YYD-4 Double MOS Timer Relay Module 2 Channel Cycle Delay Timing Relay for Control Solenoid Valve Water Pump Switch
$22.03
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
– To achieve high frequency, fast and frequent switching of the circuit. – The on-off process will not produce noise.
– No sparks.
– There will be no electromagnetic interference.
– Often used to control motors, light bulbs, LED strips, DC motors, micro pumps, solenoid valves, etc.
– The function mode can be set freely by the customer, and the power-off automatically memorizes the function and time set last time.
– Delay time range:0.1 seconds for 9 seconds, 1 second to 999 seconds, 1 minute to 999 minutes, the customer can adjust.
– After the parameter is cut off, it can be memorized forever. The input and output are isolated by optocoupler to enhance the anti-interference ability.
Specifications
Output capacity:DC 5A
Working voltage:DC DC 7~30V (common general working voltage 9v 12V 24V)
Quiescent current:20mA Operating current:60mA
Size:80mm*51mm*15mm
Signal terminal:high level trigger, can be connected to PNP sensor, proximity switch, button, button switch, etc.
Functions
Function 1:P——1
Give signal 1, OUT1 output, and stop automatically after delay time .
Signal 2, OUT2 output, after the delay time , automatically stop.
During the delay period, the trigger again can be freely set
A:The trigger is invalid again;
B:Trigger re-timed again;
C:The reset timing is triggered again and the motor stops immediately.
If the delay time is set to 0;
Give signal 1, OUT1 output, keep output;
Give signal 2, OUT2 output, keep output;
Function 2:P——2
No signal terminal is required, and the energized motor automatically works in turn;
Specific working mode:stop Y (seconds, minutes) – OUT1 work X (seconds, minutes) – stop Y (seconds, minutes) – OUT2 work …. cycle work. ……. Cycle work.
If the stop delay time is set to 0;
Specific working mode OUT1 work X (seconds, minutes) — OUT2 work X (seconds, minutes) — OUT1 work X (seconds, minutes) — OUT2 work X (seconds, minutes) ……….. Cycle work.
Package Included
1 x YYD-4 2 Channel Cycle Delay Timing Relay
Weight | 0.039 kg |
---|
Customers Also Viewed
50Pcs 12V Female DC Power Socket Jack Plug Wire Connector Cable CCTV DC 5.5 x 2.1mm
$32.76Module ComponentsAdd to cartFeaturesDC 5.5 x 2.1mm.Wire Specification:0.15mm²Length:Approx. 27cmMax Current Rating:2AMax Power Rating:60WTransmission voltage:1V~38VUsage temperature:-50→~65→Material:Copper WireUse for:Led Driver/ Strip connector/ CCTV Camera.Package Included50 x 12V DC Connector Cables
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002
$87.30RF amplifierAdd to cartParameter1. Power supply voltage:11V-15V DC2. Gain:greater than 20DB in the 30MHz-1GHz frequency band3. Input and output impedance:50┯4. Maximum output power:10dBm5. Input signal:-10DBm6. Bandwidth:30MHz to 3GHz (gain is different under different frequencies)Measured gain (prototype)F=5.0MHZ GAIN=13.15DBF=10.0MHZ GAIN=23.89DBF=30.0MHZ GAIN=27.06DBF=50.0MHZ GAIN=27.92DBF=500.0MHZ GAIN=24.84DBF=1.0GHZ GAIN=22.01DBF=1.5GHZ GAIN=20.72DBF=2.5GHZ GAIN=17.65DBF=3.5GHZ GAIN=10.06DBF=4.0GHZ GAIN=9.09DBF=5.0GHZ GAIN=8.90DB7. Noise figure NF (theoretical value)500MHz@ 0.6dB1GHz@ 0.7dB2GHz@ 0.7dB3GHz@ 1.1dB4GHz@ 1.6dB5GHz@ 2.1dBComparison …
EMC EMI Low Noise Pre-RF Amplifier 20dB 5MHz-5GHz RFamp002Read More
RX24 100W 30R 30RJ Metal Aluminum Case High Power Resistor Golden Metal Shell Case Heatsink Resistance Resistor
$6.55Electronic Accessories & SuppliesAdd to cartFeaturesIt has the characteristics of small size, high power and high precision.It is sealed by professional technology.It has the advantages of stronger heat resistance, higher temperature resistance, moisture resistance, high anti-vibration and explosion protection.Scope of application:Testing power supply, frequency converter, automobile LED lamp, automation equipment, audio, frequency divider, servo industry and other harsh industrial control …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter Module
$16.71Smart ModuleAdd to cartItem OverviewThe SRX882 is a super-heterodyne receiver module with a micropower and strong driving force in conjunction with the ASK transmitter module. It has high stability, anti-interference and high cost performance, and also has a strong driving force, which can pass ROHS, FCC, CE and other certifications. The data port can be directly connected to …
5pcs SRX882 433/315MHz Superheterodyne Receiver Module Board for ASK Transmitter ModuleRead More
13.5mm Adjustable Laser Pointer Module Holder Mount Clamp 3 Axis
$42.51Engraving Parts & AccessoriesAdd to cartDescriptionMaterial:stainless steelColor:blackMount Inner Diameter:13.5mmSize:40X60mm/1.57X2.36inch(L*H)Feature1. Stainless steel laser moudle holder2. Professional angle and height adjustable design3. Installed on the laser module,it can become a professional laser pointer or laser locator4. Can also used a as a heatsink for the laser module,extend the laser module life time5. Fit for 12mm diameter laser modulePackage included1X Laser Module Holder
Mask Scary Glow Mask LED Mask for Halloween Mask Party Masks Neon Maske Skeleto Halloween Party Decor
$17.17EL ProductsAdd to cartColor. Red / Color. Orange / Color. Yellow / Color. Blue / Color. Blue / Color. Purple / Color. White / Color. Pink / Color. Fluorescent Green / Color. Green / Color. Transparent Blue /
Reviews
There are no reviews yet.