2500W 50A ZVS induction Heating Module High Frequency Heating Machine Melt Metal + 48V Coil
$216.66
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
If you want to buy 1000W 20A ZVS Induction Heating Machine:>>>Click here
Update information:The old version of the cooling fan is powered directly from the motherboard through the buck module, and is now powered by the AC100-220V power adapter. (From April 9, 2019)
The new version is update to adds supporting water pump and supporting insulation sleeve for copper ring. (From November 22, 2019, CN warehouse)
Introduction
This version is a 2500W upgrade of the 1800W ZVS heating module, using an oversized PCB layout design and an oversized heat sink for heat dissipation.
Good power, self-contained cooling fan interface, can also do Tesla discharge, mark generator, high voltage inverter power supply, etc.
This product can work continuously for several hours under good heat dissipation conditions.
Feature
This induction heating circuit uses a 12-48V low-voltage DC power supply with a maximum current of 50A and a maximum power of 2500W. Continuous operation under conditions of good heat dissipation. Because of its moderate power, it can be used for DIY players to quench, annealing and other heat treatment of small parts. It can also be used with graphite crucible to smelt gold, silver, copper, aluminum and other metals. The heating is even and fast, very convenient.
Product parameters
Product size:240 x 120 x 105mm
Input voltage:12V-48V recommended above 36V
Power requirements:less than 12V ◎ 20A 15V or more ◎ 30A
Maximum power:2500W
Maximum current:50A
Heater ring inner:70mm (Recommended crucible + quartz suit, maximum support of 58mm crucible)
Recommended power:Product ID:1279188
Note
1. The power of heating is very large, except that the plate and components are hot, and the heat of copper tube is very high. The buyer can prepare water cooling system separately, can buy a small water pump and 2 meters of inner diameter of 4mm rubber hose.
2. You must pay attention to when using switch power supply, because the high-power switching power supply usually have soft start function, namely the output voltage is slowly rising, and if the voltage rise to 10V before connected induction heating circuit will be caused by lacking voltage lead to circuit can’t afford to vibrate, so that the two MOS tube conduction and burned components at the same time, so be sure to switch the power supply voltage stability and then access the induction heating circuit.
3. When heating the metal objects do not to heat too large metal, otherwise it may be overloaded with power, please add a 45A fuse or ammeter and air switch will be better. (package does not inclues)
4. Although this drive plate can withstand more than 50A current, but it is recommended that not exceed 48V 45A to prevent accidents and damage.
5. Package comes with heating circle diameter is 60 mm, design voltage is 36V, if you use more than 40 voltage power supply shall be used for inner diameter 70 mm above diameter heating ring, water pump use 12V dc power supply, please use separate power supply voltage regulator module to avoid burn out fan and water pump.
6. The minimum input voltage of the module is 12V, it doesn’t mean all the 12V power supply can be used, some novice buyers may use a smaller power supply. This module has specific voltage and current requirements, the voltage 12V current must be more than 10A power supply can be used, if the power is too low will lead to the power output is greatly reduced, when the voltage is lower than 12V, it will lead to two MOS at the same time conduction, will burn MOS tube;
7. If you find that the MOS tube fever, then the first thing to consider whether the power output meets the requirements.
8. Do not empty the board, otherwise it will issue a very high frequency of noise, and then MOS tube will burn out
9. Induction heating is recommended to use 36V 20A power supply, 12V power supply is too small heating almost no response, and 12V power supply easily lead to the power supply output voltage decreases, below 12V is very dangerous
10. Induction heating power is great, so fever is normal, be sure to do a good job of cooling.
11. Induction heating, the power recommended more than 48V 50A switching power supply. More than 24V power supply, then more than 20A power supply, the greater the voltage, the greater the current, the greater the heating power, heating faster.
