DIY Electronic Kit Rechargeable FM Stereo Digital Radio DIY Parts
$23.52
Style #1 / Style #2 / Style #3 / Style #4 /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1.Use advanced digital audio signal processing technology (DSP) and FM phase-locked loop modulation technology (PLL) to make the sound quality more realistic, the performance more stable, and the long-term working frequency has no deviation
The reception signal is good, 22 stations can be received locally.
2. LCD display is more intuitive and accurate, with extremely low power consumption and minimal noise interference.
3. It has the functions of automatic search and storage of radio stations, easy to operate and use.
4. Built-in 30-level digital volume adjustment, key operation can be easily completed.
5.Automatically memorize the data before the power failure.
6.Using quartz crystal for frequency stabilization, the emission frequency will no longer drift when the temperature changes.
7. Full frequency band (76-108MHZ) automatically search for signal frequency band and store memory.
8.Built-in rechargeable lithium battery and charging circuit, it can be charged with a mobile phone charger, the blue light is on when charging, and the light is off when it is full.
Specification
PCB board size:7.1CM*3.6CM
Shell size:8.2CM*4.9CM*2.0CM
Support headset:in-ear headset
Output power:500mW (drive earphone)
Frequency response range:50Hz-18KHz
Channel:stereo
Receiving frequency adjustment range
Turn off campus radio 87.0MHz-108.0MHz, turn on campus radio 76.0MHz-108.0MHz
Equivalent noise:◎30dB
Supply voltage:3.0V-5.0V
Current:40mA
Battery size:5x20x30 (thickness X width X length)
Package battery capacity:250MAH, it can be used for about 4-5 hours when fully charged.
Style:1:Parts + shell 2:Parts + shell + earphone 3:Finished product + shell
4:Finished product + shell+ earphone
Note
Do not touch the back components of the module when working, so as not to affect the normal operation of the module or cause a short circuit to burn the module.
This module is a radio sensitive device. Interference from the power supply or nearby may affect the normal operation of the module.
Therefore, it is recommended to use a battery or a power frequency transformer to obtain a stable voltage obtained by stabilizing the power supply for the module. Cannot use switching power supply
(Such as mobile phone chargers, and any other switching power supplies), power banks, and no working Class D amplifiers, microwave ovens and other equipment are nearby.
Otherwise, the interference generated by these devices will affect the receiving effect of this module. Those who buy the module and develop it by themselves, please pay attention.
Instructions for use
After each module is completed, the channel will be searched automatically first. Long press ‘Auto Search (AUTO key)’ to start automatic search and store the radio stations that can be listened to,
After the search is completed, the first station P01 will be played automatically. The user can press the ‘previous station’ or ‘next station’ button to switch the searched station.
This module can set the backlight state and whether to listen to the campus broadcast frequency band according to the user’s specific usage. The setting method is as follows.
When the power is off, press and hold the VOL+, VOL- button and power on the LCD display C1 to turn on the campus broadcast C0 to turn off the campus broadcast band, and the settings will take effect after restarting.
To set the backlight state, press and hold the up and down radio buttons at the same time when the power is off. B1 indicates that the backlight is always on, and B0 indicates that the backlight is turned off for 20 seconds. The settings will take effect after restarting. Change the setting status and repeat this step to switch. The factory unified setting is not to turn on the campus broadcast frequency band, and the backlight goes out for 20 seconds without operation.
