XY-DJ01 DC6-30V 30A 1CH Digital Display Relay Module Delayed Power off Trigger Delay Cycle Timing Circuit Switch Rail Type
$26.88
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. With LCD display, the current mode and parameters are clear at a glance, very clear, simple and practical;
2. Support button trigger control, high and low level trigger, switch value control, support NPN, PNP sensor access, suitable for most occasions;
3. Wide voltage supply (6~30V),Rail installation, very convenient to use;
4. There is a key pausing function, with reverse connection protection, reverse connection does not burn;
5. Added sleep mode. After enabling, without any operation for about 5 minutes, the LCD backlight will be automatically turned off; any key to wake up;
6. Different OP, CL, LOP parameters can be set, these parameters are independent of each other and saved separately;
7. All set parameters are automatically saved after power-off.
Operating mode
P0:After the signal is triggered, the relay is turned on for OP time, and then off; within the OP time, the signal is triggered again invalid
P1:After the signal is triggered, the relay is turned on for OP time and then off; within the OP time, the signal is triggered again to re-timing
P2:After the signal is triggered, the relay is turned on for OP time and then turned off; within the OP time, the signal triggers reset again, the relay is turned off, and the timing stops
P3:After the signal is triggered, the relay is turned off for CL time, and then the relay is turned on;
P4:After the trigger signal is given, the relay is turned on for OP time, the relay is disconnected for CL time, and then the above actions are cycled, the signal is given again in the cycle, the initial state is restored, and the timing is stopped; the number of cycles (LOP) can be set; the cycle ends, keep the relay off ;
P5:Give the trigger signal, after the relay is disconnected from the CL time, the relay will be turned on for OP time, and then cycle the above actions, give the signal again in the cycle, restore the initial state, and stop timing; the number of cycles (LOP) can be set; the cycle ends, keep the relay on ;
P6:After power-on, no trigger signal is needed, the relay is on for OP time, the relay is off for CL time, and the above actions are cycled; the number of cycles (LOP) can be set; the cycle is over, keep the relay off;
P7:There is no need to trigger signal after power-on, the relay is off CL time, the relay is on OP time, and the above actions are cycled; the number of cycles (LOP) can be set; the cycle ends and the relay is kept on;
P8:Signal hold function If there is a trigger signal, the timer is cleared and the relay remains on; when the signal disappears, the relay is disconnected after timing OP; during the timing, there is a signal again, and the timer is clear;
P9:Signal hold function If there is a trigger signal, the timer is cleared and the relay remains off; when the signal disappears, the relay is turned on after timing CL; during the timing, there is another signal, and the timer is cleared;
(P0~P7) mode, short press the pausing button, when the system does not trigger the timing, the system starts timing; when the system is already timing, the system pauses timing, the relay is disconnected, and flashes ‘OUT’ as a reminder;
In P8 P9 mode, the pausing button on the running interface is used as the trigger signal, and its button function is disabled by short press/long press;
Product parameter
Working voltage:6-30V power supply
Trigger signal source:high level trigger (3.0V~24V), low level trigger (0.0V~0.2V), switch control (passive switch).
Output capacity:can control equipment within DC 30v 30A or AC 220v 30A
Quiescent current:15mA
Working current:50-130mA
Service life:more than 100,000 times;
Working temperature:-40-85→;
With optocoupler isolation, enhanced anti-interference ability, industrial-grade circuit board, set parameters are always remembered after power failure.
Timing range
0.01 second (minimum) ~ 9999 minutes (maximum) continuously adjustable
How to choose the timing range
In the OP/CL parameter modification interface, short press the pausing button to select the timing range;
XXXX No decimal point, timing range 1 second~9999 seconds
XXX.X The decimal point is in the tenth place, and the timing range is 0.1 seconds to 999.9 seconds
XX.XX The decimal point is in hundreds, and the timing range 0.01 seconds to 99.99 seconds
X.X.X.X All decimal points are lit, timing range 1 minute to 9999 minutes
For example, if you want to set the OP to 3.2 seconds, move the decimal point to the tens place, and the LCD will display 003.2
Parameter description:OP on time, CL off time, LOP cycle times (1-9999 times, ‘—-‘ represents infinite cycles)
parameter settings
a) Enter the setting interface by long pressing the setting button;
b) First set the work mode, the work mode flashes to remind, short press the increase/decrease button to set the work mode;
c) Short press the setting button, select the working mode, and enter the system parameter setting;
d) In the system parameter setting interface, short press the setting button to switch the system parameter to be modified, and short press/long press the increase/decrease button to modify;
(Note:Short press the setting button is invalid in P0~P3/P8/P9 mode);
