LM3914 Battery Capacity indicator Module LED Power Level Tester Display Board
$8.73
Color. Red / Color. Blue / Color. Green /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Features
– This is a DIY kits,need buyer to assemble it.
– Power display is to take some voltage, perform simulations show the percentage of segments, such as 3.7V lithium battery, take the lower voltage 3V, the upper limit of 4.2V, 4.2-3 = 1.2V, the voltage difference between the lower limit of 1.2V, is the battery Analog power up
– LM3914 can accurately detect an analog voltage, and 10 LED display, display dot mode LED is lit 10 one, or in a stripe pattern individually lit LED
– Display Description:Displays the battery voltage between the lower limit of 10 files showed that representatives of each of the lights 10% charge displays, on behalf of 10 lights display charge 0% -100% range; you can also change the single light display, is displayed only a light, more power, single-light power 4mA, all bright 42mA.
– Suitable for lithium batteries, lead-acid batteries and other power batteries need to be displayed
– Power adjustable display range for the battery discharge curve of a scientific setting, direct support:single lithium 1S (4.2V) ~ 4S (16.8V), lead acid 6V ~ 12V, NiMH 3.6V ~ 18V, nickel-cadmium batteries 3.6V ~ 18V
Parameter
Power:bar display full brightness 42ma, single light shows 4ma
Measuring range:the battery inside the common 2.4-20v
Color:red, green, blue,
Display:Multi-light bar display or a single light dot display
pcb board size:45 x 14 mm
Display Mode A / P:full brightness linear / single lamp lattice mode switch, the default is a linear model, the board set aside a switch pad, even with soldering pads can be turned into full light linear mode, no welding is the point like single light display
A variety of high and low voltage battery display range adjustment
1. Lithium battery
After the completion of a single lithium battery discharge voltage is 3V, when fully charged 4.2V;
1S correspond to 3V (first light) to 4.2V (tenth lights);
2S corresponds to 6V (first light) to 8.4V (tenth lights);
3S correspond to 9V (first light) to 12.6V (tenth lights);
4S correspond to 12V (first light) to 16.8V (tenth lights);
Other series voltage and so on.
2. Lead Acid Batteries
6V or 12V lead-acid battery is generally
6V corresponds to 4.8V (first red light) to 6.75V (tenth lights);
12V corresponds to 9.6V (first red light) to 13.5V (tenth lights);
The module according to the above standard battery discharge range design, can accurately reflect the battery, so that users can readily observe the status of the battery.
Adjustment methods
Equipment needed:an adjustable power supply, precision accuracy of the decisions of the panel display. Watches word screwdriver.
Case in single 3.7V lithium, 3V is less low-end power, 4.2V for the full power of high-end.
1. the adjustable power supply voltage to the desired voltage display high 4.2v, connect this board, this time there are two results:one is not bright, one is all bright or light a few. This time slow adjustment plate 503 (50k) potentiometer until the LED strip just lit up the whole. Several light does not shine or counterclockwise to adjust, when full light clockwise.
2. the adjustable power supply voltage to the low end of the desired 3V. Adjustment board 502 (5K) potentiometer to just light a LED, does not light clockwise adjustment, several or all bright light counterclockwise.
3. patiently repeating the first step two. Usually 2 times to adjust to the desired display range.
Note
To adjust their voltage, according to the method of adjusting the order, to emphasize high-end, then adjust the low end.Red then positive, then negative black, must not be reversed, this module is the maximum limit voltage DC 20V, please use anti-static welding or soldering station pull electric heat welding.
Package Included
1 x LM3914 Battery Capacity Tester Display Board
Weight | 0.05 kg |
---|
Customers Also Viewed
R103C 6GHz 5.8G Broadband Directional Antenna High Gain ads-b UAV Image Transmission Antenna
$30.90RF amplifierAdd to cartDescriptionThis directional antenna is suitable for directional radio signal transmission and reception signal source reconnaissance lateral, broadband signal testing, etc.The antenna covers the common frequencies of mobile phone communication, UWB positioning module and Wifi and other radio frequency unitsFrequency range:850MHz-6GHzDimensions:22*15CMPolarization method:linear polarizationRated gain:7dbiReturn loss:10DBPower:5WWeight:110gPackage included1 x Broadband Directional Antenna
3Pcs HY-SRF05 Ultrasonic Distance Sensor Module Measuring Sensor Module
$13.93Sensor & Detector ModuleAdd to cart3Pcs HY-SRF05 Ultrasonic Distance Sensor Module Measuring Sensor ModuleDescriptionThis module performance is stable, measure the distance accurately. Module precision, blind spots (2cm) super close.SpecificationInput voltage:5V DCQuiescent currentOutput level(high):5VOutput level(low):0VInduction angleDetection distance:2cm – 450cmAccuracy:up to 0.3cmBlind spots:2cmPackage included3 x HY-SRF05 ultrasonic distance sensor module
AC Contactor AC220V Coil 32A 3-Phase 1NO 50/60Hz Motor Starter Relay LC1 D1810
$48.59RelaysAdd to cartDescriptionAC Contactor AC220V Coil 32A 3-Phase 1NO 50/60Hz Motor Starter Relay LC1 D1810Features1.High strength PC flame retardancy,AC220V copper coil.2.A contactor (motor starter) is a high capacity relay that has built-in auxiliary contact to work with momentary push buttons.3.It is versatile and is often used to control a motor or as a main power switch, sometimes …
AC Contactor AC220V Coil 32A 3-Phase 1NO 50/60Hz Motor Starter Relay LC1 D1810Read More
BESTEP 1 Channel 5V Low Level Solid State Relay Module with Fuse 250V2A for Auduino
$6.55Relay ModuleAdd to cartDescription1. 5V solid state relay 240V 2A, output with resistance fuse 240V 2A.2. Size:25*34*25 (length * width * height) Net weight:13g3. Input power:5V DC (160MA)4. Input control signal voltage:(0-1.5V state low level relay ON) (2.5-5V state high level relay OFF)5. The blue KF301 terminal is more convenient to connect to the control line.Module interfaceInput sectionDC+:Connect …
BESTEP 1 Channel 5V Low Level Solid State Relay Module with Fuse 250V2A for AuduinoRead More
ZL-7903A Multifunctional Automatic Temperature and Humidity incubator Controller XM-18 100-240V AC with with ZL-SHr05J Sensor
$107.15Test & Measuring ModuleAdd to cart>>>Manual:Click here to openFeatureZL-7903A is an industrial intelligent temperature and humidity controller. Optional external SSR to realize bigger heatingpower rate, and with optional temperature PID control. With touch button and big size LCD display, convenient to operate,easy to set up. Applicable for control of incubator, climate chamber, warehouse, and so on.Main Function1. Ventilation fan control2. …
Reviews
There are no reviews yet.