Radio Frequency Broadband Low Noise Amplifier LNA (20-3000MHz gain: 35dB)
$39.35
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
The amplifier is an upgraded version of the 5-3500MHz amplifier. It adopts a cascade method to ensure that the amplifier has a lower noise figure while enhancing the gain of the amplifier. The typical gain is 35dB, the low frequency band has higher gain, and the high frequency band has a little drop. .
Applications
This amplifier is used for low-noise amplification of various radio frequency signals, which can increase the receiving effect. Connecting this product to the output of the receiving antenna can amplify the received weak signals, thereby expanding the receiving distance. Increase the communication effect! Widely used in shortwave, FM radio, walkie-talkie, GPS, Beidou receiver, wifi, Bluetooth, etc. where low noise and small signal RF amplification is required!
Product index
Working frequency:20-3000MHz
Amplification gain:Gain=35dB (typical)
Maximum output:+20dBm (100mW) @1dB compression point
Working current:150mA
Working voltage:3.3-6 (VDC)
System impedance:50 ohms
Product appearance size:length 42mm width 24mm height 3 mm
Weight:6.5g
Package includes
1 x Radio Frequency Broadband
Weight | 0.0065 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.