1000*515*3MM Flexible Solar Panel Cell Module Kit for 12V/24V RV/Car/Boat Waterproof
$182.24
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Description
Technology:ETFE Technology
Colour:Black
Single Crystal Power:200W
The Output Voltage:18V
Size:1000 * 515 * 3MM
Working Current:4.95A
Working Temperature:20 → – + 70 →
Process Material:ETFE + EVA + CELLS + EVA + TPT + EVA + TPT
Power Generation:Garage power generation 12V system (connecting 2 boards together can be used for 24V system)
Features
-Waterproof special cable, with sealing joint.
-Light and bendable, 30 bending for components.
-Imported frosted surface, more than 15 years aging life.
-Waterproof junction box with diode protection to prevent short-circuit and countercurrent lightning overpressure.
The ETFE surface is resistant to dirt and easy to clean; 3mm thickness is ultra-thin and flexible; UV-resistant and anti-aging; light transmittance is up to 95%.
Car Roof Installation Method
1. Use 3M double-sided foam adhesive with high temperature resistance and strong adhesion to the back of the solar panel, and then stick it to the position where the car roof is to be installed.
2. Paste with solar special sealing silicone (high temperature resistance, anti-aging, and stick to firm).
3. To install solar panels on the car roof, the wire should be introduced into the car. The wire can be inserted from the place where there is a gap on the outside of the car. You can enter the car from any closed place on the car roof (doors, sunroof, travel warehouse, starting compartment).
4. It can be directly connected to the battery in the starting compartment of the car.
5. Connected to the lighter. Note:Some car key switches lock the lighter and the power is turned on, and the car key cannot be charged to the battery from the lighter.
6. Just connect the bulb wire in the car or other wires connected to the battery.
Package included
1 * Flexible Solar Panel Photovoltaic Panel
Note
1.If you have any problems or concerns, please contact us.
2.Please allow 1-3cm measuring deviation due to manual measurement.Thanks for your understanding.
3.Monitors are not calibrated same, item colour displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
4. Even if the solar panel is bendable, please do not over bend it to damage it with a rabbit
5. It is recommended to keep the solar panel clean and dry during use to achieve the best power generation efficiency.
Weight | 2.6 kg |
---|
Customers Also Viewed
Multiple Car Toys Magnetic Puzzle Box Book Educational Book Kids Learning Gift
$52.64MathematicsAdd to cartPackage included10 x Card76 x MagnetsFeatures1.Developing kids’ intelligence.2.Teaching kids to know more words.3.Easy for storage.SpecificationsColor:MulticolorMaterial:Paperboard, MagnetismSize:30x4x21.5cm
Basic Starter Kit UNO R3 Mini Breadboard LED Jumper Wire Button with Box for Geekcreit for Arduino – products that work with official Arduino boards
$18.62Module KitsAdd to cartDescriptionsPerfect for Shield Prototyping and TestingPlastic housing, metal contact clipsAccept wire with diameter 20-29AWGVolatge/current:300V/3-5A400 tie-point2 Power Lanes, Tie-point 1001 Double-strip, Tie-point 300Solderless Breadboard Size:82x55x8.5mmPackage included1 x Uno R3 Development Board1x 400 hole Breadboard10 x 220Ω resistor 5% carbon film10 x 1k resistor 5% carbon film10 x 10k resistor 5% carbon film10 x 100k resistor 5% …
3pcs ESP32-S WiFi + Bluetooth ESP32S Serial to WiFi Dual Antenna Module
$29.27Smart ModuleAdd to cartDescriptionThe main chip uses a low-power dual-core 32-bit CPU with a frequency of up to 240MHz and computing power of up to 600DMIPS.Default 32Mbit SPI Flash, 520KB SRAMSupport SoftAP and Station modeUltra-small 802.11b/g/n Wi-Fi + BT/BLE SoC moduleSupport UART/SPI/I2C/I2S/PWM/ADC/DAC, etc.Support for firmware upgrade (FOTA)Antenna supports onboard antenna or IPEX block outputPackage includes3 x Wifi module
Geekcreit 433MHz DC 12V 10A Relay 1CH Channel Wireless RF Remote Control Switch Transmitter with Receiver
$15.30Smart ModuleAdd to cartIf you need more Transmitter, please buy Product ID:1215079>>>Manual:Click here to openFeaturesEasy to install and easy to carryWith a slidable cover on the remote controlWith a hook on the remote controlUse Learning coding, stable and reliableThe wireless signal can pass through walls, floors and doorsYou can turn on or turn off the receiver with transmitter …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStream
$56.69Electrical Pump & ValveAdd to cartFeature*CO2 Refill Adapter is used to fill CO2 into your Sodastream tank.*Adjustable valve pin ensures compatibility with any cylinder valve variation.*Easy to install and use.*Made of high quality metal, high hardness and durable.Specification*Material:Metal*Color:Silver (As Pictures Show)*Inner Thread:TR21-4*Outer Thread:W21.8-14Package Contents1*CO2 Refill AdapterNotes:The real color of the item may be slightly different from the pictures shown on …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStreamRead More
30pcs 2.5-5.5V TTP223 Capacitive Touch Switch Button Self Lock Module
$15.15Other Module BoardAdd to cartFeatures 1. Size:15*11mm 2. Power:2.5-5.5V 3.Trigger setting mode:(1->Short;0->No Short) AB=00:No-lock High TTL level output; AB=01:Self-lock High TTL level output; AB=10:No-lock Low TTL level output; AB=11:Self-lock Low TTL level output; Package included 30 x 2.5-5.5V TTP223 Capacitive Touch Switch Button Self-Lock Module For
NE555 Pulse Module LM358 Duty and Frequency Adjustable Square Wave Signal Generator Upgrade Version
$6.55Test & Measuring ModuleAdd to cartFeature1. Used as a square wave signal generator to generate square wave signals for experimental development.2. Used to generate a square wave signal that drives the stepper motor driver.3. Generate adjustable pulses for use by the MCU.4. Generate adjustable pulses to control the associated circuitry.Description1. Size:3.5CM * 4.6CM1. The main chip:LM358;2. Input voltage:5V-12VDC.3. Input current:≥100MA;4. …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module Kit
$13.73DIY Electronic KitsAdd to cartFeatureModel:AUL-10Supply voltage:DC9V-12VAudio input:0~1.5VrmsPCB size:66 x 28mm (L x W)Light row size:62.5 x 5 x 10.7mm (L x W x H)Two indication modes:bar indication and fire spot indication (Realized by MOD short-circuit point)Lamp row offers two kinds of vertical and horizontal installationTin-treated solder padsNote:Before power on, please confirm the polarity of the power supply is correct …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module KitRead More
Reviews
There are no reviews yet.