Pakage included
1 x PCB board
1 x Audio stand
6 x 6*6*14 button
1 x USB MICOR socket (fixed feet are plug-ins)
1 x 12D07 side switch
2 x TP4054
3 x 104 monolithic capacitor
2 x 10K resistor
1 x 510 ohm resistor
1 x 3MM LED white hair blue
1 x Radio module
Weight | 0.069 kg |
---|
Customers Also Viewed
HS-48B Set 600PCs Cold-pressed Assorted Crimp Terminal Para Fio Combination Plug Spring Boxed Connector Cross Wire Crimping Tool
$18.21Electronic Accessories & SuppliesAdd to cartPackage Included6.3mm:0.75-1.5mm2 / AWG 20-16;50 pieces male and 50 pieces female50 pieces each protective cover for male and female4.8mm:0.75-1.5mm2 / AWG 20-16;50 pieces male and 50 pieces female50 pieces each protective cover for male and female2.8mm:0.5 – 1.0 mm2 / AWG 22-18;50 pieces male and 50 pieces female50 pieces each protective cover for male and …
Geekcreit 315/433MHz DC12V 10A 1CH Single Channel Wireless Relay RF Switch Receiver Board with Case
$17.48Relay ModuleAdd to cartSpecification1. Input Voltage:DC10-14V2. Standby Current3. RF Frequency:315/433MHz (optional)4. RF Working mode:Super heterodyne receiver5. Receiver Sensitivity:>97dBm6. Remote Control Distance:>100 meter(In open environment)7. Decoding Way:MCU Software decoding8. Can store the number of remote control:509. Support remote control type:Fixed code, learning code10. Channel:1CH11. Multiple working modes:(Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched,Delay off)12. Wiring Method:Fixed wiring terminal13. Working Voltage:DC12V14. Output Current:10A15. …
OPEN-SMART DC Jack Power 7~12V to DC5V/3.3V Step Down Converter Voltage Regulator Power Supply Module for Breadboad
$6.55Power Supply ModuleAdd to cartDescriptionThis is a mini LDO step-down power module based on AMS1117-5.0 and AMS1117-3.3, and it output fixed 5V / 3.3V.It is a small size, lightweight, especially for model airplanes, smart cars, DIY and other items, PCB experiment board project design, breadboard project design.Features– Module type:LDO step-down module;– Onboard 500mA resettable fuse to protect the power …
offline Version 1610 PRO 3 Axis CNC Router GRBL Control DIY Adjustable Speed Spindle Laser Motor Wood Engraving Milling Machine
$346.06Laser Engraving MachineAdd to cartThe software and instruction please:https://drive.google.com/openid=1JXQbBj-CuYee53yvQESx5HsVRhJ59VTDSpecification:Rated Voltage:24VEngraving area:16x10x4.5cmSpindle:775 spindle motorSoftwear:GRBL control systemssupport system:24V 5.6A adapterStepper motor:fuselage length 34MM,Current 1.33A, 12v.Torque 0.25N/MSpindle:775 spindle motor (12-36V) 24V:10000r / minSupported System:Windows XP / Win 7 / Win 8 / Win 10 / Linux.Drill bits:tip 0.1mm ,20 degree , diameter3.175mm. the package include 10pc.clamps:4 pcs, Hold the thickness of 0-30mm,size:50 …
3Pcs NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal Generator
$8.13Test & Measuring ModuleAdd to cart3Pcs NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal GeneratorFeatures1. As a square wave signal generator,generates a square wave signal used for experimental development.2. Used to drive a stepper motor for generating a square wave drive signal.3. Generate adjustable pulse for MCU.4. Generate adjustable pulse,to control circuitry associated.5. Size:31mm x 22mm6. Main chip:NE5557. …
3Pcs NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal GeneratorRead More
PiFi HIFI DAC+ Digital Audio Card Pinboard for Raspberry Pi 3 Model B /2B/B+/A+
$40.49Raspberry Pi & Orange PiAdd to cartPiFi HIFI DAC+ Digital Audio Card Pinboard For Raspberry Pi 2 Model B / B+ / A+DescripionIt’s suitable for Raspberry pi B+. You can setup a open music player by Volumio systemPackage included1 x Digital Audio Card Pinboard
12V 20W 45CM x 35CM PolyCrystalline Solar Panel with Alligator Clip Wire
$123.28Smart Robot & Solar PanelAdd to cart12V 20W 45CM x 35CM PolyCrystalline Solar Panel With Alligator Clip WireFeatures20W 12V PolyCrystalline Cells Solar Panel High efficiency and excellent performanceProvided with 2 alligator clips and 4m cableSuitable for a variety of equipments, emergency lights, advertising lights, traffic lights, electric fans, solar water pumps, motorbike, boat, etc..Power:20WVoltage:12VMaterial:PolyCrystalline Weight:415g Dimensions:45cm x 35cm (LxW)Cable Length:Approx. 4mPackage …
12V 20W 45CM x 35CM PolyCrystalline Solar Panel with Alligator Clip WireRead More
CJMCU-231 Pedometer Sensor Module Triaxial Accelerometer KX023-1025 FIFO FILO
$9.68Sensor & Detector ModuleAdd to cartInstructions:http://files.hobbyant.com/2018/06/CJMCU-23-TEST.zipChip FeatureDigital High-Pass Filter OutputsEmbedded FIFO/FILO bufferLow Power Consumption with FlexSet™ Performance OptimizationInternal voltage regulatorEnhanced integrated Directional Tap/Double-TapTM, and Device-orientation AlgorithmsUser-configurable wake-up functionDigital I2C up to 3.4 MHzDigital 3-wire and 4-wire SPI up to 10 MHzLead-free SolderabilityExcellent Temperature PerformanceHigh Shock SurvivabilityFactory Programmed Offset and SensitivitySelf-test FunctionPackage includes1 x Pedometer Sensor Module
Reviews
There are no reviews yet.