XY-DJ01 DC6-30V 30A 1CH Digital Display Relay Module Delayed Power off Trigger Delay Cycle Timing Circuit Switch Rail Type
$26.88
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. With LCD display, the current mode and parameters are clear at a glance, very clear, simple and practical;
2. Support button trigger control, high and low level trigger, switch value control, support NPN, PNP sensor access, suitable for most occasions;
3. Wide voltage supply (6~30V),Rail installation, very convenient to use;
4. There is a key pausing function, with reverse connection protection, reverse connection does not burn;
5. Added sleep mode. After enabling, without any operation for about 5 minutes, the LCD backlight will be automatically turned off; any key to wake up;
6. Different OP, CL, LOP parameters can be set, these parameters are independent of each other and saved separately;
7. All set parameters are automatically saved after power-off.
Operating mode
P0:After the signal is triggered, the relay is turned on for OP time, and then off; within the OP time, the signal is triggered again invalid
P1:After the signal is triggered, the relay is turned on for OP time and then off; within the OP time, the signal is triggered again to re-timing
P2:After the signal is triggered, the relay is turned on for OP time and then turned off; within the OP time, the signal triggers reset again, the relay is turned off, and the timing stops
P3:After the signal is triggered, the relay is turned off for CL time, and then the relay is turned on;
P4:After the trigger signal is given, the relay is turned on for OP time, the relay is disconnected for CL time, and then the above actions are cycled, the signal is given again in the cycle, the initial state is restored, and the timing is stopped; the number of cycles (LOP) can be set; the cycle ends, keep the relay off ;
P5:Give the trigger signal, after the relay is disconnected from the CL time, the relay will be turned on for OP time, and then cycle the above actions, give the signal again in the cycle, restore the initial state, and stop timing; the number of cycles (LOP) can be set; the cycle ends, keep the relay on ;
P6:After power-on, no trigger signal is needed, the relay is on for OP time, the relay is off for CL time, and the above actions are cycled; the number of cycles (LOP) can be set; the cycle is over, keep the relay off;
P7:There is no need to trigger signal after power-on, the relay is off CL time, the relay is on OP time, and the above actions are cycled; the number of cycles (LOP) can be set; the cycle ends and the relay is kept on;
P8:Signal hold function If there is a trigger signal, the timer is cleared and the relay remains on; when the signal disappears, the relay is disconnected after timing OP; during the timing, there is a signal again, and the timer is clear;
P9:Signal hold function If there is a trigger signal, the timer is cleared and the relay remains off; when the signal disappears, the relay is turned on after timing CL; during the timing, there is another signal, and the timer is cleared;
(P0~P7) mode, short press the pausing button, when the system does not trigger the timing, the system starts timing; when the system is already timing, the system pauses timing, the relay is disconnected, and flashes ‘OUT’ as a reminder;
In P8 P9 mode, the pausing button on the running interface is used as the trigger signal, and its button function is disabled by short press/long press;
Product parameter
Working voltage:6-30V power supply
Trigger signal source:high level trigger (3.0V~24V), low level trigger (0.0V~0.2V), switch control (passive switch).
Output capacity:can control equipment within DC 30v 30A or AC 220v 30A
Quiescent current:15mA
Working current:50-130mA
Service life:more than 100,000 times;
Working temperature:-40-85→;
With optocoupler isolation, enhanced anti-interference ability, industrial-grade circuit board, set parameters are always remembered after power failure.
Timing range
0.01 second (minimum) ~ 9999 minutes (maximum) continuously adjustable
How to choose the timing range
In the OP/CL parameter modification interface, short press the pausing button to select the timing range;
XXXX No decimal point, timing range 1 second~9999 seconds
XXX.X The decimal point is in the tenth place, and the timing range is 0.1 seconds to 999.9 seconds
XX.XX The decimal point is in hundreds, and the timing range 0.01 seconds to 99.99 seconds
X.X.X.X All decimal points are lit, timing range 1 minute to 9999 minutes
For example, if you want to set the OP to 3.2 seconds, move the decimal point to the tens place, and the LCD will display 003.2
Parameter description:OP on time, CL off time, LOP cycle times (1-9999 times, ‘—-‘ represents infinite cycles)
parameter settings
a) Enter the setting interface by long pressing the setting button;
b) First set the work mode, the work mode flashes to remind, short press the increase/decrease button to set the work mode;
c) Short press the setting button, select the working mode, and enter the system parameter setting;
d) In the system parameter setting interface, short press the setting button to switch the system parameter to be modified, and short press/long press the increase/decrease button to modify;
(Note:Short press the setting button is invalid in P0~P3/P8/P9 mode);
e) In the OP/CL parameter modification interface, short press the pausing button to switch the timing unit (1s/0.1s/0.01s/1min)
