Digital Dual Display Time Cycle Timing Delay Relay Module 1500W 10A
$24.04
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
Product name:Timer
Display panel:76*34 mm Overall size:97*52*30 mm
Power supply:DC 5V 12V 24V
Timing range:0-999S/0-999M/0-999H
Functions:Timing/delay/cycle/covering more than 10 functions
Maximum power:Maximum operating current 10A
Maximum power:1500W
Manual
1. Before using, the user is reminded to pay attention to it. After setting the data, the user must wait for 6s. After 6s, the module will automatically save the data of the memory setting.
2. Short press the SET button once to enter the time setting mode. The large digital tube will flicker. Press the plus or minus button to adjust the timer time T1. After the T1 setting is completed, short press the SET button again. The small LED flashes, set the timer time T2, T2 time is set, short press the setup button again, the system will automatically save the memory setting time or wait 6s, 6s after the module will automatically memorize the saved data.
3. Press and hold the SET button to enter the parameter setting mode. There are two sets of parameters for the user to select P0, P1. In the current mode, short press the SET button to switch between P0 and P1. Under the P0 parameter, you can set the timing mode that is suitable for you by pressing the key. Under the P1 parameter, the working mode can be set by pressing the key.
4. P0–0:T1 timing time mode is second
5. P0–1:T1 timing time mode is minute
6. P0–2:T1 timing time mode is hour
7. P1–0:Relay pull-in after delay T1 (T1 timing)
8. P1–1:Relay releases after delay T1 (T1 timing)
9. P1–2:After the delay T1, the relay pulls in (T1 timing), and after the delay T2, the relay releases (T2 timing) and ends.
10. P1–3:The relay releases (T1 timing) after delay T1, and relay (T2 timing) pull-in after T2 delay.
11. P1–4:After the delay T1, the relay pulls in (T1 timing), and after delaying T2 time, the relay releases (T2 timing) and repeats the cycle.
12. P1–5:The relay releases (T1 timing) after delay T1, and relay pull-in (T2 timing) after T2 delay, and repeats the cycle.
For example
A customer needs 10 seconds to turn on and 20 seconds off, and repeats the cycle. The setting method is as follows
T1 setting time 10, T2 setting time 20
P0-0 (T1 timing range is second)
P1-5 (timer operating mode is:first work, then stop, and then repeats the cycle)
Package includes
1 x Timing Delay Relay Module
Weight | 0.056 kg |
---|
Customers Also Viewed
5Pcs A87 4 Channel Optocoupler Isolation Module High And Low Level Expansion Board
$17.08Other Module BoardAdd to cartDescription 1. Function:Use the low level to control the high level. Such as the use of single-chip 3V or 5V voltage control 9V or 12v voltage. 2. HVCC should not exceed 24V. Output OUT1 / OUT2 / OUT3 / OUT4 output current equal to HVCC / 5.1K, absorption current 500ma. 3. This module uses TLP281 …
5Pcs A87 4 Channel Optocoupler Isolation Module High And Low Level Expansion BoardRead More
3pcs DC 3.3V To 20V 5.8GHz Microwave Radar Sensor intelligent Trigger Sensor Switch Module
$16.24Sensor & Detector ModuleAdd to cartDescriptionIt uses Doppler radar technology, with auto-sensing capabilities to control other product,High sensitivity, sensor distance, reliability, wide angle sensor,Wide supply voltage range and other characteristics. Widely used in lighting situations,anti-theft alarm situations.Features1. microwave sensors using planar antenna and receiving echo.2. The switch is active sensors.3. The sensors emit a high-frequency electromagnetic waves and receives their …
3pcs DC 3.3V To 20V 5.8GHz Microwave Radar Sensor intelligent Trigger Sensor Switch ModuleRead More
24V Air Parking Heater Flame Sensor Igniters Flame Detecter 82306B for Webasto Air top 2000
$70.86Solar CollectorsAdd to cartSpecificationsBrand Name:AutoleaderMaterial:Silicon NitrideOEM:82306BItem weight:11gFeaturesThis product is mainly made of silicon nitride ceramic substrate, with tungsten filament as the heat source, tungsten wire embedded in silicon nitride matrix, via hot-press sintering process to form an organic whole, then through grinding, welding wire, thus made the ignition components.Fitmentfor Webasto Air Top 2000Package Included1x Parking Heater Senser
L293D WiFi Smart Robot Car Motor Driver Expansion Board Dual High Power H Bridge Based on ESP12E
$9.79Expansion Board & ShieldAdd to cartL293D WiFi Smart Robot Car Motor Driver Expansion Board Dual High Power H Bridge Based On ESP12E For Specifications 1. Motor power (VM):4.5 ~ 36V 2. Control power (VIN):4.5V ~ 9V(10V MAX) 3. Provide the shortcut connector (short by VM and VIM), thus can use 4. May use common power source (4.5V~9V) by shorting VM …
220V 1000W Hot Plate Electric Iron Burner Heating Stove Heater Household Laboratory Heating Equipments
$52.64Laboratory Heating EquipmentsAdd to cartSpecificationsType:Electric Stove BurnerPlug Type:EUColor:WhiteVoltage:220VPower:1000WRegulating temperature:5 LevelsMaterial:Stainless Steel + IronSize:14*14*5CM (5.5*5.5*2in)Features– Adopted iron shell, thicken panel, material sturdy and durable to use– Portable single burner with 500 watts of power– Powered by electric, do not need fuel, eco-friendly– Easy-to-use temperature-setting knob for low, medium, or high heat– Provides quick and sustained heat; power indicator light– Single …
Reviews
There are no reviews yet.