (5V DC) as a power supply, or use 4 AA batteries.
About Testing
1. Test the relay module:connect the relay module VCC to 5V, GND to the ground, and IN to GND, the relay is will beat, if IN is vacant, the relay will restored, so you can hear the “Kaka” sound;
2. Test the soil moisture sensor module:connect the fork probe and transmitter module with two dupont cable, connect the transmitter module VCC to 5V, and GND to the ground. The red power lamp is always on as soon as it is powered on, and the green (blue) led will gleam for once; put the fork probe directly into the water, the green (blue) light will on;
3. Connect the red line of the pump to 5V, black wire to the ground, the water pump will start work. Note that:the test can be performed for 1 second. because it can not expose to the air for a long time.
4. According to the schematic assembly.
Note
1. This product needn’t welding, but it requires you to strip the wire, twist the copper wire together and protect it with black tape.
2. The pump can not run a long time in the air;
3. Connect the system and power, the pump will work all time, it is right, because in the air, the probe can not detect the humidity, if install it to the flowerpot, then it can normally work.
Note:Do not pour water directly onto the soil probe. If the humidity of the water is too high, it will cause the product to rust and become inoperable.
4. Pump without power supply, power supply matched to the other, and water pump is a dc pumps, pump voltage 3 v, with DC3 – use 6 v power supply. (cannot be used directly with 220 v ac voltage)
Pump
DC Voltage:2.5-6V
Working current:130-220mA
Power:0.4-1.5W
Maximum lift:40-110cm / 15.75′-43.4′
Flow rate:80-120L/H
Outside diameter of water outlet:approx. 7.5mm / 0.3′
Inside diameter of water outlet:approx. 4.7mm / 0.18′
Diameter:approx. 24mm / 0.95′
Length:approx. 45mm / 1.8′
Height:approx. 33mm / 1.30′
Wire length:about 15-20cm (red:’ + ‘, black(white):’ – ‘)
Material:engineering plastic
Driving mode:brushless DC design, magnetic driving
Continuous working life of 500 hours
Package Included
1 x L9110S Controller Board
1 x Soil Moisture Probe + Comparison Module
1 x Small Pump
1 x Battery Holder
1 x 50cm Silicone Tube
Weight | 0.062 kg |
---|
Customers Also Viewed
20pcs WEAH-122 Speaker Professional Frequency Divider Car Horn Sound Power Crossover
$139.47Amplifier BoardAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.FeatureBrand:WEAHModel:122Power:110WResistance:4-8ohmSize:100x 54 x 28mmFrequency:750-2000HzFiltering Characteristics:Pure Alto CrossoverPackage includes20 x Frequency Divider
DS18B20 Expansion Board Shield for D1 Mini DS18B20 Temperature Measurement Sensor Module
$6.55Expansion Board & ShieldAdd to cartFeatures1. Supporting the D1 MINI2. The Ar-duino compatible, using A-rduino IDE for programming3. 11 the XI/O pins4. 1 XADC pin (0-3.3V)5. Support the OTA onlinePackage included1 x DS18B20 Module2 x Long female pin2 x Short female pin2 x Normal pin
Human Body Pyroelectric infrared induction Alarm Circuit Kit Welding Electronic Training DIY
$8.73DIY Electronic KitsAdd to cartFeatureBoard size:5*4.9cmPower supply voltage:5-6V DCFunction realizationThe human body infrared sensor alarm circuit is composed of pyroelectric infrared sensor PIR1 (D203S), infrared sensor signal processor U1 (BISS0001), voice chip IC1 (C002) and alarm circuit. The circuit can be used as a home anti-theft, without sound, light, vibration, even in a dark state, once it enters the …
CPU info 1.6 inch LCD 84×48 Memory Display Module with Backlight for Raspberry Pi Zero / 1/2 / 3 /3B+
$22.95Raspberry Pi & Orange PiAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionThis CPU Info 1.6-inch LCD resolution is 84*48, which can be used in the Pi0/Pi1/Pi2/Pi3 full range of Raspberry Pi. It features a 26Pin GPIO pin header design. The female pin on …
BESTEP 6 Channel 5V Relay Module High And Low Level Trigger
$19.67Relay ModuleAdd to cartDescriptionMaximum load:AC 250V/10A, DC 30V/10A.The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA.Working voltage is 5V.Each channel of the module can be set up by high jumper or low level trigger.Fault tolerant design, even if the control line is broken, the relay will not act.Power indicator (green), 6 relay status indicator (red).The …
BESTEP 6 Channel 5V Relay Module High And Low Level TriggerRead More
Reviews
There are no reviews yet.