e) In the OP/CL parameter modification interface, short press the pausing button to switch the timing unit (1s/0.1s/0.01s/1min)
f) After setting all parameters, long press the setting button to save the parameter setting and exit the setting interface;
Additional functions
a)Automatic sleep function:In the running interface (P0~P7 mode), long press the pausing button to start or close the automatic sleep function (LP selects on to start the sleep function, about five minutes, without any operation, the LCD backlight automatically turns off , The system is running normally, any key is pressed to wake up; off is to close the sleep function);
b) Parameter view:In the running interface, short press the SET button to display the current parameter settings of the system, which does not affect the normal operation of the system;
c) Display content switching:In P4 ~ P7 mode, short press the DOWN key to switch the display content (operating time/cycle times);
Package included
1 x Relay Module Switch
Weight | 0.03 kg |
---|
Customers Also Viewed
5pcs RobotDyn TP4056 Li-Ion Battery Charger Module with Protection Constant Current Constant Voltage
$17.37Power Supply ModuleAdd to cartDimensional drawing:Click here to openFeatureThe USB Li-Ion Battery Charger is a complete constant-current/constant-voltage linear charger for single-cell lithium-ion/Lithium Polymer (LiIon/LiPo) batteries. The Charger base on TP4056. The ideally suited for portable applications.And the Li-Ion Battery Charger can work within USB and 5V wall adapter. Other features include current monitor, under-voltage lockout, automatic recharge, and two …
MTOLASER 100mW 405nm Blue-violet Dot Laser Module Generator Variable Focus industrial Marking Position Alignment Diode Generator
$71.59Laser ModuleAdd to cartDescriptionThis variable focus 100mW 405nm Blue-violet dot laser module employs qualified 405nm red laser diode, generates the stable and reliable blue-violet laser dot applicable for various industrial alignments and positioning work. Compact size, easy to install, multi-angle adjustment of installation, easy to operate.SpecificationBrand:MTOLASERLaser Power:100mWWavelength:405nmBeam Shape:Dot Variable Focus:YESOutput Light:Visible LightWorking Voltage:DC 5VWorking Current:30-210mAOptics:Focus Lens Shell Material:Aviation …
DIY WiFi(APP Version) bluetooth Colorful Canton Tower LED Lighting Cube Music Spectrum Electronic Kit
$52.47DIY Electronic KitsAdd to cartDescription1. Offline animation increased to 20 species, 4 +1 spectrum modes, each animation has been carefully designed and debugged,the effect is very brilliant.2. The WiFi module and bluetooth module after careful PCB design and debugging, straight line transmission distance up to 10-20 meters.3. Phone bluetooth connection, available phone with the sound playback music. After using …
10pcs CJMCU-4599 Si4599 N and P Channel 40V (D -S) MOSFET Expansion Board Module
$24.37Expansion Board & ShieldAdd to cartFeaturesHalogen-freeTrenchFET power MOSFET100% UIS TestedApplicationsBackling inverter for LCD displayFull bridge converterPackage Included10 x CJMCU Expansion Board ModuleSize:8cm x 8cm x 5cm (3.15in x 3.15in x 1.97in)
Waveshare True color RGB LED HAT Colorful display Supports any revision for Raspberry Pi
$36.73Raspberry Pi & Orange PiAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.FeaturesSupports any revision of Raspberry Pi (directly-pluggable)Onboard 4 ≠ 8 RGB LED (WS2812B)Control pin is configurable via jumpers (0┯ resistor)Break out control pins, easy for working with other MCUComes with development resources …
Waveshare True color RGB LED HAT Colorful display Supports any revision for Raspberry PiRead More
IR908-7C PT908-7C SideTransmitter and Receiver Paired Tube 1.5mm Transparent 940nm
$2.82Electronic Accessories & SuppliesAdd to cartFeaturesHigh sensitivitySmall junction capacitancePb freeDescriptionsPT908-7C is a phototransistor in miniature package which is molded in a water clear plastic with spherical top view lens.The device is spectrally matched to infrared emitting diode.ApplicationsOptoelectronic switchVCR ,Video CameraFloppy disk driveInfrared applied systemSpecificationModel:IR908-7C.PT908-7COutput form:NPN transistor typeChannel:single channelOutput wavelength:940 nmPackage included1 x IR908-7C phototransistor1 x PT908-7C phototransistor
20pcs ME2-CO-14×14 Carbon Monoxide Gas Sensor CO Sensor 0~1000 ppm for Civilian Area to Detect CO Concentration Carbon Monoxide Detector CO Alarms
$67.68Sensor & Detector ModuleAdd to cart>>>Manual:Click here to openPrinciple IntroductionWinsen Electronics, produces Carbon monoxide sensor CO gas sensor, with low cost and fuel cell working principle.ME2-CO-14×14, fuel cell type sensor, detects gas concentration by measuring current based on the electrochemical principle, which utilizes the electrochemical oxidation process of target gas on the working electrode inside the electrolytic cell, the current …
6inch/150mm Aluminum 12V DC Max Load 1000N Linear Actuator Electric Putter Motor
$111.36Switch AccessoriesAdd to cartFeatures* Wear-resistant, smooth appearance, high compressive strength.* Maximum thrust 6000N.* Easy to use.SpecificationMaterial:Aluminum + PlasticColor:SilverSize:28 x 8cmInput:12V DCStroke:6 inch/ 150mmMax load:1000NSpeed:12 /sPackage included1 x Electric putter2 x Bracket
Reviews
There are no reviews yet.