YX-815 Battery Charging Controller Battery Protection Module for Undervoltage Control Over-discharge Protection Board 6V-48V
$19.67
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
– When the battery voltage is insufficient, disconnect the load and connect the charger. When the battery voltage is too high, disconnect the charger and connect the load.
– The battery charge controller has adjustable parameters and power-off memory function.
– Control voltage is 5V-60V, accuracy is up to 0.1V.
– The battery charge controller is suitable for batteries, lithium batteries, etc.
– The charge controller protects the battery from undervoltage, protects the battery from overcharging, and protects the load control.
Specifications
Model:YX815
Control voltage:5V-60V
Control current:20A
Control accuracy:0.1V
Voltage error:±0.1V
Scope:battery, lithium battery, etc.
Packing:anti-static bag
Size:7.9 x 4.3 x 2.8cm
Installation size:76 x 39.5mm
Voltage Setting Method
*In the setting state (digital tube flashing)
S1:Up-regulation voltage
S2:Down voltage
*S1 undervoltage setting button (charge start, load stop)
1. Under the normal display voltage, press the S1 button to display the charge start (load stop) voltage value.
2. Press and hold the s1 button to flash the digital tube. Set the charging start voltage (load stop) value with the s1 and s2 keys.
*S2 overvoltage setting button (charge stop, load start)
1. Under the normal display voltage, press the S2 button to display the charge stop (load start) voltage value.
2. Press and hold the s2 button to flash the digital tube. Set the charge stop (load start) voltage value through the s1 and s2 keys.
*Reset
In the power state, press the buttons of s1 and s2 at the same time, the digital tube displays 888, that is, the original factory setting is restored successfully.
(Note:When s1 cannot increase the voltage, first set s2, s2 can’t lower the voltage, first set s1)
Package Included
1 x YX-815 Battery Charging Controller Battery Protection Module
Weight | 0.041 kg |
---|
Customers Also Viewed
29Pcs/Set 24/29 Laboratory Glassware Kit 25/50/100/250/500mL Flask Lab Chemistry Glass Ground Joint Distillation Separation
$261.21Lab ChemicalsAdd to cartDescription1. Be made of G3.3 borosilicate glass.This borosilicate glass with low linear coefficient of expansion is ideal choice for fabricating laboratory glassware.Annealing Point:560℃Linear Coefficient of Expansion:32*10-7/℃Softening Point:820℃2. The thickness of the flask wall is 2.5mm.3. All of the joint is 24/29,This kit has 18 kinds of parts as belowNo.:Specification:Part name:Quantity1:24/29:Claisen adapter:12:24/29:75°Distillation adapter:13:24/29:Vacuum take-off adapter:14:24/29:Inlet/Thermometer adapter:15:24/29 …
Mini DC Vibration Motor Module 8800 RPM High Frequency Vibration Single-direction Rotation
$10.11Other Module BoardAdd to cartDescription Vibrator Motor is consist of an N20 Motor and a metal eccentric wheel. This N20 motor is has a 5V supply voltage. The output shaft has a rotational speed of 8800 RPM. Specifications can be seen below. With this product, you can implement a vibration function to your application. These days miniature vibrating motors …
Mini DC Vibration Motor Module 8800 RPM High Frequency Vibration Single-direction RotationRead More
D1 R2 V2.1.0 WiFi Uno Module Based ESP8266 Module Geekcreit for Arduino – products that work with official Arduino boards
$13.11Motherboard & Development BoardAdd to cartGithub:Click here to openMore information:Click here to openDescriptionBased on the ESP-8266EX.Compatible, you can use it on IDE.NodeMcu Compatible11 Digital I/O pins1 Analog Input pinOTA — Wireless Upload(Program)On board switching power supply — Max 24V input, 5V 1A outputWhat’s new about V2.1.0Use BRT (Bias Resistor Transistor), easier into flash mode.Optimize the circuit, the system is more …
1.54 inch Electronic Flexible ink Screen Display Module Black and White Dual Color e-Parper OLED
$39.35Display ScreenAdd to cartFeatureWorking voltage:DC 5VWorking current:150mAMaximum power:0.75WDisplay color:black and whiteDisplay size:1.54 inch/2.13 inchDisplay resolution:200*200/250*122Interface type:8pin header with 2.54mm pitchOperating temperature range:-20C to +60CPositioning hole size:diameter 3mmHeight:7mmPackage includes1 x Display board
AD/DA Extension Board PCF8591 GPIO 3.3V 5V for Raspberry Pi 4B/3B+/3B
$34.43Raspberry Pi & Orange PiAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.SpecificationsSize:65*56*24mm Weight:27gPins:Raspberry Pi GPIOOutput Voltage:3.3V/5V (IO VCC:3.3V)Analog Port-Input:4 Analog inputs are converted to Digital AD input-Output:Digital input simulated to Analog DA outputDigital Port:27 Digital IOI2C:3 Way I2C(BCM2,3)Serial Port:1 Way Serial Port(BCM14,15)SPI:1 Way …
AD/DA Extension Board PCF8591 GPIO 3.3V 5V for Raspberry Pi 4B/3B+/3BRead More
Wooden Christmas Advent Calendar Christmas Elk Decoration Fits 25 Circular Chocolates Candy Stand Rack
$21.57ChemistryAdd to cartSpecificationName:Wooden Christmas CalendarSize:Approximately 40x35cm (15.7X13.8in)Material:WoodenFeatureIt is sent flat packed, simply slot the stand together and place the tree into the stand and fill with your chocolates.Package Included1 x Christmas Calendar (The Chocolate is NOT included)
3PCS USB Microphone for Raspberry Pi
$27.14Raspberry Pi & Orange PiAdd to cartFeature1. Sensitivity:-47dB ÷ 4dB2. Sensitivity reduce:-3dB at 1.5V3. Working Voltage:4.5V4. Frequency response:100 ~ 16kHz5. SNR:More than -67dB6. Cable length:0.7-0.9MThe effective distance of 2 meters or morePackage included3xUSB Microphone For Raspberry Pi
Reviews
There are no reviews yet.