Speech Recognition Module Voice Sensor Module Non Specific Voice Recognition Voice Control Module Geekcreit for Arduino Raspberry – products that work with official Arduino Raspberry boards
$76.53
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Feature
1. Using non-specific(SI) speech recognition technology, voice recognition are no special requirements, you can identify the Chinese Mandarin, local dialects and foreign languages.
2. Module has significant anti- noise performance, the 30db, the substantially fully identify 30 to 50 dB more noisy environments, it can be maintained at more than 90% recognition rate.
3. Identify the depth of 32 layers ( can be extended according to user requirements) at depths up to 32 layers can identify phrases 1600, industry-leading.
4. Identify entry way into using pinyin, without programming, to complete the complex zero-based speech recognition technology to provide professional full graphical IDE software settings, easy to use, all settings can be saved project file, suitable for mass downloading.
5. On-board FLASH memory , no SD card, you can add or modify any tone tone for phrases, songs and a variety of sounds, etc., to do a question and answer voice response . All voice by the IDE software can be downloaded quickly.
6. It has a good real-time, end the speech recognition can be obtained within 0.5 second answer.
7. Intelligent settings , you can set timeout identification, identifying state jumps, etc., it can identify subtle adjustment parameters to the module to better adapt to the environment, suitable for complex applications.
8. Rich interfaces, can be RS232 communication , and can also microcontroller TTL232 level communication .
9. Onboard 8 IO interface , status programmable , and can directly drive relay module, the module has been integrated above a relay that can be used to control a large current and voltage.
10. It can be set to trigger recognition mode , you can set the key trigger one-shot or loop.
11. Supports MP3 playback, without external auxiliary devices.
Modules integrated microphone , you can directly access the voice signal.
12. Modules with external audio input interface , you can add a microphone, so that greatly increased recognition distance.
13. Integrated amplifier circuit module can be connected directly to the speaker, the speaker output power interface 550mW, born loud and clear voice.
14. Modules with a stereo headphone jack, can connect headphones or external amplifier, suitable for high-power applications require more.
15. DC 3.3-16V wide voltage power supply
NOTE
Do not connect to downloader when module has connected to external power supply.
Package Included
1 x Speech Recognition Module Voice Module
1 x USB Downloader
1 x Microphone Module
1 x Horn
1 x Relay
1 x Adapter Module
Weight | 0.126 kg |
---|
Customers Also Viewed
5pcs RS232 to TTL Serial Converter Module DB9 Connector MAX3232 Serial Module with Cable
$21.38Converter BoardAdd to cartFeatureIt is widely used in radio modification, phone flash, GPS, vehicle detection, DVD flash, hard disk repair set-top box upgradeIt can be used to program STC MCU, NXP MCU, Renesas MCU, STM32 MCU, N+-2EC MCU CommunicationPort:TX RX VCC GNDChip:domestic MAX3232Package includes5 x Serial Module5 x Cable
Original JYETech 13805K DSO138mini DIY Digital Oscilloscope Kit SMD Pre-soldered with Case
$37.91DIY Electronic KitsAdd to cartDSO138mini brings in the following improvementsBetter structure and smaller size. The bulky pin-headers connecting the LCD and main board in old DSO138 has been eliminated. The soldering of these pin-headers has being found problematic for beginners.USB or battery powered. This makes the scope much more convenient to be used as a portable device. New version …
Original JYETech 13805K DSO138mini DIY Digital Oscilloscope Kit SMD Pre-soldered with CaseRead More
CJMCU-2112 CP2112 Evaluation Sensor for CCS811 Debugging Board USB to I2C Communication Converter Module
$16.67Sensor & Detector ModuleAdd to cartFeatureDirect connection to PC via USBDirect connection to host system via I2CSimple software GUI for easy setup and data loggingDetermine the effects of Temperature & HumidityIntelligent algorithms to output TVOC / eCO2 levelsPackage includes1 x Sensor Module
3 Pcs Red Acrylic Wall Mounted Protective Case Support Cooling Fan for Raspberry Pi 4 Model B
$35.10Raspberry Pi & Orange PiAdd to cartDescription– Wall Mounting Available– Red Blue Black Optional– Support Adding Cooling Fan– Compatible With Raspberry Pi 4B– Make of Transparent Acrylic, could check the board status easilyThere is a Protective Film on the board surface, please take it off before using.Package Included3* RED Acrylic Case Kit
5pcs CTS DTR USB Adapter Pro Mini Download cable USB to RS232 TTL Serial Ports CH340 Replace FT232 CP2102 PL2303 UART TB196
$23.80Converter BoardAdd to cartFeatures– This product use CH340 chips, stable performance, fully compatible with USB1.1,USB2.0,USB3.0 , baud rate up to 256 kbps; – Uses:Replace FT232 for Arduiuo Pro Mini Download – With receiver indicator,transmitter indicator, and power indicator.– Chip:CH340C– Compatible with PRO MINI download port– Board size:18mm x 30mm(Does not include USB ports and pins)– Supports the following …
10Pcs XH Pitch 2.54mm Single Head 4Pin 4Way Wire To Board Connector 15cm 24AWG with Socket
$6.55Electronic Accessories & SuppliesAdd to cartFeatureType:XH2.54 Single Head WirePin Number:4 PinWire Gauge:24AWG Pitch:2.54mmLength:15cmQuantity:10 Sets(10Pcs Single Head Wire + 10Pcs Socket )Note:the cable color may have different.Package included10 x XH2.54 Single-Head 4Pin 4Way Wire To Board Connector10 x Socket
2.4G Wireless Remote Control Module Transmitter and Receiver Module Kit Transmission Reception Communication 6 Channel Output
$8.26Smart ModuleAdd to cartTY24D-TX is the transmitting module, TY24D-RX is the receiving module. The transmitting module only needs to provide 3.3V power supply and transmitting button and one LED as the transmitting status indication. The output port corresponding to the receiving module can output the level signal, and the module has the output status. Select to select the …
2M*45cm Window Film Privacy Static Cling Stained Glass Sticker Home office Decor
$30.50PlasticsAdd to cartSpecificationsMaterial:PVCSize:45cm X 200cmFeatures– Energy-saving and environmental protection. No gum paste, paste can be repeated.– Deadening UV intrusion, protecting indoor objects fading and aging.– Filter light and reduce glare, protect the skin and vision.– Easy to mount and clean.How to use1. First clean the surface of the pasting position, pasting surfaces should be smooth, not be …
2M*45cm Window Film Privacy Static Cling Stained Glass Sticker Home office DecorRead More
Reviews
There are no reviews yet.