Automatic Irrigation Module DIY Set for Soil Moisture Detection and Automatic Water Pumping
$10.92
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Overview
This product does not need programming, not include the microcontroller, so we don’t provide any code.
We don’t provide power, you can use the charging treasure (5V DC) as a power supply, or use 4 AA batteries.
About Testing
1. Test the relay module:connect the relay module VCC to 5V, GND to the ground, and IN to GND, the relay is will beat, if IN is vacant, the relay will restored, so you can hear the “Kaka” sound;
2. Test the soil moisture sensor module:connect the fork probe and transmitter module with two dupont cable, connect the transmitter module VCC to 5V, and GND to the ground. The red power lamp is always on as soon as it is powered on, and the green (blue) led will gleam for once; put the fork probe directly into the water, the green (blue) light will on;
3. Connect the red line of the pump to 5V, black wire to the ground, the water pump will start work. Note that:the test can be performed for 1 second. because it can not expose to the air for a long time.
4. According to the schematic assembly.
Note
1. This product needn’t welding, but it requires you to strip the wire, twist the copper wire together and protect it with black tape.
2. The pump can not run a long time in the air;
3. Connect the system and power, the pump will work all time, it is right, because in the air, the probe can not detect the humidity, if install it to the flowerpot, then it can normally work.
Note:Do not pour water directly onto the soil probe. If the humidity of the water is too high, it will cause the product to rust and become inoperable.
4. Pump without power supply, power supply matched to the other, and water pump is a dc pumps, pump voltage 3 v, with DC3 – use 6 v power supply. (cannot be used directly with 220 v ac voltage)
Pump
DC Voltage:2.5-6V
Working current:130-220mA
Power:0.4-1.5W
Maximum lift:40-110cm / 15.75′-43.4′
Flow rate:80-120L/H
Outside diameter of water outlet:approx. 7.5mm / 0.3′
Inside diameter of water outlet:approx. 4.7mm / 0.18′
Diameter:approx. 24mm / 0.95′
Length:approx. 45mm / 1.8′
Height:approx. 33mm / 1.30′
Wire length:about 15-20cm (red:’ + ‘, black(white):’ – ‘)
Material:engineering plastic
Driving mode:brushless DC design, magnetic driving
Continuous working life of 500 hours
Package Included
1 x L9110S Controller Board
1 x Soil Moisture Probe + Comparison Module
1 x Small Pump
1 x Battery Holder
1 x 50cm Silicone Tube
Weight | 0.062 kg |
---|
Customers Also Viewed
20Pcs 5V To 3.3V DC-DC AMS1117 800MA Step Down Power Supply Buck Module
$16.24Power Supply ModuleAdd to cart20Pcs 5V To 3.3V DC-DC AMS1117 800MA Step-Down Power Supply Buck ModuleFeaturesSize:8.6 x 12.33 mmInput voltage:DC 4.2 V – 10 VOutput:3.3 V, 800 mANote1.Boost modules or buck module indicate the operating voltage, Please do not exceed operating voltage, or it will be damaged easily!2.Boost module output voltage can only be greater than or equal to …
20Pcs 5V To 3.3V DC-DC AMS1117 800MA Step Down Power Supply Buck ModuleRead More
XD-37 12V 72W Electronic Semiconductor Refrigeration DIY Air Cooling System Small Air Conditioning
$35.52Electronic Accessories & SuppliesAdd to cartFeatures1. Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor technologies and electronic assembly techniques.2. Application:Fish tank cooling, computer water cooling, circulating water cooling, cooling equipment, etc.3. Use to Connect the pump and the power supply.4. Diy kits Thermoelectric Peltier refrigeration cooling system.Fast cooling, outstanding effect.5. Simple operation, strong practicability.DescriptionsNo noise, …
5pcs 2.4G NF-04 Wireless SPI Module BK2425 250k~2Mbps Transparent Transmission Receiver for Doorbell Remote Control Switch
$11.42Smart ModuleAdd to cartIntroductionNF-04 is a 2.4G wireless module with small size and on-board antenna. It has a high airspeed (up to 2Mbps), SPI interface, and a pure hardware module. It has high stability, high cost performance and good spectrum test characteristics. , small size, using all industrial grade components.NF-04 can be widely used in various Internet of …
10pcs Mini 2A DC DC Buck Converter 3.3-5.5V to 3.3V Module Step Down Voltage Regulator Module
$30.16Boost & Buck ModuleAdd to cartDescriptionINPUT 3.5V/1.4A; OUTPUT 3.3V/1.5AINPUT 3.7V/1.89A; OUTPUT 3.3V/2AINPUT 4.2V/1.67A; OUTPUT 3.3V/2AINPUT 4.5V/1.46A; OUTPUT 3.3V/2AINPUT 5V/1.4A; OUTPUT 3.3V/2A Input voltage 3.3-5.5V, output 3.3V (deviation ±2.0%)Long time maximum output current 1.8AShort time maximum output current 2.2AUp to 97% efficiency(@4.2V to 3.3V/500MA)Low Quiescent Current:20uAOvertemperature shutdown, input under-voltage protection, External Soft start, and short circuit protection. DC-DC Buck Step-down module …
10Pcs 10ml Metal Needle Empty Plastic Bottle Shisha E Cig Liquid Dropper
$10.80Lab ChemicalsAdd to cartSpecificationsMaterial:PECapacity:10mlSize:20X77mm / 0.79X3.0 inchNeedle Size:Inner Diameter =0.8mm, Outer Diameter =1.2mm, Length=12mmQuantity:10 pcsFeatures1. 10ml empty plastic bottle with metal needle2. Metal needle design,durable and easy to use3. Ideal for storing E cig liquid,solvents, light oils , eye drops, saline, etc.Package included10 X 10ml Empty Plastic Bottle With Metal Needle
Reviews
There are no reviews yet.