10V 12V 24V 36V PWM DC Controller with Positive inversion Switch PWM DC Controller for DC Motor Speed Controller 150W
$8.73
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
1. Connect the motor, the motor wire can be positive or negative.
2. Adjust the switch, the forward and reverse switch is used to control the direction of the motor speed. When the switch is at the zero position, the motor stops.
3. Potentiometer knob. Adjusting the potentiometer knob can change the output duty ratio of the governor and the motor speed.
Specifications
1. Input voltage requirement:10V-40VDC (wide range)
2. Output power:150W
3. Continuous current:5A, overload short circuit protection current 8A, short circuit time no more than 30 seconds
4. PWM pulse width modulation range:0%-100%
5. Size:length 74mm*width 46mm height about 27mm
according to the center distance of the mounting hole 63.5mm*36.5mm
positioning hole diameter 3.5mm
6. Weight:60 grams.
Introduction to PWM
The full name of pulse width modulation is:Pulse WidthModulator, or PWM for short. Because of its special performance, it is often used as a lamp dimming in a DC loop or a DC motor speed regulating. This circuit is a motor controller made using the principle of pulse width modulation (PWM). Using this method to control the motor speed has two advantages
1. It is mainly by changing the duty cycle of the output square wave to change the average on-time on the load from 0-100% to achieve the purpose of adjusting the brightness/speed of the load. The advantage of using pulse width modulation (PWM) to achieve dimming/speed regulation is that the energy of the power supply can be fully utilized and the efficiency of the circuit is high. For example:when the output is a 50% square wave, the power source energy consumed by the pulse width modulation (PWM) circuit is also 50%, that is, almost all energy is converted into load power output. When the common resistor step-down speed regulation is used, to make the load obtain 50% of the maximum output power of the power supply, the power supply must provide more than 71% of the output power, of which 21% is consumed by the voltage drop and heat consumption of the resistor.
2. The pulse width modulation (PWM) method can make the load get the full power supply voltage when it is working, which is beneficial to overcome the internal coil resistance of the motor and make the motor generate greater torque.
Wiring
1. Connect the power cord, ensure that the positive and negative switches are in the middle zero position, connect the DC power supply, ensure that the DC power supply voltage range is greater than 10V and less than 40V, and ensure that the output power of the power supply meets the needs of the motor. Do not connect the positive and negative terminals of the DC power supply in reverse, otherwise The governor may be damaged.
Package Inlcuded
1 x 10V 12V 24V 36V PWM DC Controller
Weight | 0.065 kg |
---|
Customers Also Viewed
Ebyte E810-DTU(CAN-ETH) Smart Protocol Conversion GPRS Modem Modbus to TCP/IP CAN Bus Ethernet interface Modbus RTU Gateway
$96.54Smart ModuleAdd to cartSpecificationItemsDescriptionInterfaceEthernet:RJ45, 10/100MbpsCAN:1*5*3.81, ScrewingNetwork protocolIP,TCP/UDP, ARP, ICMP, IPV4Simple transparent transmissionTCP Server,TCP Client,UDP Server,UDP Client,Cloud transparent transmissionData Packing MechanismByte packing and time packingTCP Server connectionSupporting up to 6 TCP connectionsIP accessStatic IP,DHCPDNSSupportCAN Transmit baud rateA total of 15 baud rates from 6Kbps-1000KbpsCAN filtering modeUp to 8 filtration modesCAN data layoutProtocol formatParameter configurationWeb page configurationWorking current82mA@12VVoltage8V~28VDC,Over 28V may …