Package includes
1 x PCB board
1 x 48V copper tube
Weight | 2.03 kg |
---|
Customers Also Viewed
18v 15w 410mm*200mm*3mm Semi-flexible Solar Panel with Cable for off-road Vehicle Outdoor Working
$62.25Smart Robot & Solar PanelAdd to cartFeatures– Durable with PET backsheet, no glass.– Unique frameless design includes 4metal reinforced mounting holes for easy installation– Light weight,easy carrying,easy shipment,easy installation.– Thin:the thickness is only 3mm, easy joint to your yacht or RV roof , boat etc.– Solar energy conversion rate up to 19.6-20%– Rounding corners to prevent from being scratched.Hardening process surface …
RX HF 1-50MHz Durable Portable Antenna Splitter Radio Communication BNC Connectors Home Professional Metal
$29.96Other Module BoardAdd to cartFeaturesHF Antenna RX splitter has one antenna port and two receivers ports.Frequency range:100kHz-50 Mhz. Impedance (I/O)-50 Ohm.SpecificationsMaterial:Metal, PlasticColor:As ShownTypes:Finished ProductFrequency range:100kHz-50 MhzImpedance (I/O)-50 OhmAverage port to port isolation measured-36 dBAverage signal attenuation(loss)-3.2 dBConnectors type-BNCSize:(Approx) 150*150*50mmPackage Included1 x Antenna Splitter RX HF 1-50 MHz
3Pcs DIY LED Lamp Kit LED Flash Set Electronic Production Kit
$30.16DIY Electronic KitsAdd to cartFeatureKit Model:LSD-73Dimensions:100 * 80mmWorking voltage:DC4-5VPackage weight:55 gramsNote:This is a DIY kit, you need to assemble it, to get the installation document.Package includes3 x DIY LED Lamp KitSoldered PCB, for reference only!
12V 300W Portable Diesel Fuel Oil Transfer Pump Self Priming Oil Pump 50L/Min
$200.46Electrical Pump & ValveAdd to cart12V Portable Fuel Diesel Pump Oil Transfer Pump Self Priming 50L/Min 300WSpecificationsMaterial:Pure copper motor + cast ironQuantity:1 setLift distance:15mAbsorbing distance:5mRotate Speed:5000R/minFlow Rate:50L/minVoltage:12VPower:300WProduct dimension:20cm x 14cm x 10cm (Approx.)Package size:30 x 16 x 17cm(Approx.)Used for pumping, oil, kerosene and diesel oil.Not suitable for petrol.Features-Self priming.-Low working noise.-Powerful 12Volt 300W motor.-With handle so it is easy to …
12V 300W Portable Diesel Fuel Oil Transfer Pump Self Priming Oil Pump 50L/MinRead More
5Pcs Geekcreit 36 Value Electronic Components Storage Assortment Box
$84.81Electronic Accessories & SuppliesAdd to cartDescriptionFormat size of this electronic components assortment box can be assembled arbitrary, varies of intervals designed to facilitate access to small parts and store, pick parts very easy.Specification36 value:27.0 x 17.5 x 4.5cmPackage included5 x Electronic components assortment box
5Pcs GPIO Pin Reference Board for Raspberry Pi 2 Model B & Raspberry Pi B+
$17.24Raspberry Pi & Orange PiAdd to cart5Pcs GPIO Pin Reference Board For Raspberry Pi 2 Model B & Raspberry Pi B+FeatureCompatible with Raspberry Pi 2 Model B & Raspberry Pi B+Material:PCBWith marked you can easily distinguish all leads of GPIODimensions:5.3 cm x 1 cm x 0.1 cmPackage included5 x GPIO Pin Reference Board
Plantower PMS7003 G7 PM2.5 Sensor Laser Particle Sensor Detector Air Quality Tester
$56.85Sensor & Detector ModuleAdd to cartFeatureParameter:Index:UnitParticulate matter measurement range:0.3 ~ 1.0; 1.0 ~ 2.5; 2.5 ~ 10:Micrometer (um)Particle counting efficiency:50% @ 0,3 microns 98% @> = 0.5 micronsEffective range of particulate matter concentration (PM2.5 standard value):0-500:Μg / m3Particulate matter concentration resolution:1:Μg / m3Particulate matter concentration consistency (PM2.5 standard value) *:± 10% @ 100 ~ 500μg / m3± 10 μg / …
Plantower PMS7003 G7 PM2.5 Sensor Laser Particle Sensor Detector Air Quality TesterRead More
Reviews
There are no reviews yet.