1000*515*3MM Flexible Solar Panel Cell Module Kit for 12V/24V RV/Car/Boat Waterproof
$182.24
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Description
Technology:ETFE Technology
Colour:Black
Single Crystal Power:200W
The Output Voltage:18V
Size:1000 * 515 * 3MM
Working Current:4.95A
Working Temperature:20 → – + 70 →
Process Material:ETFE + EVA + CELLS + EVA + TPT + EVA + TPT
Power Generation:Garage power generation 12V system (connecting 2 boards together can be used for 24V system)
Features
-Waterproof special cable, with sealing joint.
-Light and bendable, 30 bending for components.
-Imported frosted surface, more than 15 years aging life.
-Waterproof junction box with diode protection to prevent short-circuit and countercurrent lightning overpressure.
The ETFE surface is resistant to dirt and easy to clean; 3mm thickness is ultra-thin and flexible; UV-resistant and anti-aging; light transmittance is up to 95%.
Car Roof Installation Method
1. Use 3M double-sided foam adhesive with high temperature resistance and strong adhesion to the back of the solar panel, and then stick it to the position where the car roof is to be installed.
2. Paste with solar special sealing silicone (high temperature resistance, anti-aging, and stick to firm).
3. To install solar panels on the car roof, the wire should be introduced into the car. The wire can be inserted from the place where there is a gap on the outside of the car. You can enter the car from any closed place on the car roof (doors, sunroof, travel warehouse, starting compartment).
4. It can be directly connected to the battery in the starting compartment of the car.
5. Connected to the lighter. Note:Some car key switches lock the lighter and the power is turned on, and the car key cannot be charged to the battery from the lighter.
6. Just connect the bulb wire in the car or other wires connected to the battery.
Package included
1 * Flexible Solar Panel Photovoltaic Panel
Note
1.If you have any problems or concerns, please contact us.
2.Please allow 1-3cm measuring deviation due to manual measurement.Thanks for your understanding.
3.Monitors are not calibrated same, item colour displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
4. Even if the solar panel is bendable, please do not over bend it to damage it with a rabbit
5. It is recommended to keep the solar panel clean and dry during use to achieve the best power generation efficiency.
Weight | 2.6 kg |
---|
Customers Also Viewed
5pcs RS232 to TTL Serial Converter Module DB9 Connector MAX3232 Serial Module with Cable
$21.38Converter BoardAdd to cartFeatureIt is widely used in radio modification, phone flash, GPS, vehicle detection, DVD flash, hard disk repair set-top box upgradeIt can be used to program STC MCU, NXP MCU, Renesas MCU, STM32 MCU, N+-2EC MCU CommunicationPort:TX RX VCC GNDChip:domestic MAX3232Package includes5 x Serial Module5 x Cable
Original JYETech 13805K DSO138mini DIY Digital Oscilloscope Kit SMD Pre-soldered with Case
$37.91DIY Electronic KitsAdd to cartDSO138mini brings in the following improvementsBetter structure and smaller size. The bulky pin-headers connecting the LCD and main board in old DSO138 has been eliminated. The soldering of these pin-headers has being found problematic for beginners.USB or battery powered. This makes the scope much more convenient to be used as a portable device. New version …
Original JYETech 13805K DSO138mini DIY Digital Oscilloscope Kit SMD Pre-soldered with CaseRead More
CJMCU-2112 CP2112 Evaluation Sensor for CCS811 Debugging Board USB to I2C Communication Converter Module
$16.67Sensor & Detector ModuleAdd to cartFeatureDirect connection to PC via USBDirect connection to host system via I2CSimple software GUI for easy setup and data loggingDetermine the effects of Temperature & HumidityIntelligent algorithms to output TVOC / eCO2 levelsPackage includes1 x Sensor Module
3 Pcs Red Acrylic Wall Mounted Protective Case Support Cooling Fan for Raspberry Pi 4 Model B
$35.10Raspberry Pi & Orange PiAdd to cartDescription– Wall Mounting Available– Red Blue Black Optional– Support Adding Cooling Fan– Compatible With Raspberry Pi 4B– Make of Transparent Acrylic, could check the board status easilyThere is a Protective Film on the board surface, please take it off before using.Package Included3* RED Acrylic Case Kit
5pcs CTS DTR USB Adapter Pro Mini Download cable USB to RS232 TTL Serial Ports CH340 Replace FT232 CP2102 PL2303 UART TB196
$23.80Converter BoardAdd to cartFeatures– This product use CH340 chips, stable performance, fully compatible with USB1.1,USB2.0,USB3.0 , baud rate up to 256 kbps; – Uses:Replace FT232 for Arduiuo Pro Mini Download – With receiver indicator,transmitter indicator, and power indicator.– Chip:CH340C– Compatible with PRO MINI download port– Board size:18mm x 30mm(Does not include USB ports and pins)– Supports the following …
10Pcs XH Pitch 2.54mm Single Head 4Pin 4Way Wire To Board Connector 15cm 24AWG with Socket
$6.55Electronic Accessories & SuppliesAdd to cartFeatureType:XH2.54 Single Head WirePin Number:4 PinWire Gauge:24AWG Pitch:2.54mmLength:15cmQuantity:10 Sets(10Pcs Single Head Wire + 10Pcs Socket )Note:the cable color may have different.Package included10 x XH2.54 Single-Head 4Pin 4Way Wire To Board Connector10 x Socket
2.4G Wireless Remote Control Module Transmitter and Receiver Module Kit Transmission Reception Communication 6 Channel Output
$8.26Smart ModuleAdd to cartTY24D-TX is the transmitting module, TY24D-RX is the receiving module. The transmitting module only needs to provide 3.3V power supply and transmitting button and one LED as the transmitting status indication. The output port corresponding to the receiving module can output the level signal, and the module has the output status. Select to select the …
2M*45cm Window Film Privacy Static Cling Stained Glass Sticker Home office Decor
$30.50PlasticsAdd to cartSpecificationsMaterial:PVCSize:45cm X 200cmFeatures– Energy-saving and environmental protection. No gum paste, paste can be repeated.– Deadening UV intrusion, protecting indoor objects fading and aging.– Filter light and reduce glare, protect the skin and vision.– Easy to mount and clean.How to use1. First clean the surface of the pasting position, pasting surfaces should be smooth, not be …
2M*45cm Window Film Privacy Static Cling Stained Glass Sticker Home office DecorRead More
Reviews
There are no reviews yet.