GY-AMG8833 IR 8×8 infrared thermal Imager Sensor Array Temperature Measurement Sensor Module with UNO R3 GY-AM Kit
$129.99
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Introduction
This sensor is an 8×8 thermopile array. This means you have a 64-pixel square array, each of which can independently detect temperature. It’s like having a thermal imaging camera (or carnivores’ vision), but with low resolution. It is part of the Qwiic system, so it is easier to connect to obtain low-resolution infrared images.
When connected to your microcontroller (or Raspberry Pi), it will return a set of 64 individual infrared temperature readings via I2C. It’s like those fancy cameras, but compact and simple for easy integration. The AMG8833 is the next-generation 8×8 thermal infrared sensor and provides higher performance than the previous AMG8831. The sensor only supports I2C and has a configurable interrupt pin, which can be triggered when any single pixel is above or below the threshold you set.
The AMG8833 infrared thermal imager sensor temperature measurement range is 0 C to 80 C (32 F to 176 F) with an accuracy of +-2.5 C (4.5 F). It can detect humans from a distance of up to 7 meters (23) feet. The maximum frame rate is 10Hz, which is ideal for creating your own body detector or mini thermal imager. We use this breakthrough code on Arduin0 or compatible (sensors communicate via I2C) or Raspberry Pi using Python. On the Pi, with the help of the image processing of the SciPy python library, we can insert an 8×8 grid and get some very good results!
Parameter
Working voltage (start):1.6V-3.6V
Working voltage (timing):1.5V-3.6V
Current consumption:4.5 mA
8×8 thermopile array
Temperature range:0 C to 80 C (32 F to 176 F)
Accuracy:÷ 2.5 C (÷ 4.5 F)
Human detection distance:7 meters or less (22.966 feet)
I2c address:0x69 (open jumper, default) or 0x68 (close jumper)
Package includes
1 x GY- AMG8833 IR 8×8 infrared camera sensor
1 x UNO R3 board
1 x USB cable
1 x Jumper cable
1 x 8*8 LED board
Weight | 0.147 kg |
---|
Customers Also Viewed
5pcs 1206B 3A PWM DC Motor Speed Controller 6V/12V/24V Speed Regulating Switch Electronic Governor Dimmer
$39.45Motor PWM Speed ControllerAdd to cartDescriptionModel:1206BKVoltage:12VPower mode:DC powerVoltage range:DC 6V-28VCurrent range:Within 3ASwitch function:YesSize:57mm*37mmPackage Included5 x Motor Speed Governor
100W 18V High Efficieny Solar Panel USB DC Monocrystalline Solar Charger for Car RV Boat Battery Charger Waterproof
$105.29Solar PanelAdd to cartFeature– Suitable for campers, boats, houses, gardens, shacks or farms– Provide appropriate power for TVs, laptops, lights, refrigerators and other operating equipment.– Flexible board, lightweight and easy to install.– Suitable for RVs, boats, small spaces or crowded areas.SpecificationSolar panelMaterial:Monocrystalline SiliconSize:510x280x3.0mm/20.08×11.02×0.12inPower:100WOpen Circuit Voltage:18VShort circuit current:2AOutput Voltage:DC 18V&9V, USB 5V, Type-C 5VWaterproof grade:IP65Conversion:23-24%Applicable to:Bicycle, mountaineering, hiking, camping, …
CJMCU-219 INA219 I2C Bi-directional Current Power Monitor Sensor Module
$13.11Sensor & Detector ModuleAdd to cartDescriptionCJMCU-219 module is a with I2C interface Bidirectional current / power monitor integrated circuit (IC), and further expand the energy-saving electronic products TI camp. INA219 with the industry’s highest accuracy and smallest size, not only to monitor the voltage drop across a shunt resistor on the sensing shunt supply voltage, while also computing power. The …
CJMCU-219 INA219 I2C Bi-directional Current Power Monitor Sensor ModuleRead More
Reviews
There are no reviews yet.