Soil Moisture Detection Module Water Detect Corrosion Resistance Probe Sensor DC3.3V-12V
$17.48
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Size:36 x 15 x 7mm
Voltage:3.3-12VDC
Current:working
Interface:+-DO AO
DO digital quantity / AO analog quantity
Uses:to detect soil moisture
Principle:The soil moisture probe detects the humidity, and the voltage comparator determines the humidity. When the humidity is greater than the set value, the DO outputs a low level.
Instructions for use
1. “+ Inch is connected to the positive pole of the power supply, and “- Inch is connected to the negative pole of the power supply. Do not reverse the connection, otherwise the chip may be burned out. After the power is connected, the “P Inch power indicator lights up and the module works normally.
2. The blue potentiometer can be adjusted clockwise/counterclockwise to increase/decrease the probe detection sensitivity. Take the “thermal sensor Inch as an example. Assume that the default is 25°C trigger and the “DO Inch output is active low. After clockwise adjustment, the temperature will trigger below 25 °C. Counterclockwise triggers above 25 °C.
3. When the potentiometer is adjusted clockwise until the “S Inch output indicator is on, it indicates that the adjustment range has exceeded the test threshold, and the counterclockwise adjustment until the adjustment cannot be made exceeds the threshold. When adjusting, the threshold cannot be exceeded, otherwise it will not work properly. When the potentiometer is used only for the inchDOinch port, it is not associated with the inchAOinch output.
4. The “AO Inch output is analog (voltage), which can be directly detected by the AD port of the MCU.
Package includes
1 x Soil Moisture Detection Module
1 x Probe
Weight | 0.027 kg |
---|
Customers Also Viewed
MQ137 Gas Sensor Module MQ-137 Ammonia Sensor Module NH3 Sensor Module
$45.91Sensor & Detector ModuleAdd to cartDescriptionSize:32mm X22mm X30mm length * width * heightMain chip:LM393, NH3 gas sensing probeWorking voltage:DC 5VFeatures1. It has a signal output indicator indication;2, dual signal output (analog output and TTL level output);3. The TTL output valid signal is low level; (when the output low level, the signal light is on, it can be connected to the …
MQ137 Gas Sensor Module MQ-137 Ammonia Sensor Module NH3 Sensor ModuleRead More
Waveshare BME280 Environmental Sensor Expansion Board Module Temperature/Humidity/Air Pressure
$29.04Sensor & Detector ModuleAdd to cartDocumentsManual:Click here to openSchematic:Click here to openDatasheet:Click here to openCode:Click here to openOverviewA tiny sensor with BME280 onboard, sensing environmental temperature, humidity, and barometric pressure. It supports both I2C and SPI interfaces, also is compatible with 3.3V/5V voltage levels.Due to its ultra small form factor, low power consumption, high precision with stability, the BME280 Environmental …
10pcs Yellow 22MM AC 60-500V Voltmeter Square Panel LED Digital Voltage Meter indicator Light
$31.54Electronic Accessories & SuppliesAdd to cartSpecificationsProduct Name:Digital Panel Light VoltmeterModel Number:AD101-22VMSInput Voltage:AC 60 to 500 Voltage (AC only)Rated CurrentBrightness:◎60cd/Square MetersVibration AC Frequency:2-80Hz AccelerationElectrical durability:◎30,000HHole Cutting Size:22mm/ 0.87” DiameterMaterial:Plastic, Metal, Electric ComponentsColor:YellowPackage included10 x Voltmeter
3pcs DC 9V To 24V Touch Switch Capacitive Touch Sensor Module LED Dimming Control Module
$12.31Sensor & Detector ModuleAdd to cartParameterInput voltage:DC 9V-24VOutput voltage:DC 9V-24VLoad power:30WLoad current:3AStandby current:10mAStandby power consumption:0.1WWorking environment temperature:-20°C-65°CModel:Touch_S (L40W10)Size:40*10*1.2mm (length*width*height)(The test condition:Vin=12V)Mode descriptionTouch_Sensor_S00 (normal switch)S00 mode, quick touch to switch the lighting on / off status, without dimming function, the effect is gradual.Touch_Sensor_S01 (unidirectional dimming)In the S01 mode, the quick touch switches the on / off status of the light; in …
3pcs DC 9V To 24V Touch Switch Capacitive Touch Sensor Module LED Dimming Control ModuleRead More
Excellway 10 Sets Mini Micro JST XH2.54mm 7 Pin Connector Plug Socket Wire Cable 150mm
$20.24ConnectorsAdd to cart10 Sets Mini Micro JST XH2.54 7-Pin Connector Plug With Wires Cables 150mmSpecificationProduct Name:Connector Plug With WiresPart:Connectors/WiringModel:XH 2.54mmFuel Source:ElectricLength:150mmPitch:2.54mmWire Size:24AWG 1007Quantity:10Pairs(10Pcs Single Head Wire + 10Pcs Socket )Package Includes10 Sets XH2.54 7Pin Single End 15cm Wire To Board Connector
Reviews
There are no reviews yet.