f) After setting all parameters, long press the setting button to save the parameter setting and exit the setting interface;
Additional functions
a)Automatic sleep function:In the running interface (P0~P7 mode), long press the pausing button to start or close the automatic sleep function (LP selects on to start the sleep function, about five minutes, without any operation, the LCD backlight automatically turns off , The system is running normally, any key is pressed to wake up; off is to close the sleep function);
b) Parameter view:In the running interface, short press the SET button to display the current parameter settings of the system, which does not affect the normal operation of the system;
c) Display content switching:In P4 ~ P7 mode, short press the DOWN key to switch the display content (operating time/cycle times);
Package included
1 x Relay Module Switch
Weight | 0.03 kg |
---|
Customers Also Viewed
JT-180 1.4W 7V Solar Panel Power Fountain Pump Outdoor Garden Pond Pool Submersible Water Pump Kit
$64.79Electrical Pump & ValveAdd to cartSpecificationsModel:JT-180Materail:Monocrystalline silicon+ABSSolar battery:7V,1.4WSolar battery:110mm*110mm/4.3inch*4.3inchThe power of pump:DC7V 1.4WMax flow pump:200L/hMax.water height of pump:75cm(Max,water-jet height:50cm)Life time:≥15000HoursFeatureThis product has the lowest rate of the power of solar battery to pump power,and it is not only very easy to operate the brushless motor under little sunshinelike the brush motor,but also, it has the much long life time than …
5pcs 220V XH-W3003 Micro Digital thermostat High Precision Temperature Control Switch Temperature Alarm
$68.61Sensor & Detector ModuleAdd to cartFeatureProduct Name:Microcomputer Temperature ControllerProduct model:XH-W3003Temperature range:-50~110°CTemperature control range:-50~110°CTemperature measurement accuracy:+-0.1 °CTemperature control accuracy:+-0.1 °CTemperature probe:1 meter waterproof probeSupply voltage:AC110-220VOutput power:AC220V:1000WOutput type:Direct outputOutput currentAppearance size:60 x 45 x 31mmOpening size:73mm (aperture 4mm)Features:Setting methodHigh temperature alarm (range:-50~110°C):For example, if you want to alarm when the temperature exceeds 20 °C, set the upper limit temperature to 20 °C …
30pcs 2.4G Wireless Remote Control Module Transmitter and Receiver Module Kit Transmission Reception Communication 6 Channel Output
$178.88Smart ModuleAdd to cartTY24D-TX is the transmitting module, TY24D-RX is the receiving module. The transmitting module only needs to provide 3.3V power supply and transmitting button and one LED as the transmitting status indication. The output port corresponding to the receiving module can output the level signal, and the module has the output status. Select to select the …
2Pcs DC-DC Boost Buck Adjustable Step Up Step Down Automatic Converter XL6009 Module Suitable for Solar Panel
$8.87Boost & Buck ModuleAdd to cartDescriptionsAuto start voltage will be pulled down to 7V or less, and engine will at high speed when the voltage up to 15V or higher. It is hard to work for 12V electrical equipment, this automatic buck boost module can solve this problem, regardless of the input voltage is 5V or 12V or 32V, the …
5 Pcs Blue Acrylic Wall Mounted Protective Case Support Cooling Fan for Raspberry Pi 4 Model B
$56.17Raspberry Pi & Orange PiAdd to cartDescription– Wall Mounting Available– Red Blue Black Optional– Support Adding Cooling Fan– Compatible With Raspberry Pi 4B– Make of Transparent Acrylic, could check the board status easilyThere is a Protective Film on the board surface, please take it off before using.Package Included5* Blue Acrylic Case Kit
5pcs 0.5A 3S Synchronous Buck Li-Ion Charger DC 5-23V to 4.2V 8.4V 12.6V Power Supply Module for 3.7V 7.4V 11.1V 18650 Lithium Battery
$32.85Power Supply ModuleAdd to cartDescription3-Cell(3S) 12.6V VersionInput voltage:DC 14.8-23V(Recommend DC 14.8V/15V/18V)Charging voltage:12.6VCharging current:0.5ALed indicatorBright:Charging Off:full blinking:almost full; If the charging current is too large (or the battery capacity is small), it will quickly enter the flashing state, and the charging current should be reduced.Operating ambient temperature:-40° to +85°Storage temperature:-65° to +125°Size:30*15*5.5mmWeight:2gApplicationsCellular TelephonesPDA, MP3 Players, MP4 PlayersDigital CamerasBluetooth ApplicationsGame PlayersNotebookli-on …
15W 18V Semi Flexible Solar Panel with 5V USB Port & Cables
$58.36Smart Robot & Solar PanelAdd to cartSpecificationsMaximum Power (Pmax):15wMaximum Power Voltage (Vmp):18VMaximum Power Current (Imp):1.2aThe Number of Cells:36 PCSOutput:USB 5V & DC 18VSize:435 * 200 * 2.5 mmFeaturesLightweight and easy to carry.The charging temperature is -20-70 degrees Celsius.Flexible solar panel, maximum bending 30 degrees arc.Short circuit and surge technology keeps you and your equipment safe.Durable, waterproof.Packing Included1 x solar panels1 x …
15W 18V Semi Flexible Solar Panel with 5V USB Port & CablesRead More
DPX6005S Digital CNC Adjustable DC Power Supply 0-60V/32V 5A/3A 48V24V12V Step-down Board with LCD Display
$82.94Power Supply ModuleAdd to cartFeaturesIt is a fully CNC programmable step-down power supply with small size, high power, high efficiency and stable operation. It adopts a 1.8-inch TFT color liquid crystal display to provide comprehensive and clear display data. The power supply is controlled by an advanced microprocessor and can be precisely adjusted. And display voltage and current; using …
Reviews
There are no reviews yet.