TP4056 Micro USB 5V 1A Lithium Battery Charging Protection Board TE585 Lipo Charger Module
$4.36Battery Protection ModuleAdd to cartSpecificationProduct name:Lithium Battery Charging BoardInput voltage:5VMaximum charging current:1000 mACharge cut-off voltage:4.2 V + / – 1%Battery overcharge protection voltage:2.5 VBattery over-current protection current:3 AInput interface:micro USBSize:27mm x 17mmHow to Use1. Input port with micro 5pin USB female, can directly use mobile charger for input to the lithium battery,and still retain the input voltage wiring solder …
TP4056 Micro USB 5V 1A Lithium Battery Charging Protection Board TE585 Lipo Charger ModuleRead More
10pcs 10-50W 15Wx2 Audio Power Amplifier DC 6 -18V TDA7297 Module Double Channel
$77.83Amplifier BoardAdd to cartFeatures– Working Voltage:6-18V DC– The onboard TDA7297 audio power amplifier chip, double channel 15WX15W– Speaker for European 4-8 10-50W use– Main pin has led chip, convenient external control device, the onboard– 5.08 (mm) distance between two p terminal 2 road, around a track connection output respectively– The onboard dial potentiometer, output size can adjust the …
10pcs 10-50W 15Wx2 Audio Power Amplifier DC 6 -18V TDA7297 Module Double ChannelRead More
LILYGO TTGO ESP32-Micro32 ESP-32-PICO WIFI Wireless bluetooth Control Module
$20.57Smart ModuleAdd to cartFeatureSeries:ESP32Model:ESP32-+MicroType:Regulator ICPower:1WApplication areas:household appliances, smart home, wearable devices, Internet of Things IoTDescriptionsESP32 vcc range:2.2V-3 6VVBAT:direct to battery (and charger)VUSB:direct to USB(5V)VCC:Output of regulator 3.3V/600mAUp to 250mA during RF transmissionsWirelessWifi:802.11 b/g/n/e/iWPA/WPA2/WPA2-Enterprise/SPSbluetooth:bluetooth 42BLESize:1.9×1.3cm/0.75×0.51inchNotePlease allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.Due to the difference between different monitors, the …
LILYGO TTGO ESP32-Micro32 ESP-32-PICO WIFI Wireless bluetooth Control ModuleRead More
50Pcs 915MHz SW915-TH12 Copper Spring Antenna for Wireless Communication Module
$28.90Module ComponentsAdd to cartFeaturesSW915-TH12 copper spring antenna is a special antenna for 915MHz wireless communication system design. The antenna has good standing wave ratio, compact shape, ingenious structure, convenient installation, stable performance and good anti-vibration and aging ability.SpecificationFrequency range:915 MHz (+/-5)Standing wave ratioInput impedance:50Maximum power:5WGain:2.15 dBiWeight:1gHeight:12.5+/-1 mm (9T)Antenna color:copperInterface Form:Direct WeldingPackage included50 x Antenna
5Pcs 360 Degree Rotary Encoder Module Encoding Module
$11.83Other Module BoardAdd to cartFunctional characteristics and technical parameters 1)Nominal voltage:DC 5V 2)Wire A, B:0.5mA (Max 5mA; Min 0.5mA) 3)Common wire:1mA (Max 10mA; Min 0.5mA) 4)Temperature range:-30→ to+80→ 5)Output signal A , B phase position output square wave, when clockwise rotation, A phase position pull ahead B phase position 90 °, when anti-clockwise, B phase position pull ahead A …
5Pcs 360 Degree Rotary Encoder Module Encoding ModuleRead More
RD21F Delay Relay Module Power for Delay off Fan Module AC 100V-220V Time 0.2S-300min Adjustable Delay
$13.11Relay ModuleAdd to cartSpecificationsVoltage:100V-220V ACPower consumptionOutput:The output voltage is the same as the input voltage, and the maximum power supply capacity is 10A.Size:88* 36 * 22mmScrew hole:center distance 83mm * 31mm, aperture 3.2mmTime range:(4 files, selected by switch)First gear:range 0.2 seconds-30 seconds, accuracy:0.1 secondsSecond gear:range 0.2 seconds – 300 seconds (5 minutes), accuracy:0.3 secondsThird gear:range 0.2 seconds-30 minutes, …
Reviews
There are no reviews yet.